Chemical Injector For Pressure Washer Not Working [How To Fix It]

Your pressure washer’s chemical injector is a vital part of the machine, and when it isn’t working properly, it can be a major inconvenience. Not only can it make it difficult to clean your surfaces effectively, but it can also be dangerous if you accidentally spray chemicals on yourself or others.

In this guide, I’ll walk you through the steps to troubleshoot a chemical injector that isn’t working. I’ll cover common causes of the problem, as well as how to fix them. By the end of this guide, you’ll be able to get your pressure washer back up and running in no time.

Reasons Why Chemical Injector For Pressure Washer Not Working

Reasons Why Chemical Injector For Pressure Washer Not Working

Blocked chemical injector nozzle:
The chemical injector nozzle can become blocked with dirt or debris, preventing the chemical from being injected into the water stream. To clear the nozzle, remove it from the pressure washer and clean it with a small brush.

Incorrect chemical injector settings:
The chemical injector may not be working properly if the settings are incorrect. Check the owner’s manual for the correct settings for your pressure washer.

Faulty chemical injector:
If the chemical injector is faulty, it will need to be replaced.

Low water pressure:
The chemical injector will not work properly if the water pressure is too low. Check the water pressure at the pressure washer and make sure it is within the manufacturer’s specifications.

Blocked water supply line:
The water supply line to the chemical injector may be blocked with dirt or debris, preventing the water from reaching the injector. To clear the line, remove the hose from the injector and clean it with a small brush.

Incorrect chemical type:
The chemical injector is designed for a specific type of chemical. Using the wrong type of chemical can damage the injector. Make sure you are using the correct chemical for your pressure washer.

How to Troubleshoot: Chemical Injector for Pressure Washer Not Working

Symptoms of a Chemical Injector Not Working

There are a few signs that may indicate that your chemical injector is not working properly. These include:

The pressure washer is not producing any chemical solution.
The chemical solution is not being dispensed evenly.
The chemical solution is being dispensed too quickly or too slowly.
The chemical solution is leaking from the injector.

Troubleshooting Steps

If you suspect that your chemical injector is not working properly, you can try the following troubleshooting steps:

1. Check the chemical solution reservoir:
Make sure that the reservoir is full of chemical solution and that the solution is flowing freely. If the reservoir is empty or the solution is not flowing, you will need to refill the reservoir or replace the chemical solution.

2. Check the chemical injector hose:
Make sure that the hose is not kinked or blocked. If the hose is kinked or blocked, you will need to straighten it out or clear the blockage.3. Check the chemical injector nozzle:
Make sure that the nozzle is not clogged. If the nozzle is clogged, you will need to clean it or replace it.

4. Check the chemical injector pump:
Make sure that the pump is working properly. You can do this by turning on the pressure washer and listening for the pump to run. If the pump is not running, you will need to repair or replace it.

Preventative Maintenance

You can help prevent problems with your chemical injector by following these tips:

Keep the chemical solution reservoir full and the solution flowing freely.
Check the chemical injector hose for kinks or blockages regularly and fix them as needed.
Clean the chemical injector nozzle regularly to prevent it from clogging.
Have the chemical injector pump checked and serviced regularly.

By following these tips, you can help keep your chemical injector working properly and avoid costly repairs.

Also Read: Clean And Carry Craftsman Pressure Washer Not Working

FAQs: Chemical Injector for Pressure Washer Not Working

Why is my chemical injector not working?

There are a few possible reasons why your chemical injector might not be working. Here are some of the most common causes:

The injector is clogged: This is the most common cause of a chemical injector not working. Clogs can occur when debris or sediment builds up in the injector, preventing the chemical from flowing through. To fix this problem, you will need to clean the injector.

The injector is not getting enough pressure: If the injector is not getting enough pressure, it will not be able to properly inject the chemical into the water stream. This can be caused by a number of factors, such as a clogged filter, a faulty pump, or a kinked hose. To fix this problem, you will need to identify the source of the low pressure and correct it.

The injector is not properly installed: If the injector is not properly installed, it may not be able to properly inject the chemical into the water stream. This can be caused by a number of factors, such as the injector being installed in the wrong location, the injector being installed incorrectly, or the injector being damaged. To fix this problem, you will need to properly install the injector.

How do I clean a chemical injector?

To clean a chemical injector, you will need the following materials:

A bucket of water
A cleaning solution (such as a degreaser or a vinegar solution)
A toothbrush or other small brush
A pair of gloves

1. Turn off the power to the pressure washer and disconnect the chemical injector from the pump.
2. Fill the bucket with water and add the cleaning solution.
3. Dip the toothbrush or brush into the cleaning solution and scrub the inside of the injector.
4. Rinse the injector thoroughly with water.
5. Reattach the injector to the pump and turn on the power to the pressure washer.

How do I check the pressure of my chemical injector?

To check the pressure of your chemical injector, you will need the following materials:

A pressure gauge
A hose clamp

1. Disconnect the chemical injector from the pump.
2. Attach the pressure gauge to the outlet of the injector.
3. Turn on the power to the pressure washer and allow the pressure to build up.
4. Read the pressure gauge to see the current pressure of the injector.

What is the correct location for a chemical injector?

The correct location for a chemical injector will vary depending on the specific model of pressure washer. However, in general, chemical injectors are installed between the pump and the spray gun. This allows the chemical to be injected into the water stream at the correct point.

What are the signs of a faulty chemical injector?

There are a few signs that can indicate that your chemical injector is faulty. These include:

The chemical is not being injected into the water stream.
The chemical is being injected into the water stream at the wrong time.
The chemical is being injected into the water stream at the wrong rate.
The chemical is being injected into the water stream in the wrong location.

If you notice any of these signs, it is important to have your chemical injector repaired or replaced as soon as possible.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *