Chainsaw Chain Oiler Not Working: [Proven Ways To Fix]

A chainsaw chain oiler that is not working properly can be a major inconvenience for chainsaw owners. It can cause the chain to become hot and sticky, which can lead to damage to the chain and the chainsaw itself. It can also be dangerous, as a dull or damaged chain is more likely to kickback.

If your chainsaw chain oiler is not working, it is important to troubleshoot the problem and resolve it as quickly as possible. This guide will help you do just that. We will walk you through the steps of diagnosing the problem and finding a solution. By the end of this guide, you will be able to get your chainsaw chain oiler working properly again.

Most Common Reasons Why Chainsaw Chain Oiler Not Working

No Oil in the Tank

The most common reason for a chainsaw chain oiler not working is that there is no oil in the tank. Make sure the tank is full and that the oil level is between the full and add marks.

Clogged Oil Line

Another common cause of a chainsaw chain oiler not working is a clogged oil line. The oil line can become clogged with sawdust, dirt, or other debris. To clean the oil line, remove the oiler cover and use a small brush to clean out the inside of the line.

Blocked Oil Port

The oil port on the chainsaw chain can become blocked with sawdust or dirt, preventing oil from reaching the chain. To clean the oil port, remove the bar cover and use a small brush to clean out the port.

Defective Oiler

In rare cases, the chainsaw chain oiler itself may be defective. If you have checked all of the other possible causes and the chain oiler is still not working, it may need to be replaced.

How to Troubleshoot: Chainsaw Chain Oiler Not Working

Your chainsaw’s chain oiler is an essential part of keeping your saw running smoothly. It helps to lubricate the chain, which prevents it from overheating and wearing down. If your chain oiler isn’t working properly, it can lead to a number of problems, including:

A dull chain
A damaged chain
A difficult-to-start saw
A saw that overheats

In this article, we’ll walk you through the steps of troubleshooting a chainsaw chain oiler that’s not working. We’ll cover everything from checking the oil level to cleaning the oiler. By the end of this article, you’ll be able to identify and fix the problem with your chain oiler, so you can get back to cutting wood.

Step 1: Check the oil level

The first step in troubleshooting a chainsaw chain oiler is to check the oil level. To do this, follow these steps:

1. Turn off the saw and let it cool down.
2. Locate the oil tank. It’s usually located on the side of the saw.
3. Remove the oil cap and check the level of oil. The oil level should be between the full and add marks on the oil tank.

If the oil level is low, add more oil to the tank. Make sure to use the type of oil that’s recommended by the saw manufacturer.

Step 2: Check the oil line

The next step is to check the oil line. The oil line is a small hose that connects the oil tank to the chain. To check the oil line, follow these steps:

1. Remove the oil cap from the oil tank.
2. Locate the oil line. It’s usually a small hose that runs from the oil tank to the chain.
3. Inspect the oil line for damage. Look for cracks, kinks, or leaks.

If the oil line is damaged, it will need to be replaced. You can find replacement oil lines at most hardware stores.

Step 3: Clean the oiler

If the oil level and oil line are both good, the next step is to clean the oiler. The oiler is a small hole that’s located on the bar. It’s responsible for spraying oil onto the chain. To clean the oiler, follow these steps:

1. Turn off the saw and let it cool down.
2. Locate the oiler. It’s a small hole that’s located on the bar.
3. Use a small brush to clean the oiler. Be careful not to damage the oiler.

Step 4: Check the oil pump

The oil pump is responsible for pumping oil from the oil tank to the chain. To check the oil pump, follow these steps:

1. Turn off the saw and let it cool down.
2. Locate the oil pump. It’s usually a small, cylindrical-shaped object that’s located near the oil tank.
3. Use a small screwdriver to turn the oil pump. The oil pump should turn smoothly. If the oil pump is difficult to turn, it may be damaged and will need to be replaced.

Step 5: Replace the oil filter

Some chainsaws have an oil filter. The oil filter is responsible for filtering out dirt and debris from the oil. To replace the oil filter, follow these steps:

1. Turn off the saw and let it cool down.
2. Locate the oil filter. It’s usually a small, cylindrical-shaped object that’s located near the oil tank.
3. Remove the old oil filter.
4. Install the new oil filter.

Conclusion

By following these steps, you can troubleshoot a chainsaw chain oiler that’s not working. If you’re unable to fix the problem yourself, you can take your saw to a qualified chainsaw repair shop.

FAQs: Chainsaw Chain Oiler Not Working

Why is my chainsaw chain oiler not working?

There are a few possible reasons why your chainsaw chain oiler may not be working.

The oiler may be clogged. If the oiler is clogged, it will not be able to properly dispense oil onto the chain. To clean the oiler, remove the oiler cap and use a small brush to clean out any debris.
The oiler may be empty. If the oiler is empty, it will not be able to dispense any oil. To check the oil level, remove the oiler cap and look inside. If the oil level is low, add more oil to the oiler.
The oiler may be turned off. If the oiler is turned off, it will not be able to dispense any oil. To turn on the oiler, locate the oiler switch and turn it to the On position.
The oiler may be malfunctioning. If the oiler is malfunctioning, it may need to be replaced. To determine if the oiler is malfunctioning, try replacing the oiler with a new one. If the new oiler works properly, then the old oiler was malfunctioning.

How do I fix a clogged chainsaw chain oiler?

To fix a clogged chainsaw chain oiler, you will need to clean out the oiler. To do this, follow these steps:

1. Remove the oiler cap.
2. Use a small brush to clean out any debris from the oiler.
3. Reattach the oiler cap.

How do I check the oil level in my chainsaw chain oiler?

To check the oil level in your chainsaw chain oiler, you will need to remove the oiler cap. Once the cap is removed, you will be able to see the oil level inside the oiler. If the oil level is low, add more oil to the oiler.

How do I turn on the chainsaw chain oiler?

To turn on the chainsaw chain oiler, you will need to locate the oiler switch. The oiler switch is typically located on the side of the chainsaw. Once you have located the oiler switch, turn it to the On position.

How do I replace a chainsaw chain oiler?

To replace a chainsaw chain oiler, you will need to follow these steps:

1. Remove the old oiler.
2. Inspect the oiler housing for any damage. If the oiler housing is damaged, it will need to be replaced.
3. Install the new oiler.
4. Add oil to the oiler.
5. Turn on the oiler.

Also Read: Chainsaw Grease Gun Not Working

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *