Dewalt 60V Chainsaw Not Working: [Easy Troubleshooting]

As a chainsaw repair professional, I’ve seen my fair share of Dewalt 60v chainsaws that aren’t working. I know how frustrating it can be when your chainsaw won’t start, and I understand the importance of quickly diagnosing and resolving the problem. That’s why I’ve put together this troubleshooting guide.

In this guide, I’ll walk you through the steps to troubleshoot a Dewalt 60v chainsaw that isn’t working. I’ll cover everything from simple checks like checking the battery charge to more complex repairs like replacing the spark plug. By the end of this guide, you’ll be able to identify and fix the problem with your chainsaw, so you can get back to using it in no time.

Disclaimer

This guide is intended for informational purposes only. I am not a certified Dewalt technician, and I cannot guarantee that the information in this guide will work for your specific chainsaw. If you are unsure about how to troubleshoot your chainsaw, please consult a qualified technician.

Most Common Reasons Of Dewalt 60V Chainsaw Not Working

Most Common Reasons Of Dewalt 60V Chainsaw Not Working

1. Insufficient Battery Power

The most common reason for a Dewalt 60V chainsaw not working is insufficient battery power. Make sure the battery is fully charged before using the chainsaw.
If the battery is not fully charged, the chainsaw will not have enough power to operate properly.
The battery level can be checked on the chainsaw’s display screen.

2. Dirty or Clogged Air Filter

A dirty or clogged air filter can restrict airflow to the chainsaw’s engine, causing it to overheat and eventually stop working.
To clean the air filter, remove it from the chainsaw and rinse it with warm, soapy water.
Allow the air filter to dry completely before reinstalling it.

3. Faulty Spark Plug

A faulty spark plug can prevent the chainsaw from starting or running properly.
To check the spark plug, remove it from the chainsaw and inspect it for damage.
If the spark plug is damaged, replace it with a new one.

4. Low Oil Level

A low oil level can cause the chainsaw’s engine to overheat and eventually stop working.
To check the oil level, remove the oil filler cap and check the oil level on the dipstick.
If the oil level is low, add oil to the chainsaw until the level reaches the full mark on the dipstick.

5. Chain Tension Too Tight

A chain that is too tight can cause the chainsaw to stall or not start.
To check the chain tension, loosen the chain tensioner until the chain can be lifted about 1/2 inch off the bar.
Tighten the chain tensioner until the chain is snug against the bar.

6. Chain Tension Too Loose

A chain that is too loose can come off the bar and cause serious injury.
To check the chain tension, loosen the chain tensioner until the chain can be lifted about 1/2 inch off the bar.
Tighten the chain tensioner until the chain is snug against the bar.

7. Chain Brake Engaged

The chain brake can be engaged accidentally, preventing the chainsaw from starting or running.
To check if the chain brake is engaged, look for the red button on the front of the chainsaw.
If the red button is depressed, the chain brake is engaged.
To disengage the chain brake, press the red button.

How to Troubleshoot: Dewalt 60V Chainsaw Not Working

Symptoms of a Dewalt 60V Chainsaw Not Working

There are a few different symptoms that may indicate that your Dewalt 60V chainsaw is not working properly. These include:

The chainsaw won’t start
The chainsaw starts but then dies
The chainsaw makes a strange noise
The chainsaw is not cutting through wood as well as it used to
The chainsaw is overheating

Troubleshooting a Dewalt 60V Chainsaw

If your Dewalt 60V chainsaw is not working properly, there are a few things you can check to troubleshoot the problem.

Check the battery. Make sure that the battery is charged and properly installed in the chainsaw. If the battery is not charged, you may need to charge it for a few hours before using it. If the battery is installed correctly, but the chainsaw still won’t start, you may need to replace the battery.
Check the air filter. The air filter on your chainsaw helps to keep dirt and debris from getting into the engine. If the air filter is dirty, it can cause the chainsaw to start and run poorly. To check the air filter, remove the cover on the side of the chainsaw and remove the air filter. Clean the air filter with a clean cloth or air compressor. If the air filter is damaged, you will need to replace it.
Check the spark plug. The spark plug is responsible for igniting the fuel in the chainsaw engine. If the spark plug is dirty or damaged, it can cause the chainsaw to start and run poorly. To check the spark plug, remove the spark plug boot and unscrew the spark plug. Clean the spark plug with a wire brush and inspect it for damage. If the spark plug is damaged, you will need to replace it.
Check the fuel line. The fuel line on your chainsaw carries fuel from the fuel tank to the carburetor. If the fuel line is kinked or damaged, it can cause the chainsaw to start and run poorly. To check the fuel line, inspect it for any kinks or damage. If the fuel line is damaged, you will need to replace it.
Check the carburetor. The carburetor on your chainsaw mixes air and fuel to create a combustible mixture that is ignited by the spark plug. If the carburetor is not adjusted properly, it can cause the chainsaw to start and run poorly. To check the carburetor, you will need to remove the carburetor from the chainsaw and adjust the carburetor according to the manufacturer’s instructions.

