Electric Pressure Washer Not Working: [Reasons + Fixed]

Electric pressure washers are a powerful and versatile tool that can be used for a variety of cleaning tasks around the home and garden. However, like any other tool, they can sometimes malfunction. If your electric pressure washer is not working, it can be a frustrating and inconvenient experience. However, by following this troubleshooting guide, you can quickly diagnose and resolve the problem so that you can get back to using your pressure washer as soon as possible.

In this guide, we will discuss the most common reasons why electric pressure washers stop working, as well as the steps you can take to fix them. We will also provide tips on how to prevent future problems.

Before you begin troubleshooting, make sure that you have read and understood the owner’s manual for your pressure washer. This will provide you with important safety information and instructions on how to operate and maintain your tool properly.

Most Common Reasons Electric Pressure Washer Not Working

Most Common Reasons

No Power

The power cord is not plugged in or is not plugged in all the way:

The circuit breaker is tripped:

The pressure washer is not getting enough power from the outlet:

Water Flow Problems

The water supply hose is not connected to the pressure washer or is not connected tightly:

The water supply hose is kinked or blocked:

The pressure washer pump is clogged:

The pressure washer nozzle is clogged:

Pressure Problems

The pressure washer is not generating enough pressure:

The pressure washer is generating too much pressure:

Other Problems

The pressure washer is leaking:

The pressure washer is making strange noises:

The pressure washer is not starting:

How to Troubleshoot: Electric Pressure Washer Not Working

Your electric pressure washer is a powerful tool that can make quick work of cleaning a variety of surfaces, from your driveway to your deck. But what happens when your pressure washer stops working? Don’t panic—there are a few simple troubleshooting steps you can take to get your pressure washer up and running again.

Step 1: Check the power

The first thing you should do is check to make sure that your pressure washer is plugged in and turned on. If it is, try resetting the circuit breaker. If that doesn’t work, you may need to replace the power cord or the outlet.

Step 2: Check the water supply

Make sure that your pressure washer is connected to a water source and that the water is turned on. If the water is turned on, try turning off the pressure washer and then turning it back on. If that doesn’t work, you may need to replace the water pump.

Step 3: Check the air filter

The air filter on your pressure washer helps to keep dirt and debris from getting into the engine. If the air filter is clogged, it can prevent the engine from running properly. To check the air filter, remove it from the pressure washer and inspect it for dirt and debris. If the air filter is clogged, clean it or replace it with a new one.

Step 4: Check the oil level

The oil level in your pressure washer should be checked regularly and topped off as needed. If the oil level is too low, it can cause the engine to overheat and damage the seals. To check the oil level, remove the oil dipstick and wipe it clean. Then, reinsert the dipstick and look at the level of the oil. If the oil level is low, add oil until it reaches the full mark on the dipstick.

Step 5: Check the spark plug

The spark plug in your pressure washer helps to ignite the fuel mixture in the engine. If the spark plug is damaged or fouled, it can prevent the engine from starting or running properly. To check the spark plug, remove it from the engine and inspect it for damage. If the spark plug is damaged, replace it with a new one.

Step 6: Inspect the fuel system

The fuel system on your pressure washer includes the fuel tank, fuel line, and fuel filter. If there is a problem with any of these components, it can prevent the engine from starting or running properly. To inspect the fuel system, check for leaks in the fuel tank and fuel line. Also, check the fuel filter for dirt and debris. If you find a leak or a dirty fuel filter, repair or replace the damaged component.

Step 7: Test the pressure washer

Once you have completed all of the troubleshooting steps, test the pressure washer to make sure that it is working properly. Turn on the pressure washer and let it run for a few minutes. The pressure washer should build up pressure and spray water at a high velocity. If the pressure washer is not working properly, you may need to take it to a qualified technician for further diagnosis and repair.

Conclusion

By following these troubleshooting steps, you can usually fix a non-working electric pressure washer yourself. However, if you are unable to fix the problem, you may need to take the pressure washer to a qualified technician for further diagnosis and repair.

Also Read: Greenworks 2000 Psi Pressure Washer Soap Not Working