How to Fix Your Black & Decker 3.5-Amp 6-Inch Hedge Trimmer When It Won’t Start

No Power

The trimmer’s battery is dead or not properly connected.
The trimmer’s power cord is damaged or not properly plugged in.
The trimmer’s switch is turned off.

Engine Won’t Start

The trimmer’s spark plug is dirty or damaged.
The trimmer’s carburetor is dirty or clogged.
The trimmer’s air filter is dirty or clogged.
The trimmer’s fuel tank is empty or the fuel is old and stale.
The trimmer’s engine is flooded.

Trimmer Won’t Stay Running

The trimmer’s air filter is dirty or clogged.
The trimmer’s carburetor is dirty or clogged.
The trimmer’s spark plug is dirty or damaged.
The trimmer’s engine is overheating.

Black And Decker 3.5 Amp 6 Hedge Trimmer Won’T Start

Reasons Why Your Black & Decker Hedge Trimmer Won’t Start

The trimmer is not plugged in. Make sure that the trimmer is plugged into an outlet and that the outlet is working.
The trimmer’s battery is dead. Charge the battery or replace it with a new one.
The trimmer’s switch is turned off. Turn the switch on.
The trimmer’s air filter is dirty. Clean the air filter.
The trimmer’s spark plug is dirty or damaged. Clean or replace the spark plug.
The trimmer’s carburetor is dirty or clogged. Clean the carburetor.
The trimmer’s engine is seized. Have the engine serviced or replaced.

How to Troubleshoot and Fix: Black and Decker 3.5 Amp 6 Hedge Trimmer Won’t Start

Check the Power Source

Firstly
ensure that the hedge trimmer is properly connected to a power source. Double-check the power outlet and the extension cord
if in use
to rule out any connectivity issues.

Inspect the Extension Cord

Examine the extension cord for any signs of damage or wear. A damaged cord can prevent the hedge trimmer from receiving adequate power
leading to startup issues.

Examine the Hedge Trimmer’s Blades

Carefully inspect the trimmer’s blades for any obstructions or debris that may be hindering their movement. Clean the blades thoroughly to ensure smooth operation.

Check the Power Button

Ensure that the power button or trigger is fully engaged when attempting to start the trimmer. Sometimes
a loose or faulty power button can prevent the trimmer from starting.

Inspect the Motor

If the trimmer still won’t start
it’s essential to inspect the motor for any signs of damage or malfunction. Look for loose connections or burnt components that may be impeding the trimmer’s operation.

Examine the Power Cord

Carefully examine the power cord for any fraying or damage. A damaged power cord can disrupt the flow of electricity to the trimmer
resulting in startup issues.

Check the Circuit Breaker

In some cases
a tripped circuit breaker can prevent the trimmer from starting. Locate the circuit breaker on the trimmer and reset it to see if this resolves the issue.

Inspect the Spark Plug

If your hedge trimmer has a gas-powered engine
check the spark plug for signs of wear or damage. A faulty spark plug can prevent the engine from starting.

Conclusion

By following these troubleshooting steps
you can identify and address the issues preventing your Black and Decker 3.5 Amp 6 Hedge Trimmer from starting. If the problem persists
it may be necessary to seek professional repair services to ensure the trimmer operates optimally.

Also Read: Black And Decker 6 Hedge Trimmer Won’T Start