Chainsaw Rust Not Working: [You Should Try This]

As a chainsaw owner, there’s nothing more frustrating than when your saw suddenly stops working. Whether it’s not starting, not cutting through wood, or making strange noises, a broken chainsaw can be a major inconvenience. Not only can it be dangerous to use a chainsaw that’s not working properly, but it can also be costly to have repaired.

If your chainsaw is not working, there are a few things you can check to try to troubleshoot the problem. In this guide, we’ll walk you through the common causes of chainsaw problems and how to fix them. We’ll also provide tips on how to prevent future problems.

By following these simple steps, you can quickly diagnose and resolve the issue, so you can get back to using your chainsaw in no time.

Most Common Reasons Why Chainsaw Rust Not Working

Chainsaw Chain Too Tight

If the chainsaw chain is too tight, it will not be able to move freely and will eventually cause the saw to stall. To check if the chain is too tight, try to move it up and down with your hand. If it is difficult to move, loosen the chain tensioner until it moves more freely.

Chainsaw Chain Too Loose

If the chainsaw chain is too loose, it will be more likely to come off the guide bar. To check if the chain is too loose, try to pull it up with your hand. If it comes off easily, tighten the chain tensioner until it is snug against the guide bar.

Chainsaw Chain Oiler Not Working

The chainsaw chain oiler is responsible for lubricating the chain and keeping it from overheating. If the oiler is not working properly, the chain will become dry and will eventually wear out. To check if the oiler is working, look for oil dripping from the chain. If you do not see any oil, try cleaning the oiler and replacing the oil filter.

Chainsaw Carburetor Problems

The carburetor is responsible for mixing the fuel and air in the correct proportions. If the carburetor is not adjusted properly, the chainsaw will not run properly. To check if the carburetor is the problem, try cleaning it and adjusting the carburetor screws.

Chainsaw Spark Plug Problems

The spark plug is responsible for igniting the fuel in the chainsaw engine. If the spark plug is faulty, the chainsaw will not start or will run poorly. To check if the spark plug is the problem, try replacing it with a new one.

Chainsaw Air Filter Problems

The air filter is responsible for filtering the air that enters the chainsaw engine. If the air filter is dirty, it will restrict the flow of air and cause the chainsaw to run poorly. To check if the air filter is the problem, try cleaning it or replacing it with a new one.

Chainsaw Bar Oil Problems

The bar oil is responsible for lubricating the guide bar and chain. If the bar oil is low, the guide bar and chain will become dry and will eventually wear out. To check if the bar oil is the problem, try adding more bar oil to the chainsaw.

How to Troubleshoot: Chainsaw Rust Not Working

Chainsaws are essential tools for many homeowners and professionals, but they can be a pain when they rust and stop working. Rust is a common problem with chainsaws, especially if they are not properly maintained. However, there are a few things you can do to troubleshoot a chainsaw that is rusted and not working.

Steps to Troubleshoot a Rusted Chainsaw

1. Inspect the chainsaw for rust. The first step is to inspect the chainsaw for rust. Look for any signs of rust on the chain, bar, or engine. If you see any rust, you will need to clean it off before you can continue troubleshooting.
2. Clean the chainsaw. Once you have inspected the chainsaw for rust, you will need to clean it. This will help to remove any dirt or debris that may be causing the chainsaw to malfunction. You can clean the chainsaw with a degreaser or a mild soap and water solution.
3. Lubricate the chainsaw. Once the chainsaw is clean, you will need to lubricate it. This will help to prevent further rust and keep the chainsaw running smoothly. You can use a chainsaw oil or a light machine oil.
4. Adjust the chain tension. The chain tension is important for the performance of your chainsaw. If the chain is too tight, it will be difficult to operate and may damage the engine. If the chain is too loose, it will be more likely to come off the bar. You can adjust the chain tension by turning the tensioner screw.
5. Replace the chain. If the chain is badly damaged or worn out, you will need to replace it. A new chain will help to improve the performance of your chainsaw and make it easier to operate.
6. Inspect the engine. If the chainsaw is still not working after you have cleaned it, lubricated it, and adjusted the chain tension, you will need to inspect the engine. Look for any signs of damage or wear. If you find any damage, you will need to have the engine repaired or replaced.

Preventing Rust on Your Chainsaw

The best way to prevent rust on your chainsaw is to properly maintain it. This includes cleaning it after each use, lubricating it regularly, and storing it in a dry place. You can also use a rust-resistant coating on your chainsaw to help protect it from the elements.

By following these tips, you can help to keep your chainsaw rust-free and working properly.

FAQs About Chainsaw Rust

Why is my chainsaw rusting?

There are a few reasons why your chainsaw might be rusting. The most common cause is exposure to water. When water gets on the chainsaw, it can create a perfect environment for rust to form. Other causes of rust include:

Dirt and grime: Dirt and grime can trap moisture on the chainsaw, which can lead to rust.
Chemicals: Chemicals like gasoline and oil can also cause rust if they are not properly cleaned off the chainsaw.
Improper storage: If your chainsaw is not stored properly, it can be exposed to the elements, which can cause rust.

How can I prevent my chainsaw from rusting?

There are a few things you can do to prevent your chainsaw from rusting:

Keep it clean: The best way to prevent rust is to keep your chainsaw clean. Make sure to wipe it down after each use and clean it more thoroughly every few weeks.
Store it properly: When you’re not using your chainsaw, store it in a dry, well-ventilated area. Avoid storing it in direct sunlight or near moisture.
Use a rust-resistant coating: You can also apply a rust-resistant coating to your chainsaw to help protect it from the elements.

How do I remove rust from my chainsaw?

If your chainsaw has already started to rust, you can remove the rust using a few different methods:

Chemical rust remover: You can use a chemical rust remover to remove rust from your chainsaw. Be sure to follow the directions on the product label carefully.
Mechanical rust removal: You can also remove rust from your chainsaw using a wire brush or sandpaper. Be careful not to damage the metal.
Electrolytic rust removal: Electrolytic rust removal is a process that uses electricity to remove rust from metal. This is a more time-consuming process, but it is also more effective than chemical or mechanical rust removal.

How can I keep my chainsaw running smoothly?

In addition to preventing rust, there are a few other things you can do to keep your chainsaw running smoothly:

Change the oil regularly: The oil in your chainsaw helps to lubricate the moving parts and prevent wear and tear. Make sure to change the oil according to the manufacturer’s recommendations.
Sharpen the chain regularly: A dull chain can be dangerous and difficult to use. Make sure to sharpen the chain regularly to keep it cutting efficiently.
Maintain the air filter: The air filter in your chainsaw helps to keep dirt and debris out of the engine. Make sure to clean or replace the air filter regularly to keep your chainsaw running smoothly.

What should I do if my chainsaw is still not working?

If you have tried all of the above tips and your chainsaw is still not working, it is best to take it to a qualified technician for repairs. A technician can diagnose the problem and make the necessary repairs to get your chainsaw back up and running.

Also Read: Chainsaw Stop Swith Not Working