Electric Hedge Trimmer Blades Won T Move [How To Fix It]

Is your electric hedge trimmer giving you a headache by refusing to budge It’s a frustrating scenario
especially when you’re in the midst of tackling your yard maintenance. The inability of the blades to move can bring your work to a grinding halt. But fear not! Understanding the common culprits behind this issue and knowing how to troubleshoot can save you from this predicament. Let’s dive into the troubleshooting process and get those blades back in action.

Reasons Why Electric Hedge Trimmer Blades Won T Move

Electric Hedge Trimmer Blades Won’t Move: Causes

The trimmer is not plugged in or the power switch is turned off:
This is the most common cause of a hedge trimmer not working. Make sure that the trimmer is plugged in and that the power switch is turned on.

The trimmer’s battery is dead:
If the trimmer is battery-powered, check to make sure that the battery is charged.

The trimmer’s blades are jammed:
If the trimmer’s blades are jammed, they will not be able to move. To unjam the blades, turn off the trimmer and carefully use a screwdriver or other tool to pry them apart.

The trimmer’s drive belt is broken:
If the trimmer’s drive belt is broken, it will not be able to turn the blades. To replace the drive belt, you will need to remove the trimmer’s housing and locate the drive belt. Once you have located the drive belt, you can remove it and install a new one.

The trimmer’s motor is broken:
If the trimmer’s motor is broken, it will not be able to turn the blades. To determine if the motor is broken, you will need to remove the trimmer’s housing and inspect the motor. If the motor is burnt or damaged, it will need to be replaced.

How to Troubleshoot: Electric Hedge Trimmer Blades Won’t Move

Your electric hedge trimmer is a valuable tool for keeping your hedges neat and trimmed. But what happens when the blades stop moving? This can be a frustrating problem, but it’s usually easy to fix. In this article, we’ll walk you through the steps to troubleshoot a hedge trimmer that won’t move.

Step 1: Check the power cord

The first thing you need to do is check the power cord to make sure it’s plugged in properly. If it’s not plugged in, plug it in and try turning on the trimmer again. If the trimmer still won’t move, move on to the next step.

Step 2: Check the switch

The next thing you need to check is the switch. Make sure it’s turned to the On position. If it is, move on to the next step.

Step 3: Check the blade

The next thing you need to check is the blade. Make sure it’s not stuck or jammed. If it is, you can try to free it by using a small screwdriver or other tool. If you can’t free the blade, you may need to replace it.

Step 4: Check the motor

If the blade is not stuck or jammed, and the switch is turned to the On position, then the problem may be with the motor. To check the motor, you can try to start it by hand. If the motor doesn’t start, you may need to have it repaired or replaced.

Step 5: Clean the trimmer

If you’ve checked all of the above and the trimmer still won’t move, then you may need to clean it. To clean the trimmer, you can use a soft cloth to wipe down the blades and the housing. You can also use a small brush to clean out any debris that may be stuck in the trimmer.

Conclusion

Hopefully, this article has helped you troubleshoot your electric hedge trimmer. If you’ve tried all of the above and the trimmer still won’t move, then you may need to take it to a professional for repairs.

Also Read: Gas Hedge Trimmer Keeps Turning Off

FAQs: Electric Hedge Trimmer Blades Won’t Move

Why won’t my electric hedge trimmer blades move?

There are a few possible reasons why your electric hedge trimmer blades might not be moving. Here are some of the most common:

The trimmer is not plugged in properly: Make sure that the trimmer is plugged into an outlet that is working and that the plug is securely inserted into the outlet.

The trimmer’s switch is turned off: Check to make sure that the switch is turned on.

The trimmer’s blades are jammed: If the blades are jammed, you will need to unjam them before you can use the trimmer.

The trimmer’s motor is not working: If the motor is not working, you will need to have the trimmer repaired or replaced.

How do I unjam my electric hedge trimmer blades?

To unjam your electric hedge trimmer blades, you will need to:

1. Turn off the trimmer and unplug it from the outlet.
2. Use a pair of pliers to grip the blade guard and carefully pry it open.
3. Use a screwdriver to loosen the screws that hold the blades in place.
4. Use a brush to clean any debris that is stuck between the blades.
5. Reattach the blades and tighten the screws.
6. Turn on the trimmer and test the blades to make sure that they are moving freely.

How do I sharpen my electric hedge trimmer blades?

To sharpen your electric hedge trimmer blades, you will need to:

1. Turn off the trimmer and unplug it from the outlet.
2. Use a file to sharpen the blades on both sides.
3. Be careful not to over-sharpen the blades, as this could damage them.
4. Test the blades to make sure that they are sharp.

How do I maintain my electric hedge trimmer?

To maintain your electric hedge trimmer, you will need to:

Clean the trimmer after each use: This will help to prevent the buildup of debris, which can damage the trimmer.

Oil the trimmer regularly: This will help to keep the moving parts lubricated and prevent them from wearing out.

Inspect the trimmer for damage before each use: This will help to identify any problems that need to be repaired or replaced.

Follow the manufacturer’s instructions for maintenance: This will help to ensure that your trimmer is properly maintained and that it lasts for many years.

What should I do if my electric hedge trimmer blades are still not moving?

If your electric hedge trimmer blades are still not moving after you have tried the troubleshooting tips above, you should contact a qualified technician for assistance.