Craftsman Electric Chainsaw Not Working: [Easy Fixes!]

As a chainsaw repair professional, I’ve seen my fair share of Craftsman electric chainsaws that aren’t working. I know how frustrating and inconvenient it can be when your chainsaw won’t start or won’t stay running. That’s why I’ve put together this troubleshooting guide.

In this guide, I’ll walk you through the steps to diagnose and resolve the most common problems that cause Craftsman electric chainsaws to stop working. I’ll also provide tips on how to prevent these problems from happening in the future.

So if your Craftsman electric chainsaw isn’t working, don’t despair. Just follow the steps in this guide and you’ll be back up and running in no time.

Most Common Reasons Of Craftsman Electric Chainsaw Not Working

1. A faulty power cord

The power cord may be damaged or frayed.
The power cord may be plugged into an outlet that is not working.
The power cord may be plugged into an outlet that is not providing enough power.

2. A faulty switch

The switch may be broken.
The switch may be stuck in the off position.

3. A faulty trigger

The trigger may be broken.
The trigger may be stuck in the on position.

4. A faulty battery

The battery may be dead.
The battery may be disconnected.
The battery may be incompatible with the chainsaw.

5. A faulty chain

The chain may be damaged.
The chain may be too loose or too tight.
The chain may be incorrectly installed.

6. A faulty bar

The bar may be damaged.
The bar may be bent.
The bar may be incorrectly installed.

How to Troubleshoot: Craftsman Electric Chainsaw Not Working

Symptoms

There are a few different symptoms that can indicate that your Craftsman electric chainsaw is not working properly. These include:

The chainsaw won’t start
The chainsaw starts but doesn’t run smoothly
The chainsaw runs but doesn’t have enough power
The chainsaw makes a strange noise
The chainsaw’s chain is not cutting properly

Troubleshooting

If your Craftsman electric chainsaw is not working properly, you can troubleshoot the problem by following these steps:

1. Check the power cord. Make sure that the power cord is plugged into an outlet and that the outlet is working properly.
2. Check the battery. If your chainsaw is battery-powered, make sure that the battery is charged.
3. Check the air filter. The air filter helps to keep dust and debris out of the chainsaw’s engine. If the air filter is dirty, it can cause the chainsaw to run poorly. Clean the air filter according to the manufacturer’s instructions.
4. Check the spark plug. The spark plug helps to ignite the fuel in the chainsaw’s engine. If the spark plug is fouled, it can cause the chainsaw to not start or to run poorly. Clean or replace the spark plug according to the manufacturer’s instructions.
5. Check the carburetor. The carburetor mixes the fuel and air in the correct proportions for the chainsaw’s engine. If the carburetor is not adjusted properly, it can cause the chainsaw to run poorly. Have a qualified technician adjust the carburetor.

Preventative Maintenance

You can help to prevent problems with your Craftsman electric chainsaw by following these tips:

Keep the chainsaw clean and free of debris.
Inspect the chainsaw regularly for wear and tear.
Replace worn or damaged parts as needed.
Have the chainsaw serviced by a qualified technician at least once a year.

By following these tips, you can help to keep your Craftsman electric chainsaw running smoothly for many years to come.

Also Check: Craftsman Incredi-Pull 55Cc Chainsaw Chain Oiler Not Working

FAQs: Craftsman Electric Chainsaw Not Working

Why is my Craftsman electric chainsaw not working?

There are a few possible reasons why your Craftsman electric chainsaw might not be working. Here are some of the most common causes:

The chainsaw is not plugged in properly. Make sure that the chainsaw is plugged into an outlet that is working properly.
The chainsaw is not turned on. Check to make sure that the power switch is in the On position.
The chainsaw’s battery is dead. If the chainsaw is battery-powered, check to make sure that the battery is charged.
The chainsaw’s chain is too tight or too loose. If the chain is too tight, it will not be able to move properly. If the chain is too loose, it will come off of the bar.
The chainsaw’s bar is bent. If the bar is bent, it will not be able to move properly.
The chainsaw’s chain is dull. A dull chain will not be able to cut through wood properly.

How do I fix my Craftsman electric chainsaw?

Once you have determined the cause of the problem, you can fix your Craftsman electric chainsaw by following these steps:

If the chainsaw is not plugged in properly, plug it into an outlet that is working properly.
If the chainsaw is not turned on, turn the power switch to the On position.
If the chainsaw’s battery is dead, charge the battery.
If the chainsaw’s chain is too tight or too loose, adjust the chain tension.
If the chainsaw’s bar is bent, straighten the bar.
If the chainsaw’s chain is dull, sharpen the chain.

What should I do if my Craftsman electric chainsaw is still not working after I have tried to fix it?

If your Craftsman electric chainsaw is still not working after you have tried to fix it, you should contact a Craftsman customer service representative for assistance.

What are some tips for preventing Craftsman electric chainsaw problems?

Here are some tips for preventing Craftsman electric chainsaw problems:

Always read the owner’s manual before using your chainsaw. The owner’s manual will provide you with important information about how to use your chainsaw safely and properly.
Inspect your chainsaw regularly for signs of wear and tear. If you notice any damage to your chainsaw, have it repaired or replaced immediately.
Store your chainsaw in a dry, cool place. Storing your chainsaw in a humid or hot environment can damage the components of the chainsaw.
Keep your chainsaw clean. A dirty chainsaw can be more difficult to start and operate.
Use the correct type of chain oil for your chainsaw. Using the wrong type of chain oil can damage the chain and the bar.

What are the safety precautions I should take when using a Craftsman electric chainsaw?

When using a Craftsman electric chainsaw, it is important to take the following safety precautions:

Wear safety glasses and hearing protection. Safety glasses will protect your eyes from flying debris, and hearing protection will protect your hearing from the noise of the chainsaw.
Dress appropriately. Wear long pants, long-sleeved shirts, and sturdy shoes. Avoid wearing loose clothing that could get caught in the chainsaw.
Be aware of your surroundings. Make sure you have a clear work area and that there are no people or animals in the area.
Start the chainsaw with the chain stopped. Never start the chainsaw with the chain moving.
Keep the chain sharp. A sharp chain will be easier to control and will reduce the risk of injury.
Never cut wet wood. Wet wood is more likely to kickback than dry wood.
Never cut overhead. Cutting overhead increases the risk of the chainsaw coming back and hitting you.
Be careful when cutting branches. Branches can be unstable and can fall unexpectedly.
Never leave the chainsaw running unattended. Always turn off the chainsaw and remove the spark plug before leaving it unattended.

By following these safety precautions, you can help reduce the risk of injury when using a Craftsman electric chainsaw.