Preventative Maintenance for Your Dewalt 60V Chainsaw

The best way to keep your Dewalt 60V chainsaw running smoothly is to perform regular preventative maintenance. This includes:

Cleaning the chainsaw after each use. This will help to remove dirt and debris from the chainsaw and prevent it from damaging the engine.
Lubricating the chainsaw chain. This will help to keep the chain running smoothly and prevent it from wearing out prematurely.
Checking the air filter regularly. This will help to keep the chainsaw running smoothly and prevent it from becoming clogged.
Checking the spark plug regularly. This will help to ensure that the spark plug is properly firing and that the chainsaw is starting and running properly.
Checking the fuel line regularly. This will help to prevent the fuel line from becoming kinked or damaged.
Checking the carburetor regularly. This will help to ensure that the carburetor is adjusted properly and that the chainsaw is starting and running properly.

By following these tips, you can help to keep your Dewalt 60V chainsaw running smoothly for many years to come.

Also Check: Dewalt Electric Chainsaw 20V Not Working

FAQs: Dewalt 60V Chainsaw Not Working

Why is my Dewalt 60V chainsaw not working?

There are a few possible reasons why your Dewalt 60V chainsaw might not be working. Here are some of the most common causes:

The battery is not charged. Make sure that the battery is fully charged before using the chainsaw.
The battery is not inserted correctly. Check to make sure that the battery is inserted all the way into the chainsaw.
The chainsaw is not turned on. Make sure that the chainsaw is turned on before using it.
The chainsaw is clogged with sawdust. Clean the chainsaw’s air filter and chain brake to prevent it from becoming clogged.
The chainsaw’s chain is dull. Sharpen the chainsaw’s chain to improve its performance.

What should I do if my Dewalt 60V chainsaw is not working?

If your Dewalt 60V chainsaw is not working, here are a few things you can try:

Check the battery. Make sure that the battery is fully charged and that it is inserted correctly into the chainsaw.
Turn on the chainsaw. Make sure that the chainsaw is turned on before using it.
Clean the chainsaw’s air filter and chain brake. Clean the chainsaw’s air filter and chain brake to prevent it from becoming clogged.
Sharpen the chainsaw’s chain. Sharpen the chainsaw’s chain to improve its performance.
Take the chainsaw to a service center. If you have tried all of the above steps and your chainsaw is still not working, you may need to take it to a service center for repairs.

How do I charge my Dewalt 60V chainsaw battery?

To charge your Dewalt 60V chainsaw battery, follow these steps:

1. Remove the battery from the chainsaw.
2. Plug the battery charger into an outlet.
3. Insert the battery into the charger.
4. The charger will light up to indicate that it is charging the battery.
5. Once the battery is fully charged, the charger will turn off.

How long does it take to charge my Dewalt 60V chainsaw battery?

It takes approximately 2 hours to charge a Dewalt 60V chainsaw battery.

How do I maintain my Dewalt 60V chainsaw?

To maintain your Dewalt 60V chainsaw, follow these steps:

Clean the chainsaw after each use. Clean the chainsaw’s air filter and chain brake to prevent it from becoming clogged.
Sharpen the chainsaw’s chain regularly. Sharpen the chainsaw’s chain to improve its performance.
Inspect the chainsaw for damage. Inspect the chainsaw for any damage, such as cracks in the housing or loose bolts.
Replace worn or damaged parts. Replace any worn or damaged parts on the chainsaw as soon as possible.

By following these tips, you can help to keep your Dewalt 60V chainsaw in good working order for years to come.