026 Pro Stihl Chainsaw Bar Oiler Not Working: [How To Troubleshoot]

As a chainsaw owner, there’s nothing more frustrating than having your bar oiler stop working. Not only is it a safety hazard, but it can also damage your chainsaw if the chain isn’t properly lubricated. If your 026 pro stihl chainsaw bar oiler isn’t working, don’t despair. There are a few simple troubleshooting steps you can take to quickly diagnose and resolve the problem.

In this guide, I’ll walk you through the process of troubleshooting a 026 pro stihl chainsaw bar oiler that’s not working. I’ll cover everything from checking the oil level to inspecting the oil pump. By the end of this guide, you’ll be able to get your chainsaw back up and running in no time.

: common causes

There are a few common causes for a 026 pro stihl chainsaw bar oiler to stop working. These include:

Low oil level: If the oil level in the chainsaw’s reservoir is too low, the oil pump won’t be able to deliver oil to the bar and chain.
Clogged oil filter: The oil filter can become clogged with sawdust and other debris, preventing oil from flowing to the bar and chain.
Damaged oil pump: The oil pump can be damaged if it’s run dry of oil or if it’s subjected to excessive vibration.
Blocked oil passages: The oil passages in the chainsaw can become blocked with sawdust and other debris, preventing oil from flowing to the bar and chain.

Troubleshooting a 026 pro stihl chainsaw bar oiler

If your 026 pro stihl chainsaw bar oiler isn’t working, follow these steps to troubleshoot the problem:

1. Check the oil level. The first thing you should do is check the oil level in the chainsaw’s reservoir. If the oil level is low, add oil to the reservoir until it reaches the full mark.
2. Inspect the oil filter. The next step is to inspect the oil filter. Remove the oil filter from the chainsaw and check for any signs of damage or clogging. If the oil filter is damaged, replace it with a new one. If the oil filter is clogged, clean it with a solvent and a soft brush.
3. Check the oil pump. If the oil level is good and the oil filter is clean, the next step is to check the oil pump. To do this, start the chainsaw and let it run for a few minutes. While the chainsaw is running, look for any leaks around the oil pump. If you see any leaks, the oil pump may be damaged and will need to be replaced.
4. Check the oil passages. If the oil level is good, the oil filter is clean, and the oil pump is not leaking, the next step is to check the oil passages. To do this, remove the bar and chain from the chainsaw. Then, use a small brush to clean out the oil passages. Be careful not to damage the oil passages.

If you’ve followed these steps and your 026 pro stihl chainsaw bar oiler is still not working, it’s time to take it to a qualified chainsaw repair technician.

Most Common Reasons Why 026 Pro Stihl Chainsaw Bar Oiler Not Working

1. Insufficient Oil Level

The most common reason for a chainsaw bar oiler not working is that there is not enough oil in the reservoir. Check the oil level before using the chainsaw and add oil as needed.

2. Clogged Oil Hose

Another common cause of a chainsaw bar oiler not working is a clogged oil hose. The oil hose can become clogged with sawdust or other debris, which prevents the oil from flowing to the bar and chain. To fix this problem, you will need to clean or replace the oil hose.

3. Faulty Oil Pump

The oil pump is responsible for pumping oil from the reservoir to the bar and chain. If the oil pump is faulty, it will not be able to pump oil to the bar and chain, which will cause the bar oiler to not work. To fix this problem, you will need to replace the oil pump.

4. Blocked Oil Passages

The oil passages are the channels that the oil travels through to get to the bar and chain. If these passages become blocked with sawdust or other debris, the oil will not be able to reach the bar and chain, which will cause the bar oiler to not work. To fix this problem, you will need to clean or replace the oil passages.

5. Incorrect Oil Viscosity

The oil viscosity is the thickness of the oil. If the oil is too thick, it will not flow through the oil passages as easily, which can cause the bar oiler to not work. If the oil is too thin, it will not lubricate the bar and chain properly, which can damage the chain and the bar. To fix this problem, you will need to use the correct oil viscosity for your chainsaw.

