Craftsman Hedge Trimmer Won’t Start? Here’s Why!

No Spark

The most common reason why a Craftsman hedge trimmer won’t start is because there is no spark. This can be caused by a number of things, including:
A faulty spark plug
A dirty or corroded spark plug wire
A bad ignition coil
A loose or damaged spark plug cap

No Fuel

Another common reason why a Craftsman hedge trimmer won’t start is because there is no fuel. This can be caused by a number of things, including:
A empty fuel tank
A clogged fuel filter
A bad fuel line

Clogged Air Filter

A clogged air filter can also prevent a Craftsman hedge trimmer from starting. This is because the air filter prevents dirt and debris from entering the engine, and if it is clogged, it can restrict the airflow to the engine, causing it to stall.

Bad Carburetor

A bad carburetor can also prevent a Craftsman hedge trimmer from starting. The carburetor is responsible for mixing the fuel and air in the correct proportions, and if it is not working properly, it can cause the engine to stall or not start at all.

Bad Ignition Switch

Finally, a bad ignition switch can also prevent a Craftsman hedge trimmer from starting. The ignition switch is responsible for sending power to the spark plug, and if it is not working properly, the spark plug will not fire, and the engine will not start.

Craftsman Hedge Trimmer Won T Start

Craftsman Hedge Trimmer Won’t Start Here’s Why!

1. Faulty spark plug

The spark plug is responsible for igniting the fuel in the engine. If the spark plug is faulty, it will not be able to produce a spark, and the engine will not start.

2. Dirty air filter

The air filter prevents dirt and debris from entering the engine. If the air filter is dirty, it will restrict airflow to the engine, which can cause the engine to stall or not start at all.

3. Bad gas

Old or stale gas can cause problems with starting the engine. Make sure to use fresh gas in your hedge trimmer.

4. Clogged fuel filter

The fuel filter removes dirt and debris from the fuel before it reaches the engine. If the fuel filter is clogged, it will restrict the flow of fuel to the engine, which can cause the engine to stall or not start at all.

5. Weak battery

The battery provides the power to start the engine. If the battery is weak, it may not be able to provide enough power to start the engine.

6. Faulty starter

The starter is responsible for turning the engine over. If the starter is faulty, it will not be able to turn the engine over, and the engine will not start.

How to Troubleshoot and Fix: Craftsman Hedge Trimmer Won’t Start

Symptoms

There are a few different symptoms that can indicate that your Craftsman hedge trimmer is not starting properly. These include:

The trimmer won’t start at all
The trimmer starts but then dies immediately
The trimmer starts but then runs erratically
The trimmer starts but doesn’t produce much power

Causes

There are a number of different things that could cause your Craftsman hedge trimmer to not start properly. These include:

A dirty or clogged air filter
A bad spark plug
A faulty fuel line
A problem with the carburetor
A problem with the ignition switch

Troubleshooting

To troubleshoot the problem with your Craftsman hedge trimmer, you will need to first identify the cause of the issue. Here are a few steps to help you do this:

1. Check the air filter. If the air filter is dirty or clogged, it can prevent the engine from getting enough air, which can cause it to not start properly. To clean the air filter, remove it from the trimmer and rinse it with warm water. Allow the air filter to dry completely before reinstalling it.
2. Check the spark plug. If the spark plug is bad, it can prevent the engine from firing, which can also cause it to not start properly. To check the spark plug, remove it from the engine and inspect it for damage. If the spark plug is damaged, replace it with a new one.
3. Check the fuel line. If the fuel line is clogged, it can prevent the engine from getting enough fuel, which can also cause it to not start properly. To check the fuel line, inspect it for kinks or blockages. If you find a blockage, clear it out or replace the fuel line.
4. Check the carburetor. If the carburetor is dirty or malfunctioning, it can prevent the engine from running properly, which can also cause it to not start properly. To check the carburetor, remove it from the engine and inspect it for damage or debris. If you find any damage or debris, clean the carburetor or replace it.
5. Check the ignition switch. If the ignition switch is faulty, it can prevent the engine from starting properly. To check the ignition switch, turn the trimmer on and off several times. If the trimmer does not start or if it starts and then dies immediately, the ignition switch may be faulty. Replace the ignition switch if necessary.

Fixing the Problem

Once you have identified the cause of the problem with your Craftsman hedge trimmer, you can fix it by following the steps below:

To clean the air filter, remove it from the trimmer and rinse it with warm water. Allow the air filter to dry completely before reinstalling it.
To replace the spark plug, remove the old spark plug from the engine and install a new one. Make sure that the new spark plug is the correct size for your trimmer.
To clear a blockage in the fuel line, use a small wire to dislodge the blockage. If the blockage is too large to dislodge, you may need to replace the fuel line.
To clean the carburetor, remove it from the engine and soak it in a carburetor cleaner. Follow the instructions on the carburetor cleaner label for the proper amount of time to soak the carburetor. After soaking the carburetor, rinse it thoroughly with water and reinstall it on the engine.
To replace the ignition switch, disconnect the wires from the old ignition switch and connect them to the new ignition switch. Make sure that the wires are connected to the correct terminals on the new ignition switch.

Prevention

To prevent problems with your Craftsman hedge trimmer, you can take the following steps:

Keep the air filter clean. A dirty or clogged air filter can prevent the engine from getting enough air, which can cause it to not start properly.
Replace the spark plug regularly. A bad spark plug can prevent the engine from firing, which can also cause it to not start properly.
Inspect the fuel line regularly for kinks or blockages. A kinked or blocked fuel line can prevent the engine from getting enough fuel, which can also cause it to not start properly.
Clean the carburetor regularly. A dirty or malfunctioning carburetor can prevent the engine from running properly, which can also cause it to not start properly.
Replace the ignition switch if necessary. A faulty ignition switch can prevent the engine from starting properly.

By following these tips, you can help to keep your Craftsman hedge trimmer running properly and avoid problems with it not starting.

Also Read: Dewalt 20 Volt Max Hedge Trimmer Stop Working