Clean And Carry Craftsman Pressure Washer Not Working [Fix It For Good]

Your Clean and Carry Craftsman pressure washer is not working, and you’re frustrated. You need to clean the deck, but you can’t get the pressure washer to start. You’re not alone. This is a common problem, and there are a few things you can check to try to fix it.

In this guide, I’ll walk you through the steps to troubleshoot a Craftsman pressure washer that’s not working. I’ll start with the basics and then move on to more advanced troubleshooting. By the end of this guide, you’ll have your pressure washer up and running again, so you can get back to cleaning.

Reasons Why Clean And Carry Craftsman Pressure Washer Not Working

No Power

The power cord is not plugged in or is not plugged in all the way:

The pressure washer’s circuit breaker is tripped:

The pressure washer’s thermal overload protector has tripped:

The pressure washer’s pump is not working:

No Water

The water supply hose is not connected to the pressure washer or is not connected tightly:

The water supply pressure is too low:

The water filter is clogged:

The pump is not working:

Low Pressure

The water supply pressure is too low:

The water filter is clogged:

The pump is not working properly:

The pressure washer’s nozzle is clogged:

High Pressure

The pressure washer’s nozzle is too small:

The pressure washer’s pump is not working properly:

The pressure washer’s relief valve is stuck open:

Other Problems

The pressure washer is leaking:

The pressure washer is making strange noises:

The pressure washer is not starting:

Troubleshooting Tips

If the pressure washer is not working, first check to make sure that it is plugged in and turned on:

If the pressure washer is still not working, check the circuit breaker and the thermal overload protector:

If the pressure washer is still not working, check the water supply hose and the water filter:

If the pressure washer is still not working, check the pump:

If you are unable to troubleshoot the problem yourself, take the pressure washer to a qualified technician for repairs:

How to Troubleshoot: Clean and Carry Craftsman Pressure Washer Not Working

Your Clean and Carry Craftsman pressure washer is a powerful tool that can make quick work of cleaning your home, car, or yard. However, like any machine, it can sometimes malfunction. If your pressure washer is not working, there are a few things you can check to troubleshoot the problem.

Step 1: Check the power

The first thing you should do is check to make sure that the pressure washer is plugged in and turned on. If it is not plugged in, plug it in and turn it on. If it is plugged in and turned on, but the motor is not running, check the circuit breaker to make sure that it is not tripped.

Step 2: Check the water supply

If the power is on and the motor is running, but you are not getting any water out of the pressure washer, check the water supply. Make sure that the hose is connected to the pressure washer and to the water source. Also, make sure that the water valve is turned on.

Step 3: Check the pressure

If you are getting water out of the pressure washer, but it is not very powerful, check the pressure. The pressure washer should have a pressure gauge that tells you how much pressure the water is being sprayed at. If the pressure is too low, you may need to adjust the pressure regulator.

Step 4: Check the pump

If you have checked all of the other possibilities and your pressure washer is still not working, you may need to check the pump. The pump is the heart of the pressure washer, and if it is not working properly, the pressure washer will not work. To check the pump, you will need to open the housing and inspect the pump. If the pump is damaged, you will need to replace it.

Conclusion

These are just a few of the things you can check to troubleshoot a Clean and Carry Craftsman pressure washer that is not working. If you are unable to fix the problem yourself, you can always take the pressure washer to a qualified technician.

Also Read: Craftsman Electric Pressure Washer Soap Not Working

FAQs: Clean and Carry Craftsman Pressure Washer Not Working

Why is my Clean and Carry Craftsman pressure washer not working?

There are a few possible reasons why your Clean and Carry Craftsman pressure washer might not be working. Here are some of the most common causes:

The water supply is turned off: Make sure that the water supply to your pressure washer is turned on.

The pressure washer is not plugged in: Check to make sure that the pressure washer is plugged into an outlet and that the outlet is turned on.

The pressure washer is not primed: Priming the pressure washer ensures that there is enough water in the pump to create pressure. To prime the pressure washer, follow the instructions in the owner’s manual.

The pressure washer is clogged: The pressure washer nozzle or filter may be clogged, preventing water from flowing through the pump. To clean the nozzle or filter, follow the instructions in the owner’s manual.

The pressure washer is damaged: If the pressure washer is damaged, it may not be able to work properly. If you suspect that the pressure washer is damaged, take it to a qualified technician for repairs.

How do I prime my Clean and Carry Craftsman pressure washer?

To prime your Clean and Carry Craftsman pressure washer, follow these steps:

1. Turn on the water supply to the pressure washer.
2. Turn on the pressure washer and squeeze the trigger on the gun.
3. Hold the trigger down and pump the handle on the pressure washer until water starts to flow out of the nozzle.
4. Release the trigger and let the pressure washer run for a few seconds to clear any air from the pump.

How do I clean the nozzle on my Clean and Carry Craftsman pressure washer?

To clean the nozzle on your Clean and Carry Craftsman pressure washer, follow these steps:

1. Turn off the pressure washer and disconnect the hose from the gun.
2. Remove the nozzle from the gun.
3. Soak the nozzle in a cup of vinegar for 15 minutes.
4. Use a toothbrush to scrub the nozzle clean.
5. Rinse the nozzle thoroughly with water.
6. Reattach the nozzle to the gun.

How do I clean the filter on my Clean and Carry Craftsman pressure washer?

To clean the filter on your Clean and Carry Craftsman pressure washer, follow these steps:

1. Turn off the pressure washer and disconnect the hose from the gun.
2. Remove the filter from the pressure washer.
3. Soak the filter in a cup of warm, soapy water for 15 minutes.
4. Use a toothbrush to scrub the filter clean.
5. Rinse the filter thoroughly with water.
6. Reattach the filter to the pressure washer.

What should I do if my Clean and Carry Craftsman pressure washer is still not working?

If your Clean and Carry Craftsman pressure washer is still not working after you have tried the troubleshooting steps above, you may need to take it to a qualified technician for repairs.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *