Why Your Chainsaw Won’t Start After Running Out of Gas

Running out of gas is a common problem for chainsaws, but it doesn’t have to be a major inconvenience. In this blog post, we’ll show you how to troubleshoot a chainsaw that won’t start after running out of gas. We’ll also provide some tips on how to prevent this problem from happening in the future.

So if your chainsaw has stopped working, don’t despair! Just follow these steps and you’ll be back up and running in no time.

Chainsaw Won’T Start After Running Out Of Gas

Your chainsaw won’t start after running out of gas because the carburetor needs to be primed. This is done by turning the choke on and pulling the starter cord until fuel flows out of the carburetor overflow. Once the fuel starts flowing, turn the choke off and try starting the chainsaw again.

Chainsaw Won’t Start After Running Out of Gas

What to Do

If your chainsaw won’t start after running out of gas, there are a few things you can check and try.

1. Check the fuel tank:
Make sure that the fuel tank is full of fresh gas. If the tank is empty, fill it up and try starting the chainsaw again.

2. Check the fuel filter:
The fuel filter can become clogged with dirt and debris, which can prevent the chainsaw from starting. Remove the fuel filter and clean it with a clean rag. If the filter is damaged, replace it with a new one.3. Check the spark plug:
The spark plug can become fouled with carbon deposits, which can prevent the spark from jumping across the gap. Remove the spark plug and clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.

4. Check the air filter:
The air filter can become clogged with dirt and debris, which can restrict the flow of air to the carburetor. Remove the air filter and clean it with a clean rag. If the filter is damaged, replace it with a new one.

5. Adjust the carburetor:
The carburetor can become adjusted incorrectly, which can prevent the chainsaw from starting. If you are not familiar with adjusting the carburetor, take your chainsaw to a qualified service technician.

Preventative Maintenance

To prevent your chainsaw from not starting after running out of gas, you can perform the following preventative maintenance:

Keep the fuel tank full of fresh gas.
Clean the fuel filter regularly.
Replace the spark plug regularly.
Clean the air filter regularly.
Adjust the carburetor regularly.

By following these tips, you can help keep your chainsaw running smoothly and prevent it from not starting after running out of gas.

Also Read: Gas Chainsaw Won’T Start

FAQs: Chainsaw Won’t Start After Running Out of Gas

Why won’t my chainsaw start after running out of gas?

There are a few possible reasons why your chainsaw won’t start after running out of gas.

The carburetor is flooded: When you run out of gas, the carburetor can become flooded with fuel. This can prevent the chainsaw from starting because the fuel can’t reach the engine. To fix this, you can try to clear the carburetor by following the instructions in your chainsaw’s owner’s manual.

The spark plug is fouled: The spark plug can also become fouled when you run out of gas. This can prevent the spark plug from firing, which is necessary to start the chainsaw. To fix this, you can try to clean the spark plug by following the instructions in your chainsaw’s owner’s manual.

The air filter is dirty: The air filter can also become dirty when you run out of gas. This can prevent the engine from getting enough air, which can also prevent it from starting. To fix this, you can try to clean the air filter by following the instructions in your chainsaw’s owner’s manual.

The engine is seized: If your chainsaw has been sitting for a long time without being used, the engine may have seized. This means that the pistons have stuck to the cylinder walls and the engine can’t turn over. To fix this, you may need to have the engine serviced by a professional.

What should I do if my chainsaw won’t start after running out of gas?

If your chainsaw won’t start after running out of gas, you can try the following steps:

1. Check the carburetor to make sure it’s not flooded.
2. Check the spark plug to make sure it’s not fouled.
3. Check the air filter to make sure it’s not dirty.
4. Try starting the chainsaw with a fresh tank of gas.
5. If the chainsaw still won’t start, you may need to have it serviced by a professional.

How can I prevent my chainsaw from not starting after running out of gas?

There are a few things you can do to prevent your chainsaw from not starting after running out of gas.

Always make sure the carburetor is clean: A dirty carburetor can prevent the chainsaw from starting properly.

Always make sure the spark plug is clean and properly gapped: A fouled spark plug can prevent the chainsaw from starting.

Always make sure the air filter is clean: A dirty air filter can prevent the engine from getting enough air, which can also prevent it from starting.

Don’t let your chainsaw sit for long periods of time without being used: If your chainsaw sits for a long time, the engine may seize.

What are the signs that my chainsaw is about to run out of gas?

There are a few signs that your chainsaw is about to run out of gas.

The chainsaw will start to lose power.
The chainsaw will start to sputter.
The chainsaw will start to stall.

If you see any of these signs, it’s time to refuel your chainsaw.

What should I do if my chainsaw runs out of gas while I’m using it?

If your chainsaw runs out of gas while you’re using it, you can try the following steps:

1. Stop the chainsaw and turn off the engine.
2. Remove the spark plug.
3. Pour a small amount of gas into the carburetor.
4. Reinstall the spark plug.
5. Start the chainsaw and let it run for a few minutes to clear the carburetor.

If the chainsaw still won’t start, you may need to have it serviced by a professional.