Dewalt Electric Chainsaw 20V Not Working: [Fixed]

A is a common problem that can be frustrating and inconvenient for chainsaw owners. There are a number of possible causes for this issue, and it is important to quickly diagnose and resolve the problem in order to restore functionality to the tool.

In this guide, I will walk you through the steps to troubleshoot a DeWalt electric chainsaw 20v that is not working. I will cover the most common causes of this issue, as well as provide tips on how to fix them. By following these steps, you should be able to get your chainsaw up and running again in no time.

Most Common Reasons Of Dewalt Electric Chainsaw 20V Not Working

Dewalt Electric Chainsaw 20V Not Working

The battery is not charged

Make sure the battery is fully charged.
If the battery is not charging, try a different battery or charger.

The battery is not inserted correctly

Make sure the battery is inserted all the way into the chainsaw.
If the battery is not inserted correctly, the chainsaw will not turn on.

The chainsaw is not turned on

Make sure the chainsaw is turned on.
The switch is usually located on the back of the chainsaw.

The chainsaw is jammed

If the chainsaw is jammed, it will not turn on.
To unjam the chainsaw, turn it off and disconnect the battery.
Use a small screwdriver to pry the chainsaw open.
Remove any debris that is jamming the chainsaw.
Reassemble the chainsaw and reconnect the battery.

The chainsaw chain is too loose

If the chainsaw chain is too loose, it will not turn on.
To tighten the chainsaw chain, use a chainsaw chain tensioner.

The chainsaw chain is too tight

If the chainsaw chain is too tight, it will not turn on.
To loosen the chainsaw chain, use a chainsaw chain tensioner.

The chainsaw chain is dull

If the chainsaw chain is dull, it will not cut through wood effectively.
To sharpen the chainsaw chain, use a chainsaw chain sharpener.

The chainsaw bar is damaged

If the chainsaw bar is damaged, it will not cut through wood effectively.
To replace the chainsaw bar, use a new chainsaw bar.

The chainsaw sprocket is damaged

If the chainsaw sprocket is damaged, it will not drive the chainsaw chain.
To replace the chainsaw sprocket, use a new chainsaw sprocket.

How to Troubleshoot: Dewalt Electric Chainsaw 20V Not Working

Symptoms of a Dewalt Electric Chainsaw 20V Not Working

There are a few different symptoms that may indicate that your Dewalt electric chainsaw 20V is not working properly. These include:

The chainsaw won’t start
The chainsaw starts but won’t stay running
The chainsaw runs but won’t cut through wood
The chainsaw makes a strange noise
The chainsaw is overheating

Troubleshooting a Dewalt Electric Chainsaw 20V

If your Dewalt electric chainsaw 20V is not working properly, you can troubleshoot the issue by following these steps:

1. Check the battery. Make sure that the battery is properly charged and inserted into the chainsaw. If the battery is not charged, you may need to charge it for a few hours before using it. If the battery is inserted correctly, but the chainsaw still won’t start, you may need to replace the battery.
2. Check the air filter. The air filter helps to keep the chainsaw engine clean and running properly. If the air filter is dirty, it can restrict airflow to the engine and cause the chainsaw to not start or run properly. To check the air filter, remove the cover and inspect the filter. If the filter is dirty, you can clean it with a dry cloth or replace it with a new one.
3. Check the spark plug. The spark plug helps to ignite the fuel in the chainsaw engine. If the spark plug is dirty or damaged, it can cause the chainsaw to not start or run properly. To check the spark plug, remove it from the engine and inspect it. If the spark plug is dirty, you can clean it with a wire brush. If the spark plug is damaged, you will need to replace it.
4. Check the carburetor. The carburetor helps to mix the fuel and air in the correct proportions for the chainsaw engine. If the carburetor is not adjusted properly, it can cause the chainsaw to not start or run properly. To check the carburetor, you will need to consult your chainsaw owner’s manual.
5. Take your chainsaw to a qualified repair technician. If you have tried troubleshooting the issue yourself and you are still unable to get your chainsaw to work properly, you may need to take it to a qualified repair technician. A repair technician will be able to diagnose the problem and make the necessary repairs.

Preventing Problems with Your Dewalt Electric Chainsaw 20V

You can help prevent problems with your Dewalt electric chainsaw 20V by following these tips:

Keep the chainsaw clean and well-maintained. This includes regularly cleaning the air filter and spark plug, and making sure that the carburetor is adjusted properly.
Store the chainsaw in a cool, dry place. This will help to prevent the engine from overheating and the battery from discharging.
Use the chainsaw only for its intended purpose. Do not use the chainsaw to cut metal or other materials that could damage the blade.
Inspect the chainsaw regularly for signs of wear and tear. If you notice any damage, have the chainsaw repaired or replaced before using it again.

By following these tips, you can help to keep your Dewalt electric chainsaw 20V running smoothly and safely for many years to come.

Also Check: Dewalt Electric Chainsaw Not Working

FAQs: Dewalt Electric Chainsaw 20v Not Working

Why is my Dewalt electric chainsaw 20v not working?

There are a few possible reasons why your Dewalt electric chainsaw 20v might not be working. Here are some of the most common causes:

The battery is not charged. Make sure that the battery is fully charged before using the chainsaw.
The battery is not inserted correctly. Make sure that the battery is inserted all the way into the chainsaw.
The chainsaw is not turned on. Check to make sure that the chainsaw is turned on.
The chainsaw is jammed. If the chainsaw is jammed, try to clear the jam by turning the chainsaw off and then on again.
The chainsaw is overheating. If the chainsaw is overheating, let it cool down for a few minutes before using it again.

What should I do if my Dewalt electric chainsaw 20v is not working?

If your Dewalt electric chainsaw 20v is not working, here are some steps you can take to troubleshoot the problem:

1. Check the battery. Make sure that the battery is fully charged and that it is inserted correctly into the chainsaw.
2. Turn the chainsaw on. Check to make sure that the chainsaw is turned on.
3. Clear the jam. If the chainsaw is jammed, try to clear the jam by turning the chainsaw off and then on again.
4. Let the chainsaw cool down. If the chainsaw is overheating, let it cool down for a few minutes before using it again.
5. Contact customer service. If you have tried all of these steps and the chainsaw is still not working, contact Dewalt customer service for assistance.

How do I charge my Dewalt electric chainsaw 20v battery?

To charge your Dewalt electric chainsaw 20v battery, follow these steps:

1. Plug the charger into an outlet.
2. Insert the battery into the charger.
3. The charger will light up to indicate that it is charging the battery.
4. The battery will be fully charged in approximately 2 hours.

How long does it take to charge a Dewalt electric chainsaw 20v battery?

A Dewalt electric chainsaw 20v battery takes approximately 2 hours to charge fully.

How many amps does a Dewalt electric chainsaw 20v battery have?

A Dewalt electric chainsaw 20v battery has a capacity of 2.0 Ah.

 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *