Craftsman Electric Hedge Trimmer Won’t Start? Here’s How to Fix It!

Electric Hedge Trimmer Won’t Start

The trimmer is not plugged in:
Make sure the trimmer is plugged into an outlet and that the outlet is working.

The trimmer’s battery is dead:
Charge the battery or replace it with a new one.

The trimmer’s switch is turned off:
Turn the switch on.

The trimmer’s trigger is not depressed:
Depress the trigger to start the trimmer.

The trimmer’s blade is jammed:
Clear the jam and try starting the trimmer again.

The trimmer’s motor is overheating:
Allow the trimmer to cool down before starting it again.

The trimmer’s motor is damaged:
Take the trimmer to a qualified repair technician for service.

Craftsman Electric Hedge Trimmer Won T Start

Reasons Why a Craftsman Electric Hedge Trimmer Won’t Start

The trimmer is not plugged in properly. Make sure that the trimmer is plugged into an outlet that is working and that the plug is firmly inserted into the outlet.
The trimmer’s battery is dead. If the trimmer is battery-powered, try charging the battery for a few hours and then trying to start the trimmer again.
The trimmer’s switch is turned off. Make sure that the switch is turned to the On position.
The trimmer’s cord is damaged. If the trimmer is corded, check the cord for any damage. If the cord is damaged, you will need to replace it.
The trimmer’s blade is clogged with debris. Clean the trimmer’s blade to remove any debris that may be preventing it from starting.
The trimmer’s engine is flooded. If the trimmer’s engine is flooded, you will need to perform a spark plug dryout.
The trimmer’s carburetor is dirty. If the trimmer’s carburetor is dirty, you will need to clean it.
The trimmer’s spark plug is bad. If the trimmer’s spark plug is bad, you will need to replace it.

How to Troubleshoot And Fix: Craftsman Electric Hedge Trimmer Won’t Start

Symptoms

There are a few different symptoms that can indicate that your Craftsman electric hedge trimmer is not starting properly. These include:

The trimmer won’t turn on at all.
The trimmer turns on but doesn’t run.
The trimmer runs but only for a short period of time before cutting out.
The trimmer runs but doesn’t produce enough power to cut through branches.

Troubleshooting

If your Craftsman electric hedge trimmer is not starting properly, you can troubleshoot the problem by following these steps:

1. Check the power cord:
Make sure that the power cord is plugged into an outlet and that the outlet is working properly.

2. Check the battery:
If your trimmer is battery-powered, make sure that the battery is charged and properly inserted into the trimmer.3. Check the spark plug:
If your trimmer is gas-powered, remove the spark plug and check to see if it is clean and free of debris. If the spark plug is dirty, clean it with a wire brush. If the spark plug is damaged, replace it with a new one.

4. Check the air filter:
If your trimmer is gas-powered, remove the air filter and check to see if it is dirty or clogged. If the air filter is dirty, clean it with a clean cloth. If the air filter is damaged, replace it with a new one.

5. Check the fuel system:
If your trimmer is gas-powered, check to make sure that the fuel tank is full and that the fuel line is not clogged.

6. Check the carburetor:
If your trimmer is gas-powered, the carburetor may be dirty or out of adjustment. If you are not comfortable working on the carburetor, you should take your trimmer to a qualified technician for repairs.

Fixing the Problem

Once you have identified the problem with your Craftsman electric hedge trimmer, you can fix it by following these steps:

1. Fix the power cord:
If the power cord is damaged, you can replace it with a new one.

2. Charge the battery:
If the battery is not charged, you can charge it by plugging it into an outlet.3. Clean the spark plug:
If the spark plug is dirty, you can clean it with a wire brush.

4. Replace the air filter:
If the air filter is dirty or damaged, you can replace it with a new one.

5. Fix the fuel system:
If the fuel tank is empty or the fuel line is clogged, you can fix the problem by filling the tank and clearing the line.

6. Adjust the carburetor:
If the carburetor is dirty or out of adjustment, you can adjust it by following the manufacturer’s instructions.

Preventing Problems

You can prevent problems with your Craftsman electric hedge trimmer by following these tips:

Keep the trimmer clean and well-maintained:
This means regularly cleaning the trimmer’s housing, sharpening the blades, and replacing worn-out parts.

Store the trimmer in a safe place:
When you are not using the trimmer, store it in a cool, dry place.

Don’t overload the trimmer:
Only use the trimmer for tasks that it is designed for.

Use the correct type of fuel:
Make sure that you are using the correct type of fuel for your trimmer.

Follow the manufacturer’s instructions:
Always follow the manufacturer’s instructions for operating and maintaining your trimmer.

By following these tips, you can help to prevent problems with your Craftsman electric hedge trimmer and keep it running smoothly for many years to come.

Also Read: Craftsman Hedge Trimmer 2.6 Amp Bushwacker Stop Working