Craftsman Incredi-Pull 55Cc Chainsaw Chain Oiler Not Working: [Quick Fixes]

As a chainsaw owner, there are few things more frustrating than having your chain oiler stop working. Not only can it lead to damage to your saw, but it can also be a safety hazard. If your chain isn’t properly lubricated, it can become hot and dangerous to operate.

In this guide, I will walk you through the steps to troubleshoot a Craftsman Incredi-Pull 55cc chainsaw chain oiler that is not working. I will cover common causes of the problem, as well as how to fix them. By the end of this guide, you will be able to get your saw back up and running in no time.

I understand how frustrating this issue can be, so I want to thank you for taking the time to read this guide. I hope that it will help you resolve the problem quickly and easily.

Most Common Reasons Of Craftsman Incredi-Pull 55Cc Chainsaw Chain Oiler Not Working

Most Common Reasons Of Craftsman Incredi-Pull 55Cc Chainsaw Chain Oiler Not Working

1. Chain oiler is not turned on

The most common reason for a chainsaw chain oiler not working is that it is simply not turned on. Make sure that the chain oiler switch is in the on position.

2. Chain oiler is clogged

If the chain oiler is clogged, it will not be able to properly lubricate the chain. To clean the chain oiler, remove the oiler cover and clean out any debris that may be blocking the oil flow.

3. Chain oiler is empty

If the chain oiler is empty, it will not be able to lubricate the chain. Make sure that the chain oiler is filled with the correct type of oil.

4. Chain oiler hose is kinked or damaged

If the chain oiler hose is kinked or damaged, it will not be able to properly deliver oil to the chain. Check the chain oiler hose for any kinks or damage and replace it if necessary.

5. Chain oiler pump is faulty

If the chain oiler pump is faulty, it will not be able to properly pump oil to the chain. In this case, the chain oiler will need to be replaced.

How to Troubleshoot: Craftsman Incredi-Pull 55cc Chainsaw Chain Oiler Not Working

Symptoms

There are a few different symptoms that you may experience if the chain oiler on your Craftsman Incredi-Pull 55cc chainsaw is not working properly. These include:

The chain is not being lubricated properly, which can lead to it overheating and becoming damaged.
The chain is leaving a trail of oil behind it as it cuts through wood.
The oil reservoir is empty or nearly empty, even though you have been using the chainsaw regularly.
The oiler is making a strange noise when you are using the chainsaw.

Troubleshooting

If you are experiencing any of the symptoms listed above, there are a few things you can check to troubleshoot the problem.

1. Check the oil level. The first thing you should do is check the oil level in the reservoir. If the reservoir is empty or nearly empty, you will need to add more oil.

2. Check the oiler hose. The next thing you should do is check the oiler hose to make sure that it is not kinked or blocked. If the hose is kinked, you can try to straighten it out. If the hose is blocked, you will need to clean it out.

3. Check the oiler pump. The oiler pump is responsible for pumping oil from the reservoir to the chain. If the pump is not working properly, you will need to replace it.

4. Check the oil filter. The oil filter helps to keep dirt and debris from getting into the oiler pump. If the oil filter is clogged, it can prevent the oil from flowing properly. You should check the oil filter regularly and replace it as needed.

5. Check the oil valve. The oil valve is responsible for controlling the flow of oil to the chain. If the oil valve is not working properly, it can prevent the oil from reaching the chain. You should check the oil valve regularly and replace it as needed.

6. Check the carburetor. The carburetor is responsible for mixing air and fuel to create the proper air-fuel mixture for the engine. If the carburetor is not adjusted properly, it can cause the engine to run lean, which can lead to the chain oiler not working properly. You should have the carburetor adjusted by a qualified technician.

7. Check the spark plug. The spark plug is responsible for igniting the air-fuel mixture in the engine. If the spark plug is not working properly, it can cause the engine to misfire, which can lead to the chain oiler not working properly. You should check the spark plug regularly and replace it as needed.

8. Check the engine valves. The engine valves are responsible for letting air into the engine and letting exhaust out of the engine. If the valves are not adjusted properly, they can cause the engine to run rough, which can lead to the chain oiler not working properly. You should have the valves adjusted by a qualified technician.

If you have checked all of the above and the chain oiler is still not working properly, you may need to take your chainsaw to a qualified technician for further diagnosis and repair.

Preventative Maintenance

The best way to prevent problems with the chain oiler on your Craftsman Incredi-Pull 55cc chainsaw is to perform regular preventative maintenance. This includes:

Checking the oil level regularly and adding more oil as needed.
Checking the oiler hose regularly for kinks or blockages.
Cleaning the oiler pump regularly.
Replacing the oil filter regularly.
Checking the oil valve regularly and replacing it as needed.
Having the carburetor adjusted regularly by a qualified technician.
Checking the spark plug regularly and replacing it as needed.
Having the engine valves adjusted regularly by a qualified technician.

By following these simple steps, you can help to keep your Craftsman Incredi-Pull 55cc chainsaw running smoothly and prevent problems with the chain oiler.

Also Check: Dewalt 60V Chainsaw Not Working

FAQs: Craftsman Incredi-Pull 55cc Chainsaw Chain Oiler Not Working

Why is the chain oiler not working on my Craftsman Incredi-Pull 55cc chainsaw?

There are a few possible reasons why the chain oiler on your Craftsman Incredi-Pull 55cc chainsaw may not be working. Here are some of the most common causes:

The oiler is not properly adjusted. The oiler may not be delivering enough oil to the chain if it is not properly adjusted. To adjust the oiler, follow the instructions in your chainsaw’s owner’s manual.
The oiler is clogged. The oiler may be clogged if there is too much sawdust or debris in the oil reservoir. To clean the oiler, remove the oil reservoir from the chainsaw and clean it with a soft cloth.
The oiler is not getting enough oil. The oiler may not be getting enough oil if the oil level in the reservoir is too low. To check the oil level, remove the oil cap and look inside the reservoir. The oil level should be between the full and add marks.
The oiler is defective. If the oiler is defective, it may need to be replaced.

How do I adjust the oiler on my Craftsman Incredi-Pull 55cc chainsaw?

To adjust the oiler on your Craftsman Incredi-Pull 55cc chainsaw, follow these steps:

1. Locate the oiler adjustment screw. The oiler adjustment screw is located on the side of the chainsaw, near the oil reservoir.
2. Turn the adjustment screw clockwise to increase the oil flow or counterclockwise to decrease the oil flow.
3. Test the oil flow by running the chainsaw and observing the chain. The chain should be lubricated evenly. If the chain is not being lubricated properly, adjust the oiler again.

How do I clean the oiler on my Craftsman Incredi-Pull 55cc chainsaw?

To clean the oiler on your Craftsman Incredi-Pull 55cc chainsaw, follow these steps:

1. Remove the oil reservoir from the chainsaw.
2. Use a soft cloth to wipe out the inside of the oil reservoir.
3. Clean the oiler valve with a small brush.
4. Replace the oil reservoir on the chainsaw.

How do I make sure the oiler is getting enough oil?

To make sure the oiler is getting enough oil, follow these steps:

1. Check the oil level in the reservoir regularly. The oil level should be between the full and add marks.
2. Add oil to the reservoir as needed.
3. Make sure the oiler is not clogged. Clean the oiler if it is clogged.

What should I do if the oiler is defective?

If the oiler is defective, it should be replaced. To replace the oiler, follow these steps:

1. Remove the old oiler from the chainsaw.
2. Install the new oiler on the chainsaw.
3. Adjust the oiler as needed.

After replacing the oiler, test the chainsaw to make sure the oiler is working properly.