Craftsman Chainsaw Automatic Chain Oiler Not Working: [Easy Troubleshooting]

As a chainsaw owner, there’s nothing more frustrating than having your automatic chain oiler stop working. Not only is it a safety hazard, but it can also make it difficult to use your chainsaw properly. If your craftsman chainsaw automatic chain oiler is not working, there are a few things you can check to try to troubleshoot the problem. In this guide, I will walk you through the steps to diagnose and resolve the issue. By the end of this guide, you’ll be able to get your chainsaw back up and running in no time.

Most Common Reasons Why Craftsman Chainsaw Automatic Chain Oiler Not Working

Chainsaw Chain Oiler Not Working

Oiler Hose Clogged

The most common reason for a chainsaw chain oiler not working is a clogged oiler hose. This can be caused by dirt, sawdust, or other debris getting into the hose and preventing the oil from flowing to the chain.
To fix this problem, you will need to clean the oiler hose. You can do this by removing the hose from the chainsaw and using a small brush to clean out any debris.

Oiler Pump Not Working

Another common reason for a chainsaw chain oiler not working is a faulty oiler pump. The oiler pump is responsible for pumping oil from the reservoir to the chain. If the pump is not working properly, it will not be able to deliver oil to the chain.
To fix this problem, you will need to replace the oiler pump. You can do this by removing the old pump and installing a new one.

Oil Level Low

A third common reason for a chainsaw chain oiler not working is a low oil level. If the oil level is too low, the oiler pump will not be able to draw enough oil to lubricate the chain.
To fix this problem, you will need to add oil to the reservoir. You can do this by removing the oil cap and pouring oil into the reservoir until it reaches the fill line.

Oil Filter Clogged

A fourth common reason for a chainsaw chain oiler not working is a clogged oil filter. The oil filter is responsible for filtering out dirt and debris from the oil before it is sent to the chain. If the oil filter is clogged, it will not be able to filter the oil properly and the oil will not be able to reach the chain.
To fix this problem, you will need to clean or replace the oil filter. You can do this by removing the oil filter and cleaning it with a solvent. If the oil filter is damaged, you will need to replace it with a new one.

Chain Tension Too Tight

A fifth common reason for a chainsaw chain oiler not working is a chain that is too tight. When the chain is too tight, it can put pressure on the oiler pump and prevent it from working properly.
To fix this problem, you will need to loosen the chain tension. You can do this by turning the chain tensioner screw clockwise.

Chain Bar Lubrication Holes Clogged

A sixth common reason for a chainsaw chain oiler not working is clogged chain bar lubrication holes. The chain bar lubrication holes are responsible for delivering oil to the chain bar. If the holes are clogged, the oil will not be able to reach the chain bar and the chain will not be properly lubricated.
To fix this problem, you will need to clean the chain bar lubrication holes. You can do this by using a small brush to remove any debris from the holes.

How to Troubleshoot: Craftsman Chainsaw Automatic Chain Oiler Not Working

Symptoms

There are a few different symptoms that may indicate that your Craftsman chainsaw automatic chain oiler is not working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain and sprocket.
The oiler is leaking oil, which can make a mess and also be a fire hazard.
The oiler is making a loud noise, which may indicate that there is a problem with the pump or motor.

Troubleshooting

If you are experiencing any of the symptoms listed above, you can try troubleshooting the problem yourself by following these steps:

1. Check the oil level. The first thing you should do is check the oil level in the oiler reservoir. If the oil level is low, simply add more oil until it reaches the full mark.
2. Inspect the oiler pump. The oiler pump is responsible for pumping oil to the chain. If the pump is not working properly, it will not be able to lubricate the chain. To inspect the pump, remove the oiler cover and look for any damage to the pump or motor. If you see any damage, you will need to replace the oiler.
3. Check the oil line. The oil line is responsible for transporting oil from the reservoir to the chain. If the oil line is clogged or damaged, it will not be able to deliver oil to the chain. To inspect the oil line, remove the oiler cover and look for any damage to the line. If you see any damage, you will need to replace the oil line.
4. Check the oil filter. The oil filter is responsible for filtering out dirt and debris from the oil. If the oil filter is clogged, it will not be able to properly filter the oil and could lead to damage to the oiler. To inspect the oil filter, remove the oiler cover and look for any damage to the filter. If you see any damage, you will need to replace the oil filter.

Preventative Maintenance

The best way to avoid problems with your Craftsman chainsaw automatic chain oiler is to perform regular preventative maintenance. This includes:

Checking the oil level regularly and adding more oil as needed.
Inspecting the oiler pump, oil line, and oil filter regularly for damage.
Replacing the oil filter regularly according to the manufacturer’s recommendations.

By following these simple steps, you can help to ensure that your Craftsman chainsaw automatic chain oiler continues to work properly for many years to come.

FAQs: Craftsman Chainsaw Automatic Chain Oiler Not Working

Why is my Craftsman chainsaw automatic chain oiler not working?

There are a few possible reasons why your Craftsman chainsaw automatic chain oiler may not be working. Here are some of the most common causes:

The oiler is not properly installed. Make sure that the oiler is installed correctly and that the oiler hose is properly connected to the chainsaw.
The oiler is clogged. The oiler can become clogged with sawdust or other debris, which can prevent the oil from flowing to the chain. To clean the oiler, remove the oiler cover and clean the inside of the oiler with a small brush.
The oiler is not getting enough oil. The oiler may not be getting enough oil if the oil level in the chainsaw is low. Check the oil level and add oil to the chainsaw as needed.
The oiler is not turned on. Make sure that the oiler is turned on. The oiler should have a switch that you can turn on or off.

How do I fix my Craftsman chainsaw automatic chain oiler?

To fix your Craftsman chainsaw automatic chain oiler, you will need to identify the cause of the problem. Once you have identified the cause of the problem, you can follow the steps below to fix it:

If the oiler is not properly installed, reinstall the oiler according to the manufacturer’s instructions.
If the oiler is clogged, clean the oiler with a small brush.
If the oiler is not getting enough oil, add oil to the chainsaw.
If the oiler is not turned on, turn on the oiler.

What are the symptoms of a Craftsman chainsaw automatic chain oiler that is not working?

The symptoms of a Craftsman chainsaw automatic chain oiler that is not working may include:

The chain is not being lubricated properly.
The chain is getting hot.
The chain is smoking.
The chain is wearing out quickly.

What are the dangers of using a Craftsman chainsaw with an automatic chain oiler that is not working?

There are a few dangers of using a Craftsman chainsaw with an automatic chain oiler that is not working. These dangers include:

The chain may not be lubricated properly, which can lead to the chain overheating and smoking.
The chain may be wearing out quickly, which can lead to the chain breaking.
The chain may not be cutting properly, which can lead to accidents.

How can I prevent my Craftsman chainsaw automatic chain oiler from not working?

There are a few things you can do to prevent your Craftsman chainsaw automatic chain oiler from not working. These include:

Install the oiler correctly. Make sure that the oiler is installed according to the manufacturer’s instructions.
Keep the oiler clean. Clean the oiler regularly to prevent it from becoming clogged.
Add oil to the chainsaw regularly. Make sure that the oil level in the chainsaw is always at the proper level.
Turn on the oiler. Make sure that the oiler is turned on when you are using the chainsaw.

Also Read: Craftsman Chainsaw Automatic Oiler Not Working

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *