Dewalt Pressure Washer Not Working: [Step-By-Step Fixes]

A DeWalt pressure washer that is not working can be a major inconvenience. It can prevent you from cleaning your home, car, or other outdoor surfaces. It can also be frustrating and time-consuming to troubleshoot the problem.

This guide will help you quickly diagnose and resolve the most common issues that cause DeWalt pressure washers to stop working. By following the steps in this guide, you can get your pressure washer back up and running in no time.

Here are some of the common reasons why a DeWalt pressure washer might not be working:

The power cord is not plugged in properly.
The pressure washer is not turned on.
The water supply is turned off.
The pressure washer is clogged.
The pressure washer pump is damaged.

By following the steps in this guide, you can quickly and easily troubleshoot these common problems and get your DeWalt pressure washer back up and running.

Most Common Reasons Dewalt Pressure Washer Not Working

Most Common Reasons

No Water Flow

Blocked water inlet filter:
The water inlet filter is located at the end of the hose that connects to the pressure washer. If it is clogged, it will restrict water flow and prevent the pressure washer from working properly. To clean the filter, remove it from the hose and rinse it under running water.

Low water pressure:
If the water pressure at your home is low, it may not be enough to power the pressure washer. Check the water pressure at your faucet before using the pressure washer.

Damaged or kinked hose:
A damaged or kinked hose can also restrict water flow and prevent the pressure washer from working properly. Inspect the hose for damage and replace it if necessary.

Clogged nozzle:
The nozzle is the part of the pressure washer that directs the water stream. If it is clogged, it will reduce water flow and cause the pressure washer to spray weakly. To clean the nozzle, remove it from the pressure washer and soak it in a vinegar and water solution for several minutes.

No Power

Unplug the pressure washer and check the power cord for damage:
If the power cord is damaged, replace it with a new one.

Check the circuit breaker to make sure that it is turned on:

Try resetting the pressure washer by unplugging it for 30 seconds and then plugging it back in:

If the pressure washer still does not work, there may be a problem with the motor:
In this case, you will need to take the pressure washer to a qualified technician for repairs.

High Pressure/Nozzle Leaks

Check the pressure regulator to make sure that it is set to the correct pressure:
If the pressure is too high, it can damage the pressure washer and cause leaks.

Inspect the nozzles for damage:
If the nozzles are damaged, they will leak water. To fix this, you can try tightening the nozzle or replacing it with a new one.

Check the o-rings for damage or wear:
If the o-rings are damaged or worn, they will leak water. To fix this, you can try replacing the o-rings.

Other Problems

The pressure washer is making strange noises:
This could be a sign of a problem with the motor or pump. In this case, you will need to take the pressure washer to a qualified technician for repairs.

The pressure washer is not starting:
This could be a sign of a problem with the starter motor or the battery. In this case, you will need to take the pressure washer to a qualified technician for repairs.

How to Troubleshoot: DeWalt Pressure Washer Not Working

Your DeWalt pressure washer is a powerful tool that can help you clean your home, car, and other outdoor surfaces. However, like any other machine, it can occasionally malfunction. If your DeWalt pressure washer is not working, there are a few things you can check to troubleshoot the problem.

Step 1: Check the power

The first thing you should check is to make sure that the pressure washer is plugged in and turned on. If it is not plugged in, plug it in and turn it on. If it is plugged in and turned on, but the pressure washer is still not working, move on to the next step.

Step 2: Check the water supply

Make sure that there is water in the pressure washer’s tank. If there is no water in the tank, fill it up. If there is water in the tank, but the pressure washer is still not working, move on to the next step.

Step 3: Check the hose

Inspect the hose for any kinks or leaks. If there are any kinks or leaks, straighten out the hose or repair the leak. If the hose is not kinked or leaking, move on to the next step.

Step 4: Check the spray gun

Inspect the spray gun for any clogs. If the spray gun is clogged, clean it out. If the spray gun is not clogged, move on to the next step.

Step 5: Check the pressure washer pump

If you have checked all of the above and your DeWalt pressure washer is still not working, the problem may be with the pressure washer pump. If you are not comfortable troubleshooting a pressure washer pump, you should take it to a qualified technician for repairs.

Conclusion

By following these steps, you can troubleshoot most common problems with your DeWalt pressure washer. If you are unable to fix the problem yourself, you should take it to a qualified technician for repairs.

Also Read: Dewalt Pressure Washer Soap Injector Not Working