Black And Decker Chainsaw Not Working: [Proven Ways To Fix]
A Black and Decker chainsaw that is not working can be a major inconvenience. It can prevent you from completing tasks around the house or yard, and it can also be dangerous. If your chainsaw is not working, it is important to troubleshoot the problem quickly so that you can restore functionality to the tool.
In this guide, I will walk you through the steps to troubleshoot a Black and Decker chainsaw that is not working. I will cover common causes of the problem, as well as how to diagnose and resolve each one. By the end of this guide, you will be able to identify and fix the problem with your chainsaw so that you can get back to using it.
Most Common Reasons Why Black And Decker Chainsaw Not Working
1. Chain is too tight
If the chain is too tight, it will not be able to move smoothly around the bar and will cause the chainsaw to stall. To check the chain tension, turn the chainsaw off and release the brake. Use a chainsaw chain gauge to measure the tension. The chain should have about 1/8-inch of play between the chain and the bar. If the chain is too tight, loosen the tensioning screw until the chain has the correct amount of play.
2. Chain is too loose
If the chain is too loose, it will be able to move too freely around the bar and will cause the chainsaw to jump and kick back. To check the chain tension, turn the chainsaw off and release the brake. Use a chainsaw chain gauge to measure the tension. The chain should have about 1/8-inch of play between the chain and the bar. If the chain is too loose, tighten the tensioning screw until the chain has the correct amount of play.
3. Bar oil is low
The bar oil lubricates the chain and bar and helps to prevent them from overheating. If the bar oil is low, the chain will not be able to move smoothly around the bar and will cause the chainsaw to stall. To check the bar oil level, turn the chainsaw off and remove the bar cover. The bar oil reservoir should be about half full. If the bar oil level is low, add more bar oil to the reservoir.
4. Chain is dull
A dull chain will not be able to cut through wood efficiently and will cause the chainsaw to work harder. This can lead to the chainsaw stalling or overheating. To check the sharpness of the chain, use a file to sharpen the teeth. The teeth should be sharp and evenly spaced.
5. Spark plug is fouled
A fouled spark plug will prevent the chainsaw from starting or running properly. To check the spark plug, remove it from the chainsaw and inspect it. The spark plug should be clean and dry. If the spark plug is fouled, clean it with a spark plug cleaner or replace it with a new spark plug.
6. Carburetor is dirty
A dirty carburetor can cause the chainsaw to run rough or stall. To clean the carburetor, remove it from the chainsaw and disassemble it. Clean the carburetor parts with carburetor cleaner and reassemble the carburetor.
7. Air filter is dirty
A dirty air filter can restrict the flow of air to the carburetor and cause the chainsaw to run rough or stall. To check the air filter, remove it from the chainsaw and inspect it. The air filter should be clean and free of debris. If the air filter is dirty, clean it with a clean cloth or replace it with a new air filter.
How to Troubleshoot: Black and Decker Chainsaw Not Working
Symptoms
There are a few different symptoms that can indicate that your Black and Decker chainsaw is not working properly. These include:
The chainsaw won’t start
The chainsaw starts but won’t stay running
The chainsaw is running but not cutting
The chainsaw is making a strange noise
Troubleshooting
If your Black and Decker chainsaw is not working properly, you can troubleshoot the problem by following these steps:
1. Check the fuel tank. Make sure that the fuel tank is full and that the fuel valve is open.
2. Check the spark plug. Remove the spark plug and clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.
3. Check the air filter. Remove the air filter and clean it with a clean, dry cloth. If the air filter is damaged, replace it with a new one.
4. Check the carburetor. The carburetor is responsible for mixing the fuel and air in the correct proportions. If the carburetor is dirty or clogged, it can cause the chainsaw to not start or run properly. You can clean the carburetor yourself or take it to a qualified technician for service.
5. Check the chain tension. The chain tension should be adjusted so that it is snug against the bar but not so tight that it is difficult to move. If the chain is too loose, it can come off the bar and cause injury. If the chain is too tight, it can damage the engine.
Additional Tips
Here are a few additional tips to help you keep your Black and Decker chainsaw running smoothly:
Store your chainsaw in a cool, dry place. This will help to prevent the engine from corroding and the fuel from evaporating.
Inspect your chainsaw regularly for signs of wear and tear. Replace worn or damaged parts as soon as possible to prevent further damage.
Follow the manufacturer’s instructions for use and maintenance. This will help to ensure that your chainsaw operates safely and efficiently.
By following these tips, you can help to keep your Black and Decker chainsaw running smoothly for many years to come.
FAQs: Black & Decker Chainsaw Not Working
Why is my Black & Decker chainsaw not working?
There are a few possible reasons why your Black & Decker chainsaw may not be working. Here are some of the most common causes:
The chainsaw is not getting enough fuel. Make sure that the fuel tank is full and that the fuel line is clear.
The chainsaw is not getting enough air. Check the air filter to make sure that it is clean and free of debris.
The chainsaw is not getting enough spark. Check the spark plug to make sure that it is clean and properly gapped.
The chainsaw is overheating. Let the chainsaw cool down before operating it again.
The chainsaw is damaged. If you have checked all of the above and the chainsaw is still not working, it may be damaged and need to be repaired or replaced.
How do I fix a Black & Decker chainsaw that is not getting enough fuel?
To fix a Black & Decker chainsaw that is not getting enough fuel, follow these steps:
1. Make sure that the fuel tank is full.
2. Check the fuel line to make sure that it is clear of debris.
3. If the fuel line is clogged, you can try to clear it with a small wire or needle.
4. If the fuel line is damaged, you will need to replace it.
How do I fix a Black & Decker chainsaw that is not getting enough air?
To fix a Black & Decker chainsaw that is not getting enough air, follow these steps:
1. Check the air filter to make sure that it is clean and free of debris.
2. If the air filter is dirty, you can clean it with a soft brush or cloth.
3. If the air filter is damaged, you will need to replace it.
How do I fix a Black & Decker chainsaw that is not getting enough spark?
To fix a Black & Decker chainsaw that is not getting enough spark, follow these steps:
1. Check the spark plug to make sure that it is clean and properly gapped.
2. If the spark plug is dirty, you can clean it with a wire brush.
3. If the spark plug is damaged, you will need to replace it.
4. Make sure that the spark plug wire is connected securely to the spark plug.
How do I fix a Black & Decker chainsaw that is overheating?
To fix a Black & Decker chainsaw that is overheating, follow these steps:
1. Let the chainsaw cool down completely before attempting to fix it.
2. Check the air filter to make sure that it is clean and free of debris.
3. If the air filter is dirty, you can clean it with a soft brush or cloth.
4. Check the spark plug to make sure that it is clean and properly gapped.
5. If the spark plug is dirty, you can clean it with a wire brush.
6. Make sure that the spark plug wire is connected securely to the spark plug.
7. Check the carburetor to make sure that it is clean and adjusted properly.
8. If the carburetor is dirty, you can clean it with a carburetor cleaner.
9. If the carburetor is not adjusted properly, you will need to adjust it.
How do I fix a Black & Decker chainsaw that is damaged?
If your Black & Decker chainsaw is damaged, you will need to take it to a qualified service center for repairs.
Note: These are just some of the most common causes of a Black & Decker chainsaw not working. If you have tried these steps and your chainsaw is still not working, you may need to take it to a qualified service center for repairs.
Also Read: Bosch Chainsaw Oiler Not Working