Why Your Chainsaw Won’t Draw Gas and How to Fix It!

Your chainsaw is a powerful tool that can be used for a variety of tasks, from cutting down trees to clearing brush. But what happens when your This can be a frustrating problem, but it’s usually easy to fix.

In this blog post, we’ll discuss the most common reasons why a , as well as how to troubleshoot and fix the problem. We’ll also provide some tips on how to prevent this problem from happening in the future.

Chainsaw Won’T Draw Gas

Why Your Chainsaw Won’t Draw Gas and How to Fix It

There are a few reasons why your chainsaw might not be drawing gas.

The fuel tank is empty:
Make sure the fuel tank is full of fresh gas.

The fuel line is clogged:
Clean the fuel line with a small brush or compressed air.

The fuel filter is clogged:
Replace the fuel filter.

The carburetor is dirty or out of adjustment:
Clean or adjust the carburetor.

The spark plug is fouled:
Clean or replace the spark plug.

If you have checked all of these things and your chainsaw still won’t draw gas, you may need to take it to a professional for repair.

Chainsaw Won’t Draw Gas

Symptoms

The chainsaw won’t start or runs poorly.
The chainsaw makes a sputtering sound when you try to start it.
The chainsaw’s engine dies after running for a short time.
Gas leaks from the chainsaw’s carburetor.

Causes

There are a number of possible causes for a chainsaw not drawing gas, including:

A clogged fuel filter:
The fuel filter prevents dirt and debris from entering the carburetor. If the filter is clogged, it can restrict the flow of gas to the carburetor, causing the chainsaw to run poorly or not start at all.

A dirty carburetor:
The carburetor is responsible for mixing gas and air in the correct proportions. If the carburetor is dirty, it can cause the chainsaw to run poorly or not start at all.

A faulty fuel valve:
The fuel valve controls the flow of gas to the carburetor. If the valve is faulty, it can prevent gas from flowing to the carburetor, causing the chainsaw to run poorly or not start at all.

A faulty spark plug:
The spark plug ignites the gas-air mixture in the cylinder, causing the chainsaw to run. If the spark plug is faulty, it can prevent the chainsaw from starting or running properly.

Solutions

To fix a chainsaw that won’t draw gas, you will need to identify the cause of the problem and take steps to correct it.

If the fuel filter is clogged, you can clean it by removing it from the chainsaw and soaking it in a bowl of warm, soapy water. Once the filter is clean, rinse it thoroughly and dry it before reinstalling it in the chainsaw.

If the carburetor is dirty, you can clean it by removing it from the chainsaw and disassembling it. Use a carburetor cleaner to clean the carburetor’s jets and passages. Once the carburetor is clean, reassemble it and reinstall it in the chainsaw.

If the fuel valve is faulty, you will need to replace it. To do this, you will need to remove the fuel valve from the chainsaw and install a new one.

If the spark plug is faulty, you will need to replace it. To do this, you will need to remove the spark plug from the chainsaw and install a new one.

Once you have corrected the problem, the chainsaw should start and run properly.

Prevention

You can prevent a chainsaw from not drawing gas by following these tips:

Keep the fuel filter clean:
Replace the fuel filter regularly, or whenever it becomes clogged.

Keep the carburetor clean:
Clean the carburetor regularly, or whenever it becomes dirty.

Inspect the fuel valve regularly:
Inspect the fuel valve for leaks or damage. Replace the fuel valve if necessary.

Inspect the spark plug regularly:
Inspect the spark plug for damage or wear. Replace the spark plug if necessary.

By following these tips, you can help prevent a chainsaw from not drawing gas.

Also Read: Chainsaw Won’T Pump Gas Into The Bulb

FAQs: Chainsaw Won’t Draw Gas

Why won’t my chainsaw draw gas?

There are a few possible reasons why your chainsaw won’t draw gas. Here are the most common ones:

The fuel line is clogged: This is the most common cause of a chainsaw not drawing gas. To fix this, you’ll need to clean the fuel line.

The fuel filter is clogged: The fuel filter is located in the fuel line, and it can become clogged with dirt and debris. To fix this, you’ll need to replace the fuel filter.

The carburetor is dirty: The carburetor is responsible for mixing the fuel and air in the correct proportions. If the carburetor is dirty, it can cause the chainsaw to not draw gas. To fix this, you’ll need to clean the carburetor.

The spark plug is fouled: The spark plug is responsible for igniting the fuel/air mixture in the cylinder. If the spark plug is fouled, it can cause the chainsaw to not start. To fix this, you’ll need to clean or replace the spark plug.

The engine is flooded: If the engine is flooded, it can prevent the chainsaw from drawing gas. To fix this, you’ll need to drain the excess fuel from the carburetor.

How do I fix a chainsaw that won’t draw gas?

To fix a chainsaw that won’t draw gas, you’ll need to identify the cause of the problem and then take the appropriate steps to fix it. Here are the steps to fix a chainsaw that won’t draw gas:

1. Check the fuel line: Make sure that the fuel line is clear and free of kinks or obstructions. If the fuel line is clogged, you’ll need to clean it.
2. Check the fuel filter: Remove the fuel filter and inspect it for dirt or debris. If the fuel filter is clogged, you’ll need to replace it.
3. Clean the carburetor: If the carburetor is dirty, it can cause the chainsaw to not draw gas. To clean the carburetor, you’ll need to remove it from the chainsaw and follow the manufacturer’s instructions for cleaning it.
4. Check the spark plug: Remove the spark plug and inspect it for fouling. If the spark plug is fouled, you’ll need to clean or replace it.
5. Drain the excess fuel from the carburetor: If the engine is flooded, it can prevent the chainsaw from drawing gas. To drain the excess fuel from the carburetor, you’ll need to remove the carburetor bowl and drain the fuel.

What should I do if my chainsaw still won’t draw gas after I’ve tried to fix it?

If your chainsaw still won’t draw gas after you’ve tried to fix it, you should take it to a qualified chainsaw repair technician. The technician will be able to diagnose the problem and fix it properly.

How can I prevent my chainsaw from not drawing gas?

To prevent your chainsaw from not drawing gas, you can take the following steps:

Keep the fuel line and fuel filter clean: Make sure to clean the fuel line and fuel filter regularly to prevent them from becoming clogged.

Store your chainsaw properly: When you’re not using your chainsaw, store it in a cool, dry place. This will help to prevent the carburetor from becoming gummed up.

Use the correct type of fuel: Make sure to use the correct type of fuel for your chainsaw. Using the wrong type of fuel can damage the carburetor and cause the chainsaw to not draw gas.

Don’t overfill the fuel tank: Overfilling the fuel tank can cause the fuel to overflow and leak into the carburetor. This can damage the carburetor and cause the chainsaw to not draw gas.

Additional resources

[How to Fix a Chainsaw That Won’t Draw Gas](https://www.thesprucecrafts.com/how-to-fix-a-chainsaw-that-wont-draw-gas-4171787)
[Chainsaw Won’t Draw Gas: Causes and Solutions](https://www.hunker.com/12430144/chainsaw-wont-draw-gas-causes-and-solutions)
[How to Clean a Chainsaw Carburetor](https://www.tractorsupply.com/how-to/clean-a-chainsaw-carburetor)

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *