Briggs And Stratton Pressure Washer Not Working [You Should Try This]
Your Briggs and Stratton pressure washer is one of the most valuable tools in your home. It can help you clean everything from your driveway to your siding. But when it doesn’t work, it can be a major inconvenience.
If your Briggs and Stratton pressure washer isn’t working, don’t despair. There are a few common causes for this problem, and most of them are easy to fix. In this guide, we’ll walk you through the steps to troubleshoot your pressure washer and get it back up and running in no time.
We understand how frustrating it can be when your pressure washer isn’t working, so we’ll make sure to keep this guide as short and concise as possible. We’ll also provide plenty of visuals to help you along the way.
So if your Briggs and Stratton pressure washer isn’t working, read on for all the information you need to get it fixed!
Reasons Why Briggs And Stratton Pressure Washer Not Working
No Power
The pressure washer is not plugged in or the outlet is not working.
The pressure washer’s power cord is damaged.
The pressure washer’s motor is not working.
No Water Flow
The water supply to the pressure washer is turned off.
The water hose is kinked or blocked.
The pressure washer’s pump is not working.
High Pressure
The pressure washer’s pressure regulator is set too high.
The pressure washer’s pump is not working properly.
Low Pressure
The pressure washer’s pressure regulator is set too low.
The pressure washer’s pump is not working properly.
The pressure washer’s water filter is clogged.
Uneven Pressure
The pressure washer’s wand is clogged.
The pressure washer’s nozzle is clogged.
The pressure washer’s pump is not working properly.
How to Troubleshoot: Briggs and Stratton Pressure Washer Not Working
Symptoms of a Briggs and Stratton Pressure Washer Not Working
There are a few different symptoms that can indicate that your Briggs and Stratton pressure washer is not working properly. These include:
The pressure washer won’t start
The pressure washer starts but won’t build pressure
The pressure washer leaks
The pressure washer makes strange noises
The pressure washer’s water output is weak
Troubleshooting a Briggs and Stratton Pressure Washer Not Working
If your Briggs and Stratton pressure washer is not working properly, you can troubleshoot the problem by following these steps:
1. Check the power supply:
Make sure that the pressure washer is plugged in and that the power switch is turned on.
2. Check the oil level:
The oil level should be between the full and add marks on the oil dipstick. If the oil level is low, add oil to the pressure washer until it reaches the full mark.3. Check the air filter:
The air filter should be clean and free of debris. If the air filter is dirty, remove it and clean it with a mild detergent and water. Allow the air filter to dry completely before reinstalling it.
4. Check the fuel filter:
The fuel filter should be clean and free of debris. If the fuel filter is dirty, remove it and replace it with a new one.
5. Check the spark plug:
The spark plug should be clean and free of deposits. If the spark plug is dirty, remove it and clean it with a wire brush. If the spark plug is damaged, replace it with a new one.
6. Check the fuel line:
The fuel line should be free of kinks or obstructions. If the fuel line is damaged, replace it with a new one.
7. Check the pressure washer pump:
The pressure washer pump may be damaged if it is making strange noises or if the water output is weak. If you suspect that the pressure washer pump is damaged, you should have it serviced by a qualified technician.
Preventing Problems with Your Briggs and Stratton Pressure Washer
You can help prevent problems with your Briggs and Stratton pressure washer by following these tips:
Use the right oil:
Use the oil type and viscosity specified in the owner’s manual for your pressure washer.
Keep the air filter clean:
Clean the air filter regularly to prevent dirt and debris from entering the engine.
Change the fuel filter regularly:
Change the fuel filter according to the recommendations in the owner’s manual for your pressure washer.
Inspect the spark plug regularly:
Inspect the spark plug regularly for wear and tear. Replace the spark plug if it is damaged.
Store the pressure washer properly:
When you are not using the pressure washer, store it in a cool, dry place.
By following these tips, you can help keep your Briggs and Stratton pressure washer in good working order and prevent problems from occurring.
Also Read: Briggs And Stratton Pressure Washer Soap Not Working
FAQs: Briggs and Stratton Pressure Washer Not Working
Why is my Briggs and Stratton pressure washer not working?
There are a number of reasons why your Briggs and Stratton pressure washer may not be working. Here are some of the most common:
The engine is not getting enough fuel: This could be caused by a number of things, such as a clogged fuel filter, a faulty fuel pump, or a bad spark plug.
The engine is not getting enough air: This could be caused by a clogged air filter, a dirty carburetor, or a bad fuel injector.
The engine is overheating: This could be caused by a number of things, such as a dirty radiator, a faulty thermostat, or a bad water pump.
The pressure washer is not generating enough pressure: This could be caused by a number of things, such as a clogged nozzle, a faulty pump, or a bad hose.
The pressure washer is leaking: This could be caused by a number of things, such as a faulty seal, a cracked hose, or a loose connection.
How do I fix my Briggs and Stratton pressure washer?
To fix your Briggs and Stratton pressure washer, you will need to first identify the problem. Once you have identified the problem, you can then follow the steps below to fix it:
If the engine is not getting enough fuel:
Check the fuel filter for clogs.
Replace the fuel pump if it is faulty.
Clean or replace the spark plug.
If the engine is not getting enough air:
Clean the air filter.
Clean the carburetor.
Replace the fuel injector if it is bad.
If the engine is overheating:
Clean the radiator.
Replace the thermostat if it is faulty.
Replace the water pump if it is bad.
If the pressure washer is not generating enough pressure:
Clean the nozzle.
Replace the pump if it is faulty.
Replace the hose if it is bad.
If the pressure washer is leaking:
Tighten any loose connections.
Replace any faulty seals.
Replace the hose if it is cracked.
What should I do if I can’t fix my Briggs and Stratton pressure washer myself?
If you can’t fix your Briggs and Stratton pressure washer yourself, you can take it to a qualified repair shop. They will be able to diagnose the problem and fix it for you.
How can I prevent my Briggs and Stratton pressure washer from breaking down?
There are a few things you can do to prevent your Briggs and Stratton pressure washer from breaking down:
Follow the manufacturer’s instructions for use and maintenance: This includes things like changing the oil and filter regularly, cleaning the air filter, and storing the pressure washer properly.
Use the pressure washer for its intended purpose: Don’t use it to clean things that are too delicate or that could be damaged by the pressure.
Don’t overload the pressure washer: Only use the pressure washer on surfaces that are strong enough to withstand the pressure.
Store the pressure washer properly: When you’re not using the pressure washer, store it in a cool, dry place.
By following these tips, you can help to prevent your Briggs and Stratton pressure washer from breaking down.