Earthwise 16 Corded Chainsaw Not Working: [Reasons + Fixed]

As a chainsaw repair professional
I understand the frustration and inconvenience that arises when your Earthwise 16-inch corded chainsaw suddenly stops working. A malfunctioning chainsaw can disrupt your plans and delay essential tasks
emphasizing the critical need for a swift and accurate diagnosis to restore its functionality. Whether you rely on your chainsaw for professional use or personal projects
encountering issues with its operation can be highly disruptive. In this troubleshooting guide
we will address the common problem of an
providing step-by-step solutions to help you quickly identify and resolve the issue. By following these troubleshooting steps
you can regain the full functionality of your chainsaw and minimize any downtime
ensuring that it remains a reliable and efficient tool for your cutting needs.

Most Common Reasons Of Earthwise 16 Corded Chainsaw Not Working

1. Insufficient Oil

The most common reason for a chainsaw not working is insufficient oil. The oil lubricates the chain and bar, and without it, the chain will quickly wear out and become damaged. To check the oil level, remove the oil cap and look inside the tank. The oil level should be between the full and add marks. If the oil level is low, add more oil until it reaches the full mark.

2. Clogged Air Filter

A clogged air filter can restrict the flow of air to the carburetor, which can cause the chainsaw to run poorly or not at all. To check the air filter, remove it from the chainsaw and inspect it for dirt and debris. If the air filter is dirty, clean it with a clean cloth or replace it with a new one.

3. Dirty Spark Plug

A dirty spark plug can prevent the chainsaw from starting or running properly. To check the spark plug, remove it from the chainsaw and inspect it for deposits. If the spark plug is dirty, clean it with a wire brush or replace it with a new one.

4. Bad Carburetor

A bad carburetor can cause the chainsaw to run poorly or not at all. To check the carburetor, remove it from the chainsaw and inspect it for damage. If the carburetor is damaged, it will need to be repaired or replaced.

5. Bad Spark Plug Wire

A bad spark plug wire can prevent the spark plug from firing, which can cause the chainsaw to not start or run properly. To check the spark plug wire, inspect it for damage. If the spark plug wire is damaged, it will need to be replaced.

6. Bad Ignition Switch

A bad ignition switch can prevent the chainsaw from starting or running properly. To check the ignition switch, inspect it for damage. If the ignition switch is damaged, it will need to be replaced.

7. Bad Starter Rope

A bad starter rope can prevent the chainsaw from starting. To check the starter rope, inspect it for damage. If the starter rope is damaged, it will need to be replaced.

How to Troubleshoot: Earthwise 16 Corded Chainsaw Not Working

Symptoms

There are a few different symptoms that may indicate that your Earthwise 16 corded chainsaw is not working properly. These include:

The chainsaw will not start
The chainsaw starts but dies immediately
The chainsaw makes a loud noise when it starts
The chainsaw cuts slowly or unevenly
The chainsaw is difficult to control

Troubleshooting

If your Earthwise 16 corded chainsaw is not working properly, you can troubleshoot the problem by following these steps:

1. Check the spark plug. The spark plug is a critical component of your chainsaw, and if it is not working properly, the chainsaw will not start. To check the spark plug, remove it from the chainsaw and inspect it for damage. The spark plug should be clean and dry, and the electrodes should be free of corrosion. If the spark plug is damaged, replace it with a new one.
2. Check the air filter. The air filter helps to keep dirt and debris out of the carburetor, and if it is dirty, it can cause the chainsaw to start and run poorly. To check the air filter, remove it from the chainsaw and inspect it for dirt and debris. If the air filter is dirty, clean it with a dry cloth or replace it with a new one.
3. Check the carburetor. The carburetor is responsible for mixing the fuel and air in the correct proportions, and if it is not adjusted properly, the chainsaw may not start or run properly. To check the carburetor, you will need to remove the air filter and the carburetor cover. Then, you can use a carburetor adjustment tool to adjust the carburetor’s idle speed and fuel mixture.
4. Check the fuel line. The fuel line connects the fuel tank to the carburetor, and if it is damaged or clogged, the chainsaw may not start or run properly. To check the fuel line, inspect it for damage or leaks. If the fuel line is damaged, replace it with a new one. If the fuel line is clogged, clean it with a wire brush or replace it with a new one.
5. Check the engine. If the chainsaw is still not working after you have checked the spark plug, air filter, carburetor, and fuel line, the problem may be with the engine itself. To troubleshoot the engine, you will need to remove the spark plug and cylinder head. Then, you can inspect the piston, valves, and cylinder for damage. If any of these components are damaged, they will need to be repaired or replaced.

Preventative Maintenance

The best way to prevent problems with your Earthwise 16 corded chainsaw is to perform regular preventative maintenance. This includes:

Cleaning the chainsaw after each use
Replacing the spark plug and air filter every year
Adjusting the carburetor every year
Cleaning the fuel line every year
Checking the engine every year

By following these simple steps, you can help to keep your Earthwise 16 corded chainsaw running smoothly and efficiently for years to come.

Also Check: Earthwise Chainsaw Oiler Not Working

FAQs: Earthwise 16 Corded Chainsaw Not Working

Why is my Earthwise 16 corded chainsaw not working?

There are a few possible reasons why your Earthwise 16 corded chainsaw might not be working. Here are some of the most common causes and solutions:

The chainsaw is not plugged in properly. Make sure that the chainsaw is plugged into an outlet that is working and that the plug is securely inserted into the outlet.
The chainsaw is not getting enough power. If the chainsaw is plugged into an outlet that is not providing enough power, the chainsaw will not work properly. Try plugging the chainsaw into a different outlet or using a power strip.
The chainsaw is not starting. If the chainsaw is not starting, there could be a problem with the spark plug. Try replacing the spark plug and see if that fixes the problem.
The chainsaw is overheating. If the chainsaw is overheating, it will shut down automatically to prevent damage. Allow the chainsaw to cool down before trying to use it again.
The chainsaw is out of gas. If the chainsaw is out of gas, it will not work. Make sure that the chainsaw is filled with gas and that the gas cap is securely closed.

How do I troubleshoot my Earthwise 16 corded chainsaw?

If your Earthwise 16 corded chainsaw is not working, here are some steps you can take to troubleshoot the problem:

1. Check the power cord. Make sure that the power cord is plugged into an outlet that is working and that the plug is securely inserted into the outlet.
2. Check the spark plug. If the chainsaw is not starting, there could be a problem with the spark plug. Try replacing the spark plug and see if that fixes the problem.
3. Check the air filter. If the chainsaw is running but not cutting properly, the air filter may be dirty. Clean the air filter and see if that improves the chainsaw’s performance.
4. Check the chain tension. If the chain is too loose or too tight, it will not cut properly. Adjust the chain tension and see if that fixes the problem.
5. Check the bar oil level. If the bar oil level is low, the chain will not be lubricated properly and it will wear out quickly. Add bar oil to the chainsaw and see if that fixes the problem.

How do I maintain my Earthwise 16 corded chainsaw?

To keep your Earthwise 16 corded chainsaw in good working order, it is important to maintain it regularly. Here are some tips for maintaining your chainsaw:

Inspect the chainsaw before each use. Check for any damage to the chainsaw, such as cracks in the housing or loose screws. Make sure that the chain is sharp and that the bar oil level is adequate.
Clean the chainsaw after each use. Remove any dirt or debris from the chainsaw, especially the chain and bar. Clean the air filter and replace it if it is dirty.
Sharpen the chain regularly. A dull chain will not cut properly and it will wear out quickly. Sharpen the chain according to the manufacturer’s instructions.
Oil the bar regularly. The bar oil lubricates the chain and helps to prevent it from wearing out. Add bar oil to the chainsaw according to the manufacturer’s instructions.

What are the safety precautions for using an Earthwise 16 corded chainsaw?

When using an Earthwise 16 corded chainsaw, it is important to take precautions to protect yourself from injury. Here are some safety precautions to follow:

Wear proper safety gear. This includes a hard hat, safety glasses, ear protection, gloves, and a chainsaw chaps.
Read the owner’s manual. The owner’s manual contains important safety information and instructions for operating the chainsaw.
Be aware of your surroundings. Make sure that you have a clear work area and that there are no people or objects in the path of the chainsaw.
Start the chainsaw carefully. Hold the chainsaw with both hands and pull the starter rope slowly until the engine starts.
Operate the chainsaw carefully. Do not overreach or cut above your head. Keep the chain away from your body and other people.
Stop the chainsaw immediately if you lose control of it. Let go of the trigger and allow the chain to come to a complete stop before setting the chainsaw down.

Where can I find replacement parts for my Earthwise 16 corded chainsaw?