Blades Won’T Move On Poulon Hedge Trimmer [Reasons + Fixed]

Is there anything else that I can help you with

Reasons Why Blades Won’T Move On Poulon Hedge Trimmer

1. Poulon Hedge Trimmer Blade Bent

The most common reason why a Poulon hedge trimmer blade won’t move is because it is bent. This can happen if the hedge trimmer is dropped or if it hits a hard object.
A bent blade will not be able to cut through branches properly and can also damage the hedge trimmer itself.
To check if the blade is bent, remove the blade from the hedge trimmer and inspect it carefully. If the blade is bent, you can try to straighten it out using a vice or a hammer. However, if the blade is severely bent, it is best to replace it with a new one.

2. Poulon Hedge Trimmer Blade Chain Too Tight

Another common reason why a Poulon hedge trimmer blade won’t move is because the chain is too tight. This can happen if the chain is not properly lubricated or if it is not adjusted correctly.
A tight chain will not be able to move freely and can cause the hedge trimmer to stall.
To check if the chain is too tight, remove the cover from the hedge trimmer and inspect the chain. The chain should be able to move freely up and down the bar. If the chain is too tight, you can loosen it by turning the adjustment screw on the side of the hedge trimmer.

3. Poulon Hedge Trimmer Blade Chain Too Loose

A loose chain can also cause a Poulon hedge trimmer blade to not move. This can happen if the chain is not properly lubricated or if it is not adjusted correctly.
A loose chain will not be able to grip the branches properly and can cause the hedge trimmer to jump or stall.
To check if the chain is too loose, remove the cover from the hedge trimmer and inspect the chain. The chain should be snug against the bar, but it should not be so tight that it is difficult to move. If the chain is too loose, you can tighten it by turning the adjustment screw on the side of the hedge trimmer.

4. Poulon Hedge Trimmer Blade Worn Out

Over time, the blades on a Poulon hedge trimmer will wear out and become dull. This can cause the hedge trimmer to not cut through branches properly and can also damage the hedge trimmer itself.
To check if the blades are worn out, remove the blade from the hedge trimmer and inspect it carefully. The teeth on the blade should be sharp and evenly spaced. If the teeth are dull or damaged, you will need to replace the blade with a new one.

How to Troubleshoot: Blades Won’t Move on Poulan Hedge Trimmer

Your Poulan hedge trimmer is a powerful tool that can help you keep your hedges looking their best. But what happens when the blades won’t move? This can be a frustrating problem, but it’s usually easy to fix. In this guide, we’ll walk you through the steps to troubleshoot a Poulan hedge trimmer that’s not working properly.

Troubleshooting Steps

1. Check the power cord:
Make sure that the power cord is plugged in securely and that the switch is turned on. If the power cord is damaged, you’ll need to replace it.

2. Check the spark plug:
Remove the spark plug and inspect it for damage. If the spark plug is dirty, clean it with a wire brush. If the spark plug is damaged, you’ll need to replace it.3. Check the air filter:
Remove the air filter and inspect it for dirt and debris. If the air filter is dirty, clean it with a dry cloth. If the air filter is damaged, you’ll need to replace it.

4. Check the fuel filter:
Remove the fuel filter and inspect it for dirt and debris. If the fuel filter is dirty, clean it with a dry cloth. If the fuel filter is damaged, you’ll need to replace it.

5. Check the carburetor:
The carburetor is a complex component, so it’s best to have this checked by a qualified technician.

6. Check the blades:
Make sure that the blades are sharp and free of debris. If the blades are dull, you’ll need to sharpen them. If the blades are damaged, you’ll need to replace them.

Conclusion

By following these troubleshooting steps, you can usually fix a Poulan hedge trimmer that’s not working properly. If you’re unable to fix the problem yourself, you can always take your hedge trimmer to a qualified technician for repairs.

Also Read: Can Start My Stihl Hedge Trimmer Won’T

FAQs: Poulon Hedge Trimmer Blades Won’t Move

Why won’t the blades on my Poulon hedge trimmer move?

There are a few possible reasons why the blades on your Poulon hedge trimmer won’t move. Here are some of the most common:

The blades are stuck: This can happen if the blades become clogged with debris, such as leaves or twigs. To fix this, you will need to clean the blades thoroughly.

The blades are dull: If the blades are dull, they will not be able to cut through branches and leaves effectively. To fix this, you will need to sharpen the blades.

The motor is not working: If the motor is not working, the blades will not be able to move. To fix this, you will need to troubleshoot the motor.

How do I clean the blades on my Poulon hedge trimmer?

To clean the blades on your Poulon hedge trimmer, you will need:

A soft cloth
A small brush
A can of compressed air

First, turn off the hedge trimmer and unplug it from the power outlet. Then, use the soft cloth to wipe down the blades. Be careful not to use too much pressure, as you could damage the blades. Next, use the brush to remove any debris that is stuck between the blades. Finally, use the compressed air to blow away any remaining debris.

How do I sharpen the blades on my Poulon hedge trimmer?

To sharpen the blades on your Poulon hedge trimmer, you will need:

A file
A vise

First, clamp the blades in the vise so that they are secure. Then, use the file to sharpen the blades. Be careful not to file too much material away, as you could damage the blades. Once the blades are sharpened, test them by cutting through a piece of wood.

How do I troubleshoot the motor on my Poulon hedge trimmer?

If the motor on your Poulon hedge trimmer is not working, you will need to troubleshoot the problem. Here are some things you can check:

Is the hedge trimmer plugged in? Make sure that the hedge trimmer is plugged into an outlet that is working properly.

Is the switch turned on? Make sure that the switch on the hedge trimmer is turned on.

Is the motor overheating? If the motor is overheating, it will not work properly. Allow the motor to cool down before using it again.

Is the motor damaged? If the motor is damaged, it will not work properly. You will need to replace the motor.

What should I do if I can’t fix the problem myself?

If you cannot fix the problem yourself, you should take the hedge trimmer to a qualified technician. They will be able to diagnose the problem and repair it properly.