How to Troubleshoot: 026 Pro Stihl Chainsaw Bar Oiler Not Working

Check the Oil Reservoir

If you find that the bar oiler on your 026 Pro Stihl chainsaw is not working as it should
the first step is to check the oil reservoir. Ensure that it is adequately filled with the recommended bar and chain oil. A low oil level can lead to improper lubrication
causing the bar oiler to appear faulty.

Inspect the Oil Filter and Pickup Hose

Next
inspect the oil filter and pickup hose for any blockages or damage. A clogged or damaged oil filter or pickup hose can impede the flow of oil to the bar
resulting in inadequate lubrication. Clean or replace these components as necessary to ensure proper oil flow.

Examine the Oil Pump

The oil pump is a critical component of the bar oiling system. Carefully examine the oil pump for any signs of wear or damage. A faulty oil pump can disrupt the flow of oil to the bar
leading to lubrication issues. If the oil pump is found to be defective
it may need to be repaired or replaced by a qualified technician.

Check for Clogged Passages

Clogged oil passages can also cause the bar oiler to malfunction. Use compressed air to blow out any debris or sawdust that may be obstructing the oil passages. Ensuring that the oil passages are clear and free from obstructions is essential for the proper functioning of the bar oiler.

Inspect the Oiler Worm Gear

The oiler worm gear is responsible for driving the oil pump. Inspect the worm gear for any signs of wear or damage. A worn or damaged worm gear can hinder the operation of the oil pump
resulting in inadequate lubrication. If the worm gear is found to be faulty
it may need to be replaced to restore proper oiling function.

Conclusion

In conclusion
troubleshooting a 026 Pro Stihl chainsaw bar oiler that is not working involves a systematic inspection of various components. By checking the oil reservoir
inspecting the oil filter and pickup hose
examining the oil pump
clearing clogged passages
and inspecting the oiler worm gear
you can identify and address the root cause of the oiling issue.

FAQs: 026 Pro Stihl Chainsaw Bar Oiler Not Working

Why is my 026 Pro Stihl chainsaw bar oiler not working?

There are a few possible reasons why your 026 Pro Stihl chainsaw bar oiler may not be working.

The oiler may be clogged. If the oiler is clogged, it will not be able to pump oil to the bar and chain. To check if the oiler is clogged, remove the oiler cover and look inside. If you see any debris or build-up, clean it out with a small brush.
The oiler may be empty. If the oiler is empty, it will not be able to pump oil to the bar and chain. To check if the oiler is empty, remove the oiler cover and look inside. If you see no oil, fill the oiler with the correct type of oil.
The oiler may be damaged. If the oiler is damaged, it will not be able to pump oil to the bar and chain. To check if the oiler is damaged, remove the oiler cover and look inside. If you see any cracks or damage, replace the oiler.
The oiler may not be getting enough oil. If the oiler is not getting enough oil, it will not be able to pump oil to the bar and chain. To check if the oiler is getting enough oil, make sure that the oil tank is full and that the oil line is not kinked or blocked.

How do I fix a clogged 026 Pro Stihl chainsaw bar oiler?

To fix a clogged 026 Pro Stihl chainsaw bar oiler, you can follow these steps:

1. Remove the oiler cover.
2. Use a small brush to clean out any debris or build-up from the oiler.
3. Reinstall the oiler cover.

How do I check if the oiler is empty?

To check if the oiler is empty, you can follow these steps:

1. Remove the oiler cover.
2. Look inside the oiler. If you see no oil, the oiler is empty.
3. Reinstall the oiler cover.

How do I fill the oiler?

To fill the oiler, you can follow these steps:

1. Remove the oiler cover.
2. Add the correct type of oil to the oiler.
3. Reinstall the oiler cover.

How do I replace the oiler?

To replace the oiler, you can follow these steps:

1. Remove the oiler cover.
2. Remove the old oiler.
3. Install the new oiler.
4. Reinstall the oiler cover.

Also Read: 16 Craftsman Chainsaw Oiler Not Working

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *