Black & Decker Electric Hedge Trimmer Won’t Start? Here’s the Fix!
1. No power
The trimmer is not plugged in.
The power cord is damaged.
The switch is turned off.
The circuit breaker is tripped.
2. Faulty spark plug
The spark plug is dirty.
The spark plug is damaged.
3. Clogged air filter
The air filter is dirty.
4. Low oil level
The oil level is below the minimum level.
5. Bad battery
The battery is dead.
The battery terminals are corroded.
Black And Decker Electric Hedge Trimmer Won’T Start
Reasons Why a Black & Decker Electric Hedge Trimmer Won’t Start
The trimmer is not plugged in. Make sure the trimmer is plugged into an outlet and that the outlet is working.
The trimmer’s battery is dead. If the trimmer is battery-powered, try charging the battery or replacing it with a new one.
The trimmer’s switch is turned off. Make sure the switch is turned to the On position.
The trimmer’s spark plug is dirty or damaged. Clean or replace the spark plug.
The trimmer’s air filter is dirty. Clean the air filter.
The trimmer’s carburetor is dirty or clogged. Clean or rebuild the carburetor.
The trimmer’s engine is seized. Have the engine serviced or replaced.
How to Troubleshoot And Fix:
Symptoms
There are a few different symptoms that may indicate that your Black & Decker electric hedge trimmer is not starting properly. These include:
The trimmer won’t turn on at all
The trimmer turns on but doesn’t start cutting
The trimmer starts cutting but then stops
The trimmer makes a strange noise when it starts
The trimmer vibrates excessively
Troubleshooting
If your Black & Decker electric hedge trimmer is not starting properly, you can troubleshoot the problem by following these steps:
1. Check the power cord:
Make sure that the power cord is plugged into an outlet and that the outlet is working properly.
2. Check the switch:
Make sure that the switch is turned on.3. Check the battery:
If your trimmer is battery-powered, make sure that the battery is charged and properly inserted.
4. Check the spark plug:
If your trimmer is gas-powered, remove the spark plug and check to see if it is clean and free of debris.
5. Check the air filter:
If your trimmer is gas-powered, remove the air filter and check to see if it is dirty or clogged.
6. Check the carburetor:
If your trimmer is gas-powered, you may need to clean or adjust the carburetor.
Fixing the Problem
Once you have identified the problem, you can fix it by following these steps:
1. If the power cord is not plugged in or the outlet is not working, plug the power cord into a different outlet:
2. If the switch is not turned on, turn it on:
3. If the battery is not charged or properly inserted, charge the battery or insert it properly:
4. If the spark plug is dirty or clogged, clean or replace the spark plug:
5. If the air filter is dirty or clogged, clean or replace the air filter:
6. If the carburetor needs to be cleaned or adjusted, clean or adjust the carburetor:
Preventing Problems
You can prevent problems with your Black & Decker electric hedge trimmer by following these tips:
Store your trimmer in a dry place:
Keep the blades sharp:
Clean the trimmer regularly:
Inspect the trimmer for damage before each use:
Follow the manufacturer’s instructions for use and maintenance:
By following these tips, you can help to keep your Black & Decker electric hedge trimmer running smoothly for years to come.
Also Read: Black And Decker Hedge Trimmer Won’T Start