Craftsman Chainsaw Bar Oiler Not Working: [With Solution]

As a chainsaw repair professional, I understand the frustration and inconvenience that can come with a chainsaw bar oiler not working. Not only can it be dangerous to operate a chainsaw without proper lubrication, but it can also lead to premature wear and tear on the saw. That’s why I’ve put together this troubleshooting guide to help you quickly diagnose and resolve the issue. In this guide, I’ll cover the most common causes of a bar oiler not working, as well as the steps you can take to fix the problem. By following these steps, you can get your chainsaw back up and running in no time.

Most Common Reasons Why Craftsman Chainsaw Bar Oiler Not Working

1. Oiler Hose Clogged

The oiler hose can become clogged with sawdust and debris, preventing oil from reaching the chain. To fix this, remove the oiler hose from the bar and clean it with a wire brush.

2. Oiler Pump Not Working

The oiler pump may not be working properly if it is damaged or worn out. To check the oiler pump, start the chainsaw and listen for the sound of the pump. If you do not hear the pump running, it may need to be replaced.

3. Oil Level Low

If the oil level in the chainsaw is low, the oiler will not be able to pump enough oil to the chain. Check the oil level and add oil if necessary.

4. Oiler Not Adjusted Properly

The oiler may not be adjusted properly, causing it to pump too much or too little oil. To adjust the oiler, follow the instructions in the owner’s manual.

5. Bar Oil Too Thick

If the bar oil is too thick, it will not flow through the oiler properly. Use a bar oil that is designed for chainsaws and that is the correct viscosity for your climate.

6. Bar Oil Too Thin

If the bar oil is too thin, it will evaporate quickly and will not provide adequate lubrication for the chain. Use a bar oil that is the correct viscosity for your climate.

How to Troubleshoot: Craftsman Chainsaw Bar Oiler Not Working

Symptoms of a Craftsman Chainsaw Bar Oiler Not Working

There are a few telltale signs that your Craftsman chainsaw bar oiler is not working properly. These include:

The bar oil reservoir is empty or low.
The bar oil is not flowing to the bar and chain.
The bar and chain are becoming hot and smoking.
The bar and chain are wearing out prematurely.

Troubleshooting a Craftsman Chainsaw Bar Oiler

If you are experiencing any of the symptoms listed above, it is important to troubleshoot the problem as soon as possible to prevent damage to your chainsaw. Here are a few steps to help you troubleshoot the issue:

1. Check the oil level. The first thing you should do is check the oil level in the reservoir. If the reservoir is empty or low, fill it up with the appropriate type of bar oil.
2. Inspect the oil line. The next thing you should do is inspect the oil line for any kinks or blockages. If you find a kink or blockage, straighten it out or remove it.
3. Check the oil pump. The oil pump is responsible for pumping the bar oil to the bar and chain. If the oil pump is not working properly, it will not be able to deliver oil to the bar and chain. To check the oil pump, start the chainsaw and listen for the oil pump to engage. You should be able to hear a faint whirring sound. If you do not hear the oil pump engage, the pump may be faulty and will need to be replaced.
4. Clean the bar and chain. If the bar and chain are dirty, they will not be able to properly lubricate themselves. To clean the bar and chain, use a soft cloth to wipe them down. Be sure to remove all of the dirt, dust, and debris.
5. Adjust the oiler. The oiler can be adjusted to deliver more or less oil to the bar and chain. If the bar and chain are becoming hot and smoking, the oiler may be delivering too much oil. If the bar and chain are wearing out prematurely, the oiler may be delivering too little oil. To adjust the oiler, follow the instructions in your chainsaw owner’s manual.

Preventing Craftsman Chainsaw Bar Oiler Problems

The best way to prevent Craftsman chainsaw bar oiler problems is to follow these simple tips:

Keep the oil level in the reservoir full.
Inspect the oil line regularly for kinks or blockages.
Clean the bar and chain regularly.
Adjust the oiler as needed.

By following these tips, you can help to ensure that your Craftsman chainsaw bar oiler will function properly for many years to come.

FAQs: Craftsman Chainsaw Bar Oiler Not Working

Why is my Craftsman chainsaw bar oiler not working?

There are a few possible reasons why your Craftsman chainsaw bar oiler may not be working. Here are some of the most common causes:

The oiler is not properly adjusted. The oiler may not be delivering enough oil to the bar and chain, or it may be delivering too much oil. To check the adjustment, follow the instructions in your chainsaw’s owner’s manual.
The oiler is clogged. The oiler may be clogged with dirt or debris, preventing it from delivering oil to the bar and chain. To clean the oiler, remove the oiler cover and clean the inside of the oiler with a small brush.
The oiler is broken. The oiler may be broken, preventing it from delivering oil to the bar and chain. If you suspect that the oiler is broken, you will need to replace it.

How do I adjust the oiler on my Craftsman chainsaw?

To adjust the oiler on your Craftsman chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Locate the oiler adjustment screw. The oiler adjustment screw is typically located on the side of the chainsaw, near the bar and chain.
3. Use a small screwdriver to turn the oiler adjustment screw clockwise to increase the oil flow, or counterclockwise to decrease the oil flow.
4. Reattach the oiler cover.
5. Start the chainsaw and test the oil flow. The oil should be flowing evenly onto the bar and chain.

How do I clean the oiler on my Craftsman chainsaw?

To clean the oiler on your Craftsman chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover.
3. Use a small brush to clean the inside of the oiler.
4. Reattach the oiler cover.

How do I replace the oiler on my Craftsman chainsaw?

To replace the oiler on your Craftsman chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover.
3. Remove the old oiler.
4. Install the new oiler.
5. Reattach the oiler cover.

What can I do if my Craftsman chainsaw bar oiler is still not working?

If your Craftsman chainsaw bar oiler is still not working after you have tried the above steps, you may need to take your chainsaw to a qualified service technician for further diagnosis and repair.

Also Read: Craftsman Chainsaw Throttle Not Working