Blades Won’T Move On Hedge Trimmer [Reasons & Fixes]

There’s nothing more frustrating than a hedge trimmer that won’t start. You’re trying to get your yard in shape, but the trimmer is just sitting there, mocking you. If you’re dealing with this problem, you’re not alone. It’s a common issue that can be caused by a number of things. In this guide, I’ll walk you through the steps to troubleshoot the problem and get your hedge trimmer up and running again. So if you’re ready to put an end to your frustration, keep reading!

Reasons Why Blades Won’T Move On Hedge Trimmer

1. Blocked or damaged blade

The blades may be blocked by debris, such as leaves or twigs.
The blades may be damaged, such as bent or broken.

2. Loose or damaged drive belt

The drive belt may be loose or damaged, which will prevent the blades from moving.

3. Faulty or damaged engine

The engine may be faulty or damaged, which will prevent the blades from moving.

4. Stuck safety switch

The safety switch may be stuck in the off position, which will prevent the blades from moving.

5. Misaligned blades

The blades may be misaligned, which will prevent them from moving properly.

How to Troubleshoot: Hedge Trimmer Blades Won’t Move

Your hedge trimmer is a valuable tool for keeping your hedges looking neat and tidy. But what happens when the blades won’t move? This can be a frustrating problem, but it’s usually easy to fix. In this article, we’ll walk you through the steps to troubleshoot a hedge trimmer that won’t move.

Step 1: Check the power

The first thing you need to do is check to make sure that the hedge trimmer is plugged in and turned on. If it’s not, plug it in and turn it on. If the blades still don’t move, move on to the next step.

Step 2: Check the switch

The next thing you need to check is the switch. Make sure that it’s turned to the On position. If it is, move on to the next step.

Step 3: Check the blade oil

Hedge trimmers require regular lubrication to keep the blades moving smoothly. If the blades are dry, they may not move properly. Check the owner’s manual for the recommended type of oil and how often it should be applied. If the blades are dry, apply a few drops of oil to each blade and then try to start the hedge trimmer again.

Step 4: Check the blades

If the blades are dull, they may not be able to cut through the branches. Try sharpening the blades and then try to start the hedge trimmer again.

Step 5: Check the drive belt

The drive belt is responsible for transferring power from the motor to the blades. If the belt is damaged or broken, it will prevent the blades from moving. Check the drive belt for any signs of damage or wear. If the belt is damaged, it will need to be replaced.

Step 6: Take your hedge trimmer to a professional

If you’ve tried all of the above steps and the hedge trimmer still won’t move, it’s time to take it to a professional. A qualified technician will be able to diagnose the problem and repair it properly.

Conclusion

Hedge trimmers are a valuable tool for keeping your hedges looking neat and tidy. But when they don’t work properly, it can be a frustrating experience. By following these troubleshooting steps, you can usually fix the problem yourself. However, if you’ve tried everything and the hedge trimmer still won’t move, it’s time to take it to a professional.

Also Read: Blades Won’T Move On Poulon Hedge Trimmer

FAQs: Hedge Trimmer Blades Won’t Move

Why won’t my hedge trimmer blades move?

There are a few possible reasons why your hedge trimmer blades might not be moving. Here are the most common:

The blades are stuck: This can happen if the blades become gummed up with dirt, debris, or sap. To fix this, you can try cleaning the blades with a wire brush or a putty knife.

The blade guard is engaged: The blade guard is a safety feature that prevents the blades from moving when the trimmer is not in use. To check if the blade guard is engaged, look for a red button or lever on the side of the trimmer. If the button or lever is pushed in, the blade guard is engaged and the blades will not move. To disengage the blade guard, push the button or lever out.

The trimmer is not turned on: Make sure that the trimmer is turned on and that the switch is set to On.

The trimmer is not getting enough power: If the trimmer is not getting enough power, the blades will not move. Check the battery or fuel level to make sure that the trimmer has enough power.

How do I fix a hedge trimmer that won’t move?

To fix a hedge trimmer that won’t move, you can try the following steps:

1. Check the blades: Make sure that the blades are not stuck and that the blade guard is not engaged.
2. Turn on the trimmer: Make sure that the trimmer is turned on and that the switch is set to On.
3. Check the battery or fuel level: Make sure that the trimmer has enough power.
4. Clean the trimmer: If the trimmer is dirty, clean it with a wire brush or a putty knife.
5. Take the trimmer to a repair shop: If you have tried all of the above steps and the trimmer still won’t move, you may need to take it to a repair shop.

What should I do if my hedge trimmer blades are stuck?

If your hedge trimmer blades are stuck, you can try the following steps to free them:

1. Turn off the trimmer: Make sure that the trimmer is turned off and that the switch is set to Off.
2. Use a putty knife or a wire brush to loosen the blades: Gently pry the blades apart with the putty knife or wire brush.
3. Apply a lubricant to the blades: This will help to prevent the blades from sticking in the future.

How can I prevent my hedge trimmer blades from getting stuck?

To prevent your hedge trimmer blades from getting stuck, you can take the following steps:

Clean the trimmer regularly: This will help to remove dirt, debris, and sap from the blades, which can cause them to stick.

Lubricate the blades regularly: This will help to keep the blades moving smoothly and prevent them from sticking.

Avoid using the trimmer on wet or damp surfaces: This can cause the blades to rust and stick.

Do not over-tighten the blades: This can cause the blades to become warped and stick.

What do I do if my hedge trimmer blades are damaged?

If your hedge trimmer blades are damaged, you can try the following steps to replace them:

1. Turn off the trimmer: Make sure that the trimmer is turned off and that the switch is set to Off.
2. Remove the old blades: Use a wrench to loosen the bolts that hold the old blades in place.
3. Install the new blades: Align the new blades with the slots in the trimmer and tighten the bolts to secure them in place.

Note: If you are not comfortable replacing the blades yourself, you can take the trimmer to a repair shop.