Briggs And Stratton Pressure Washer Detergent Tank Not Working [Causes & Proven Solutions]

Your Briggs and Stratton pressure washer is a powerful tool that can help you clean your home, driveway, and other outdoor surfaces. But when the detergent tank isn’t working properly, it can be a major inconvenience. Not only is it frustrating to have to clean your pressure washer without detergent, but it can also damage your equipment.

In this guide, we’ll troubleshoot the common issue of a . We’ll cover everything from simple fixes like clearing a clog to more complex repairs like replacing a faulty valve. By the end of this guide, you’ll be able to get your pressure washer back up and running in no time.

Reasons Why Briggs And Stratton Pressure Washer Detergent Tank Not Working

Detergent Tank Not Attached Properly

The detergent tank may not be attached properly to the pressure washer. Make sure that the tank is securely connected to the pressure washer and that the hose is not kinked.

Detergent Tank is Clogged

The detergent tank may be clogged, preventing the detergent from flowing through the hose and into the spray gun. To clean the detergent tank, remove the tank from the pressure washer and use a small brush to clean out any debris or buildup.

Detergent Tank is Empty

If the detergent tank is empty, the pressure washer will not be able to dispense detergent. Make sure that the tank is filled with detergent before using the pressure washer.

Detergent Hose is Clogged

The detergent hose may be clogged, preventing the detergent from flowing through the hose and into the spray gun. To clean the detergent hose, remove the hose from the pressure washer and use a small brush to clean out any debris or buildup.

Detergent Spray Gun is Clogged

The detergent spray gun may be clogged, preventing the detergent from being sprayed out of the gun. To clean the detergent spray gun, remove the nozzle from the gun and use a small brush to clean out any debris or buildup.

How to Troubleshoot: Briggs and Stratton Pressure Washer Detergent Tank Not Working

Symptoms

There are a few symptoms that may indicate that the detergent tank on your Briggs and Stratton pressure washer is not working properly. These include:

The detergent tank is not filling up with detergent.
The detergent is not being dispensed from the detergent tank.
The detergent is being dispensed too quickly or too slowly.
The detergent is not being dispensed evenly.

Causes

There are a number of things that could cause the detergent tank on your Briggs and Stratton pressure washer to not work properly. These include:

A clogged detergent filter.
A faulty detergent pump.
A problem with the detergent hose.
A problem with the detergent valve.

Troubleshooting

To troubleshoot the problem with your Briggs and Stratton pressure washer’s detergent tank, you will need to:

1. Check the detergent filter.
2. Check the detergent pump.
3. Check the detergent hose.
4. Check the detergent valve.

Checking the Detergent Filter

The detergent filter is located on the bottom of the detergent tank. To check the filter, remove the cap from the detergent tank and inspect the filter. If the filter is clogged, clean it with a brush or replace it with a new filter.

Checking the Detergent Pump

The detergent pump is located inside the detergent tank. To check the pump, turn on the pressure washer and listen for the pump to run. If the pump does not run, or if it runs but does not dispense detergent, the pump may be faulty. You will need to replace the pump.

Checking the Detergent Hose

The detergent hose connects the detergent tank to the pressure washer. To check the hose, inspect it for kinks or leaks. If the hose is kinked, straighten it out. If the hose is leaking, replace it with a new hose.

Checking the Detergent Valve

The detergent valve is located on the pressure washer. To check the valve, turn on the pressure washer and spray the detergent onto a surface. If the detergent does not come out of the nozzle, the valve may be faulty. You will need to replace the valve.

Conclusion

By following these troubleshooting steps, you can usually fix the problem with your Briggs and Stratton pressure washer’s detergent tank. If you are unable to fix the problem, you may need to contact a qualified technician for assistance.

Also Read: Briggs And Stratton Pressure Washer Not Working

FAQs: Briggs and Stratton Pressure Washer Detergent Tank Not Working

Why is my Briggs and Stratton pressure washer detergent tank not working?

There are a few possible reasons why your Briggs and Stratton pressure washer detergent tank might not be working. Here are some of the most common causes:

The detergent tank is empty: Make sure that the detergent tank is filled with the correct type of detergent.

The detergent tank is clogged: The detergent tank can become clogged with dirt, debris, or soap scum. To clean the detergent tank, remove the tank from the pressure washer and rinse it out with warm water.

The detergent hose is kinked or damaged: The detergent hose can become kinked or damaged, which can prevent the detergent from flowing properly. Check the detergent hose for any kinks or damage and replace it if necessary.

The detergent pump is not working properly: The detergent pump can malfunction if it is not getting enough power or if it is clogged. To check the detergent pump, turn on the pressure washer and listen for the pump to run. If you do not hear the pump running, the pump may be malfunctioning and will need to be repaired or replaced.

How do I fix my Briggs and Stratton pressure washer detergent tank?

To fix your Briggs and Stratton pressure washer detergent tank, you will need to identify the cause of the problem. Once you have identified the cause of the problem, you can follow the steps below to fix it:

If the detergent tank is empty, fill it with the correct type of detergent:

If the detergent tank is clogged, remove the tank from the pressure washer and rinse it out with warm water:

If the detergent hose is kinked or damaged, replace it with a new hose:

If the detergent pump is not working properly, have it repaired or replaced by a qualified technician:

What type of detergent should I use in my Briggs and Stratton pressure washer?

You should use a detergent that is specifically designed for use in pressure washers. This type of detergent will be able to dissolve dirt, grime, and grease quickly and easily. Some of the most popular detergents for pressure washers include:

Simple Green Power Washer Detergent

Dawn Power Washer Detergent

Meguiar’s Ultimate Pressure Washer Detergent

Murphy’s Oil Soap

How much detergent should I use in my Briggs and Stratton pressure washer?

The amount of detergent you use will depend on the size of your pressure washer and the amount of dirt, grime, and grease you are trying to remove. A general rule of thumb is to use one ounce of detergent per gallon of water. However, you may need to adjust the amount of detergent you use depending on the specific conditions.

How do I use detergent in my Briggs and Stratton pressure washer?

To use detergent in your Briggs and Stratton pressure washer, follow these steps:

1. Fill the detergent tank with the correct type of detergent.
2. Turn on the pressure washer and allow the detergent to flow through the system.
3. Spray the detergent onto the surface you want to clean.
4. Rinse the surface with clean water.

By following these steps, you can ensure that your Briggs and Stratton pressure washer is properly maintained and that you are getting the most out of your cleaning experience.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *