5 Surprising Reasons Your Bushwacker 22-Inch Electric Hedge Trimmer Won’t Start

No power

The trimmer’s battery is dead or not properly connected.
The trimmer’s power cord is damaged or not plugged in.
The trimmer’s switch is turned off.

Engine won’t start

The trimmer’s spark plug is dirty or damaged.
The trimmer’s air filter is dirty or clogged.
The trimmer’s carburetor is dirty or out of adjustment.
The trimmer’s fuel tank is empty or has old or bad fuel.

Trimmer won’t stay running

The trimmer’s engine is overheating.
The trimmer’s carburetor is flooded.
The trimmer’s spark plug is fouled.
The trimmer’s air filter is dirty or clogged.

Bushwacker 22 Inch Electric Hedge Trimmer Won’T Start

1. The Cord Is Not Plugged In

This is the most common reason why a hedge trimmer won’t start. Make sure that the power cord is plugged into an outlet and that the outlet is turned on.

2. The Switch Is Off

Check to make sure that the switch on the hedge trimmer is turned on.

3. The Battery Is Dead

If your hedge trimmer is battery-powered, make sure that the battery is charged.

4. The Spark Plug Is Bad

If your hedge trimmer is gas-powered, check the spark plug to make sure that it is in good condition and that the electrodes are clean.

5. The Carburetor Is Clogged

If your hedge trimmer is gas-powered, the carburetor may be clogged. This can prevent the engine from getting enough fuel to start.

How to Troubleshoot And Fix: Bushwacker 22 Inch Electric Hedge Trimmer Won’t Start

Check the Power Source

Firstly
ensure that the hedge trimmer is properly connected to a power source. Verify that the power cord is securely plugged into a functional electrical outlet. If the power source is confirmed to be working
move on to the next step.

Inspect the Power Cord

Examine the power cord for any signs of damage such as cuts
fraying
or exposed wires. If any damage is detected
refrain from using the trimmer and replace the power cord immediately to prevent electrical hazards.

Assess the Extension Cord

If an extension cord is being used
check its condition as well. Ensure that the extension cord is rated for outdoor use and is free from damage. Using a damaged extension cord can lead to power supply issues.

Check the On/Off Switch

Inspect the on/off switch for any visible damage or debris. Toggle the switch on and off several times to ensure that it is functioning properly. A faulty on/off switch can prevent the hedge trimmer from starting.

Examine the Blades

Carefully examine the cutting blades for any obstructions
such as twigs
leaves
or other debris. Clear any blockages to ensure that the blades can move freely. Blocked blades can cause the trimmer to malfunction.

Inspect the Motor

Open the motor housing to inspect the motor for any signs of damage or overheating. If the motor appears damaged or emits a burning smell
it may need to be replaced by a professional technician.

Check the Battery (If Applicable)

If the hedge trimmer is battery-operated
ensure that the battery is fully charged and properly inserted into the trimmer. If the battery is old or damaged
consider replacing it with a new one.

Verify the Safety Features

Some hedge trimmers are equipped with safety features such as a lock-out button or a two-handed start switch. Ensure that these safety features are engaged properly before attempting to start the trimmer.

Seek Professional Assistance

If after performing the above checks
the hedge trimmer still refuses to start
it is advisable to seek assistance from a certified technician or the manufacturer’s authorized service center. Attempting to repair complex electrical issues without the necessary expertise can be hazardous.
By following these troubleshooting steps
you can potentially identify and resolve the issue preventing your Bushwacker 22 inch electric hedge trimmer from starting. Always prioritize safety and exercise caution when dealing with electrical equipment.

Also Read: Challenge Xtreme Hedge Trimmer Stopped Working

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *