Earthwise 16 Corded Chainsaw Tool-Less Tensioning Not Working: [Solved]

As a chainsaw repair professional, I’ve seen my fair share of problems with Earthwise 16-inch corded chainsaws. One of the most common issues is the tool-less tensioning system not working properly. This can be a major inconvenience for chainsaw owners, as it can make it difficult to keep the chain properly tensioned. In this guide, I’ll walk you through the steps to troubleshoot and resolve this issue. By the end of this guide, you’ll be able to quickly diagnose and resolve the problem, so you can get back to using your chainsaw without any further trouble.

Here are some of the signs that the tool-less tensioning system on your Earthwise 16-inch corded chainsaw is not working properly:

The chain is loose and/or slipping.
The chain is difficult to turn.
The chain is making a loud noise.
The chain is jumping off the guide bar.

If you’re experiencing any of these problems, it’s important to troubleshoot the issue and resolve it as soon as possible. To learn how to do this, keep reading.

Most Common Reasons Of Earthwise 16 Corded Chainsaw Tool-Less Tensioning Not Working

Most Common Reasons Of Earthwise 16 Corded Chainsaw Tool-Less Tensioning Not Working

1. The chain is too loose

If the chain is too loose, it will not be able to stay tight on the bar and will come off easily. To tighten the chain, use the tool-less tensioning lever to turn the tensioning screw clockwise.

2. The chain is too tight

If the chain is too tight, it will be difficult to operate the chainsaw and the chain may come off. To loosen the chain, use the tool-less tensioning lever to turn the tensioning screw counterclockwise.

3. The bar is bent

If the bar is bent, it will not be able to hold the chain properly and the chain will come off. To check if the bar is bent, sight down the bar and look for any bends. If the bar is bent, you will need to replace it.

4. The chain guide is damaged

The chain guide is a metal strip that helps to guide the chain along the bar. If the chain guide is damaged, it will not be able to do its job properly and the chain may come off. To check if the chain guide is damaged, look for any cracks or bends. If the chain guide is damaged, you will need to replace it.

5. The chain oiler is not working properly

The chain oiler is a small pump that lubricates the chain as it moves along the bar. If the chain oiler is not working properly, the chain will not be lubricated properly and it will wear out faster. To check if the chain oiler is working properly, look for any leaks. If the chain oiler is leaking, you will need to replace it.

How to Troubleshoot: Earthwise 16 Corded Chainsaw Tool-less Tensioning Not Working

Symptoms

The chain is loose on the bar.
The chain is difficult to turn by hand.
The chain jumps off the bar while cutting.

Causes

The chain tensioner is not adjusted properly.
The chain oiler is not working properly.
The bar is worn out.
The chain is worn out.

Solutions

Adjust the chain tensioner. The chain tensioner is located on the side of the chainsaw. To adjust it, turn the knob clockwise to tighten the chain or counterclockwise to loosen it.
Clean the chain oiler. The chain oiler is located on the side of the chainsaw. To clean it, remove the cover and use a small brush to clean out any debris.
Replace the bar. If the bar is worn out, it will need to be replaced. To replace the bar, remove the old bar and install the new one.
Replace the chain. If the chain is worn out, it will need to be replaced. To replace the chain, remove the old chain and install the new one.

Prevention

Regularly check the chain tension and adjust it as needed.
Keep the chain oiler clean and full.
Replace the bar and chain when they are worn out.

By following these tips, you can help prevent problems with your Earthwise 16 corded chainsaw tool-less tensioning.

Also Check: Earthwise 16 Corded Chainsaw Tooless Tensioning Not Working

FAQs About Earthwise 16 Corded Chainsaw Tool-less Tensioning Not Working

Why is the tool-less tensioning on my Earthwise 16 corded chainsaw not working?

There are a few possible reasons why the tool-less tensioning on your Earthwise 16 corded chainsaw may not be working.

The chain is too tight. If the chain is too tight, it will not be able to move freely on the bar, and the tensioning mechanism will not be able to work properly. To check if the chain is too tight, try to move it back and forth on the bar. If it is difficult to move, loosen the tensioning screw until the chain moves more freely.
The chain is too loose. If the chain is too loose, it will not be able to stay on the bar, and the tensioning mechanism will not be able to work properly. To check if the chain is too loose, try to pull on the chain. If it comes off the bar easily, tighten the tensioning screw until the chain is snug against the bar.
The tensioning mechanism is damaged. If the tensioning mechanism is damaged, it will not be able to work properly. To check if the tensioning mechanism is damaged, try to turn the tensioning screw. If it does not turn smoothly, or if it feels like it is binding, the mechanism may be damaged and will need to be replaced.

How do I fix the tool-less tensioning on my Earthwise 16 corded chainsaw?

If the tool-less tensioning on your Earthwise 16 corded chainsaw is not working, you can try the following steps to fix it:

1. Check the chain tension. Make sure that the chain is not too tight or too loose. If it is too tight, loosen the tensioning screw until the chain moves more freely. If it is too loose, tighten the tensioning screw until the chain is snug against the bar.
2. Clean the tensioning mechanism. Use a clean cloth to wipe away any dirt or debris from the tensioning mechanism. This will help to ensure that the mechanism is working properly.
3. Lubricate the tensioning mechanism. Apply a small amount of light oil to the tensioning mechanism. This will help to keep the mechanism moving smoothly and prevent it from becoming damaged.
4. Replace the tensioning mechanism. If the tensioning mechanism is damaged, you will need to replace it. You can purchase a replacement tensioning mechanism from your local hardware store or online retailer.

What are the symptoms of a tool-less tensioning system that is not working properly?

There are a few symptoms that may indicate that the tool-less tensioning system on your Earthwise 16 corded chainsaw is not working properly.

The chain is too tight or too loose. If the chain is too tight, it will be difficult to move back and forth on the bar. If the chain is too loose, it will come off the bar easily.
The chain is difficult to start. If the chain is too tight, it will be difficult to start the chainsaw.
The chain is noisy. If the chain is too tight, it will make a lot of noise when it is running.
The chain is not cutting properly. If the chain is too tight, it will not be able to cut through wood properly.

What can I do to prevent the tool-less tensioning system on my Earthwise 16 corded chainsaw from breaking down?

There are a few things you can do to help prevent the tool-less tensioning system on your Earthwise 16 corded chainsaw from breaking down.

Keep the chain properly tensioned. Make sure that the chain is not too tight or too loose. If the chain is too tight, it will be difficult to move back and forth on the bar and the tensioning mechanism will be put under unnecessary stress. If the chain is too loose, it will come off the bar easily and the tensioning mechanism will not be able to work properly.
Clean the tensioning mechanism regularly. Use a clean cloth to wipe away any dirt or debris from the tensioning mechanism. This will help to prevent the mechanism from becoming damaged.
Lubricate the tensioning mechanism regularly. Apply a small amount of light oil to the tensioning mechanism. This will help to keep the mechanism moving smoothly and prevent it from becoming damaged.

What are the replacement parts for the tool-less tensioning system on my