Earthwise Chainsaw Oiler Not Working: [Proven Ways To Fix]

As a chainsaw owner, there are few things more frustrating than having your oiler stop working. Not only can it lead to damage to your saw, but it can also be a safety hazard. If your chainsaw isn’t properly lubricated, it can overheat and start to smoke, which can be dangerous.

In this guide, I’ll walk you through the steps to troubleshoot a chainsaw oiler that isn’t working. I’ll cover everything from common causes of the problem to specific troubleshooting steps. By the end of this guide, you’ll be able to quickly diagnose and resolve the issue, so you can get back to using your chainsaw without any hassle.

Most Common Reasons Of Earthwise Chainsaw Oiler Not Working

Most Common Reasons Of Earthwise Chainsaw Oiler Not Working

1. Oiler Hose Is Clogged

The most common reason for an Earthwise chainsaw oiler not working is a clogged oiler hose. This can be caused by dirt, sawdust, or other debris getting into the hose and blocking the flow of oil. To fix this problem, you will need to clean the oiler hose.

2. Oiler Pump Is Not Working

Another common reason for an Earthwise chainsaw oiler not working is a faulty oiler pump. The oiler pump is responsible for pumping oil from the reservoir to the chain. If the pump is not working properly, it will not be able to deliver oil to the chain, and the chain will not be properly lubricated. To fix this problem, you will need to replace the oiler pump.

3. Oiler Reservoir Is Empty

A third common reason for an Earthwise chainsaw oiler not working is an empty oiler reservoir. If the oiler reservoir is empty, the oiler will not be able to deliver oil to the chain. To fix this problem, you will need to add oil to the reservoir.

4. Oiler Is Not Adjusted Properly

Finally, an Earthwise chainsaw oiler may not be working properly if it is not adjusted properly. The oiler should be adjusted so that it delivers a small amount of oil to the chain each time the saw is operated. If the oiler is adjusted too high, it will waste oil and could cause the chain to become too oily. If the oiler is adjusted too low, it will not provide enough lubrication to the chain, and the chain could become damaged. To fix this problem, you will need to adjust the oiler according to the manufacturer’s instructions.

How to Troubleshoot: Earthwise Chainsaw Oiler Not Working

Symptoms of a Chainsaw Oiler Not Working

There are a few signs that your chainsaw oiler may not be working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain and bar.
The oiler is leaking oil, which can be a fire hazard.
The oiler is making a strange noise, which could indicate a problem with the pump or motor.

Troubleshooting a Chainsaw Oiler

If you suspect that your chainsaw oiler is not working properly, you can troubleshoot the problem by following these steps:

1. Check the oil level. The first thing you should do is check the oil level in the oiler reservoir. If the oil level is low, fill the reservoir with the recommended type of oil.
2. Check the oil filter. The oil filter is located on the oiler pump. Remove the filter and inspect it for signs of damage or blockage. If the filter is dirty or clogged, replace it with a new one.
3. Check the oil line. The oil line connects the oiler pump to the bar and chain. Inspect the oil line for leaks or damage. If you find a leak, repair or replace the oil line.
4. Check the oil pump. The oil pump is responsible for pumping oil to the bar and chain. If the pump is not working properly, you may hear a strange noise or the chain may not be lubricated properly. To test the oil pump, start the chainsaw and listen for the pump to run. If you do not hear the pump running, or if the chain is not being lubricated properly, the pump may need to be replaced.

How to Prevent Chainsaw Oiler Problems

You can help prevent chainsaw oiler problems by following these tips:

Use the correct type of oil. Make sure to use the type of oil that is recommended by the chainsaw manufacturer.
Keep the oil level topped off. The oil level should be between the full and add marks on the oiler reservoir.
Change the oil filter regularly. The oil filter should be changed every 25 to 50 hours of operation.
Inspect the oil line regularly. Inspect the oil line for leaks or damage and repair or replace it as needed.
Maintain the oil pump. The oil pump should be lubricated regularly and the O-rings should be replaced as needed.

By following these tips, you can help keep your chainsaw oiler working properly and prevent costly repairs.

Also Check: Echo 370 Chainsaw Chain Tensioner Not Working

FAQs: Earthwise Chainsaw Oiler Not Working

Why is my Earthwise chainsaw oiler not working?

There are a few possible reasons why your Earthwise chainsaw oiler may not be working.

The oiler may be clogged. If the oiler is clogged, it will not be able to properly deliver oil to the chain. To check if the oiler is clogged, remove the oiler cover and inspect the oiler tube. If the tube is clogged, you can clean it with a small brush or needle.
The oiler may be empty. If the oiler is empty, it will not be able to deliver oil to the chain. To check if the oiler is empty, remove the oiler cover and look inside the oiler reservoir. If the reservoir is empty, you will need to add oil to the chainsaw.
The oiler may be turned off. If the oiler is turned off, it will not be able to deliver oil to the chain. To check if the oiler is turned on, look for the oiler switch on the chainsaw. If the switch is in the off position, turn it to the on position.
The oiler may be defective. If the oiler is defective, it will not be able to properly deliver oil to the chain. If you suspect that the oiler is defective, you will need to contact Earthwise customer service for assistance.

How do I fix my Earthwise chainsaw oiler?

If your Earthwise chainsaw oiler is not working, you can try the following troubleshooting steps:

1. Check if the oiler is clogged. Remove the oiler cover and inspect the oiler tube. If the tube is clogged, you can clean it with a small brush or needle.
2. Check if the oiler is empty. Remove the oiler cover and look inside the oiler reservoir. If the reservoir is empty, you will need to add oil to the chainsaw.
3. Check if the oiler is turned on. Look for the oiler switch on the chainsaw. If the switch is in the off position, turn it to the on position.
4. Check if the oiler is defective. If you suspect that the oiler is defective, you will need to contact Earthwise customer service for assistance.

How often should I oil my Earthwise chainsaw?

You should oil your Earthwise chainsaw every time you use it. To oil the chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover.
3. Add oil to the oiler reservoir until the oil level is just below the fill line.
4. Replace the oiler cover.

What type of oil should I use for my Earthwise chainsaw?

You should use a high-quality, non-detergent, 2-cycle oil for your Earthwise chainsaw. Avoid using regular motor oil, as it can damage the chainsaw’s engine.

Where can I find replacement oilers for my Earthwise chainsaw?

You can find replacement oilers for your Earthwise chainsaw at most home improvement stores and online retailers.