Craftsman Chainsaw Oiler Not Working: [Causes & Proven Fixes]

As a chainsaw owner, there are few things more frustrating than having your saw not work properly. One of the most common problems is a chainsaw oiler that isn’t working. This can be a major inconvenience, as it can lead to the saw overheating and becoming damaged. In this guide, I will walk you through the steps to troubleshoot and resolve a craftsman chainsaw oiler that isn’t working. By the end of this guide, you’ll be able to get your saw back up and running in no time.

Most Common Reasons Why Craftsman Chainsaw Oiler Not Working

Chainsaw Oiler Not Working

Chainsaw Oiler Pump Not Working

The oiler pump may not be working if it is not getting enough oil to the chainsaw. This can be caused by a clogged oil line, a faulty oil pump, or a problem with the carburetor.

Chainsaw Oiler Hose Clogged

The oiler hose can become clogged with sawdust or other debris, which can prevent oil from reaching the chainsaw chain.

Chainsaw Oiler Not Adjusted Correctly

The oiler may not be working properly if it is not adjusted correctly. The oiler should be adjusted so that it is providing a steady stream of oil to the chain.

Chainsaw Oiler Reservoir Empty

The oiler will not work if the reservoir is empty. Make sure to check the oil level regularly and refill the reservoir as needed.

Chainsaw Oiler Not Installed Correctly

The oiler may not be working properly if it is not installed correctly. Make sure to follow the instructions carefully when installing the oiler.

How to Troubleshoot: Craftsman Chainsaw Oiler Not Working

Your Craftsman chainsaw is an essential tool for keeping your yard looking its best. But what happens when the oiler stops working? This can be a frustrating problem, but it’s one that you can usually fix yourself with a little troubleshooting.

In this article, we’ll walk you through the steps of troubleshooting a Craftsman chainsaw oiler that’s not working. We’ll cover everything from checking the oil level to replacing the oiler pump. So if you’re having trouble with your chainsaw oiler, read on for help!

Step 1: Check the Oil Level

The first thing you should do when your chainsaw oiler isn’t working is check the oil level. If the oil level is low, it’s possible that the oiler isn’t pumping enough oil to lubricate the chain.

To check the oil level, simply remove the oil cap and look inside the oil tank. The oil level should be between the full and add marks on the tank. If the oil level is low, add more oil to the tank until it reaches the full mark.

Step 2: Check the Oil Filter

The next thing you should check is the oil filter. The oil filter is located on the bottom of the chainsaw, near the chain bar. The oil filter traps dirt and debris from the oil, and if it becomes clogged, it can prevent the oil from flowing to the chain.

To check the oil filter, remove the oil filter cover and remove the oil filter. Inspect the oil filter for any signs of damage or clogging. If the oil filter is damaged or clogged, replace it with a new one.

Step 3: Check the Oil Pump

If the oil level and oil filter are both okay, then the next thing you should check is the oil pump. The oil pump is responsible for pumping oil to the chain. If the oil pump is not working properly, it can prevent the oil from reaching the chain.

To check the oil pump, start the chainsaw and let it run for a few minutes. While the chainsaw is running, look at the oil line that runs from the oil pump to the chain bar. If the oil line is not dripping oil, then the oil pump is not working properly.

If the oil pump is not working properly, you will need to replace it.

Step 4: Check the Oil Hose

The oil hose is the hose that connects the oil pump to the chain bar. If the oil hose is damaged or kinked, it can prevent the oil from flowing to the chain.

To check the oil hose, inspect it for any signs of damage or kinking. If the oil hose is damaged, replace it with a new one.

Step 5: Check the Oil Chain Catcher

The oil catcher is a small container that catches the excess oil that drips from the chain bar. If the oil catcher is full, it can prevent the oil from flowing to the chain.

To check the oil catcher, remove the oil catcher cover and empty the oil catcher. If the oil catcher is full, empty it and then replace the oil catcher cover.

Step 6: Clean the Chainsaw

After you’ve finished troubleshooting the oiler, it’s a good idea to clean the chainsaw. This will help to prevent future problems with the oiler.

To clean the chainsaw, simply remove the spark plug and pour a small amount of carburetor cleaner into the spark plug hole. Then, turn the chainsaw over and allow the carburetor cleaner to drain out of the spark plug hole.

Next, use a rag to wipe down the outside of the chainsaw. Be sure to clean the oil tank, the oil line, and the oil pump.

Conclusion

These are the steps you can take to troubleshoot a Craftsman chainsaw oiler that’s not working. If you’ve followed these steps and the oiler is still not working, then you may need to take the chainsaw to a qualified service technician.

FAQs: Craftsman Chainsaw Oiler Not Working

Why is my Craftsman chainsaw oiler not working?

There are a few possible reasons why your Craftsman chainsaw oiler may not be working. Here are some of the most common causes:

The oiler is not getting enough oil. This can be caused by a number of factors, such as a clogged oil line, a faulty oil pump, or a low oil level in the tank.
The oiler is not calibrated correctly. The oiler may be calibrated to deliver too much or too little oil, which can cause the saw to run poorly or overheat.
The oiler is not installed correctly. The oiler must be installed properly in order to function properly. If the oiler is not installed correctly, it may not be able to deliver oil to the saw’s chain.

How do I fix my Craftsman chainsaw oiler?

To fix your Craftsman chainsaw oiler, you will need to identify the cause of the problem. Once you have identified the cause, you can take the necessary steps to fix it. Here are some tips for fixing a Craftsman chainsaw oiler:

Check the oil level in the tank. If the oil level is low, add oil to the tank until it reaches the full mark.
Check the oil line for clogs. If the oil line is clogged, you can try to clear the clog by blowing it out with compressed air or by using a wire brush.
Check the oil pump for damage. If the oil pump is damaged, you will need to replace it.
Check the oiler’s calibration. The oiler may be calibrated to deliver too much or too little oil. If the oiler is not calibrated correctly, you can adjust the calibration using the adjustment screw.
Reinstall the oiler. If the oiler is not installed correctly, you will need to reinstall it. Make sure that the oiler is installed securely and that the oil line is properly connected.

What are the symptoms of a Craftsman chainsaw oiler that is not working?

There are a few symptoms that you may notice if your Craftsman chainsaw oiler is not working properly. These symptoms include:

The saw’s chain is not being lubricated properly.
The saw is running hot.
The saw is smoking.
The saw is making a loud noise.

What are the dangers of using a Craftsman chainsaw without an oiler?

Using a Craftsman chainsaw without an oiler can be dangerous. Without proper lubrication, the saw’s chain can become hot and start to smoke. This can lead to the chain breaking, which can cause serious injury. Additionally, a saw that is not properly lubricated can overheat, which can also cause serious injury.

How can I prevent my Craftsman chainsaw oiler from malfunctioning?

There are a few things you can do to prevent your Craftsman chainsaw oiler from malfunctioning. These include:

Keep the oil level in the tank full. A low oil level can cause the oiler to malfunction.
Inspect the oil line for clogs regularly. A clogged oil line can prevent the oiler from delivering oil to the saw’s chain.
Maintain the oil pump regularly. A damaged oil pump can cause the oiler to malfunction.
Calibrate the oiler regularly. An improperly calibrated oiler can deliver too much or too little oil.
Reinstall the oiler correctly. If the oiler is not installed correctly, it can malfunction.

Also Read: Craftsman Chainsaw Primer Bulb Not Working

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *