Ar Blue Clean Pressure Washer Soap Dispenser Not Working: [Reasons & Fixes]

As a Pressure Washer Repair Technician, I’ve seen my fair share of AR Blue Clean pressure washer soap dispenser problems. It’s one of the most common issues that customers come to me with, and it can be incredibly frustrating. Not only does it prevent you from using your pressure washer to clean your home or property, but it can also be a safety hazard. If you don’t have soap in the dispenser, you could end up spraying water at high pressure directly onto your skin, which can cause serious injuries.

That’s why it’s so important to quickly diagnose and resolve the problem if your AR Blue Clean pressure washer soap dispenser isn’t working. In this guide, I’ll walk you through the steps of troubleshooting the issue and getting your pressure washer back up and running in no time.

Most Common Reasons Ar Blue Clean Pressure Washer Soap Dispenser Not Working

Blocked Soap Nozzle

The most common reason for a Blue Clean pressure washer soap dispenser not working is a blocked soap nozzle. This can be caused by a build-up of soap residue or debris. To fix this, remove the soap nozzle and clean it with a small brush.

Faulty Soap Pump

If the soap nozzle is clear but the soap dispenser is still not working, the soap pump may be faulty. To check this, turn on the pressure washer and listen for the soap pump running. If you don’t hear the pump running, or if you hear a grinding noise, the pump may be defective and will need to be replaced.

Low Soap Level

If the soap dispenser is not working, it may be because the soap level is too low. To check this, look at the soap reservoir and see if there is enough soap. If the soap level is low, add more soap to the reservoir.

Incorrect Soap Type

Some Blue Clean pressure washers require a specific type of soap. If you are using the wrong type of soap, the soap dispenser may not work properly. To fix this, make sure you are using the correct type of soap for your pressure washer.

Faulty Pressure Washer

If the soap dispenser is not working and you have checked all of the other possible causes, the problem may be with the pressure washer itself. In this case, you will need to take the pressure washer to a qualified technician for repairs.

How to Troubleshoot: AR Blue Clean Pressure Washer Soap Dispenser Not Working

Symptoms

There are a few different symptoms that can indicate that your AR Blue Clean pressure washer soap dispenser is not working properly. These include:

The soap dispenser is not dispensing any soap.

The soap dispenser is dispensing soap, but it is not coming out of the wand.

The soap dispenser is dispensing soap, but it is not coming out in a consistent stream.

The soap dispenser is dispensing soap, but it is coming out too quickly or too slowly.

Troubleshooting

If you are experiencing any of the symptoms listed above, there are a few things you can check to troubleshoot the problem.

1. Check the soap dispenser hose:

The first thing you should check is the soap dispenser hose. This hose connects the soap dispenser to the wand. If the hose is kinked or blocked, it can prevent the soap from flowing through the hose and out of the wand.

To check the hose, disconnect it from the wand and inspect it for any kinks or blockages. If you find a kink or blockage, try to straighten it out or remove the blockage. If you are unable to fix the problem, you will need to replace the hose.

2. Check the soap dispenser nozzle:

The next thing you should check is the soap dispenser nozzle. This nozzle is located at the end of the soap dispenser hose. If the nozzle is clogged, it can prevent the soap from flowing out of the hose.

To check the nozzle, remove it from the hose and inspect it for any clogs. If you find a clog, try to clear it out with a toothpick or needle. If you are unable to clear the clog, you will need to replace the nozzle.

3. Check the soap dispenser pump:

The soap dispenser pump is responsible for pushing the soap through the hose and out of the wand. If the pump is not working properly, it can prevent the soap from flowing out of the hose.

To check the pump, turn on the pressure washer and listen for the pump to start. If you do not hear the pump start, or if the pump sounds weak, the pump may be faulty. You will need to replace the pump.

4. Check the soap dispenser reservoir:

The soap dispenser reservoir is where the soap is stored. If the reservoir is empty, the soap dispenser will not be able to dispense any soap.

To check the reservoir, remove the lid and inspect it for any leaks. If you find a leak, you will need to repair or replace the reservoir.

5. Check the pressure washer settings:

The pressure washer settings can also affect the soap dispenser. If the pressure washer is set to too high of a pressure, it can cause the soap to be dispensed too quickly. If the pressure washer is set to too low of a pressure, it can cause the soap to be dispensed too slowly.

To check the pressure washer settings, consult the owner’s manual.

6. Reset the soap dispenser:

If you have tried all of the above troubleshooting steps and the soap dispenser is still not working, you may need to reset the soap dispenser. To reset the soap dispenser, follow these steps:

1. Turn off the pressure washer.
2. Disconnect the soap dispenser hose from the wand.
3. Locate the reset button on the soap dispenser.
4. Press and hold the reset button for 5 seconds.
5. Reconnect the soap dispenser hose to the wand.
6. Turn on the pressure washer.

If the soap dispenser is still not working after resetting it, you will need to contact a qualified technician for assistance.

Prevention

To prevent problems with your AR Blue Clean pressure washer soap dispenser, there are a few things you can do:

Keep the soap dispenser hose free of kinks and blockages.

Clean the soap dispenser nozzle regularly.

Inspect the soap dispenser pump regularly and replace it if it is faulty.

Keep the soap dispenser reservoir full.

Check the pressure washer settings and adjust them as needed.

Reset the soap dispenser if it is not working properly.

By following these tips, you can help to keep your AR Blue Clean pressure washer soap dispenser working properly for years to come.

Also Read: Bauer Electric Pressure Washer Not Working