Electric Pressure Washer Pump Not Working [With Solution]

A Troubleshooting Guide

Your electric pressure washer is one of the most valuable tools in your home improvement arsenal. It can help you clean everything from your driveway to your siding to your car. But when the pump doesn’t work, it can be a major inconvenience.

In this guide, we’ll walk you through the steps to troubleshoot a broken pressure washer pump. We’ll cover common causes of pump failure, as well as how to diagnose and fix the problem. By the end of this guide, you’ll be able to get your pressure washer up and running again in no time.

Hook

Imagine this you’re ready to power wash your dirty driveway, but when you flip the switch, nothing happens. Your pressure washer isn’t working!

This is a frustrating problem, but it’s one that you can usually fix yourself with a little troubleshooting. In this guide, I’ll walk you through the steps to identify and fix the problem with your pressure washer pump. So don’t despair, just keep reading and you’ll be back to blasting away dirt in no time.

Reasons Why Electric Pressure Washer Pump Not Working

No Power to the Pump

The pump may not be getting power from the outlet.
The pump’s power cord may be damaged.
The pump’s motor may be burned out.

Clogged Inlet Filter

The inlet filter may be clogged with dirt or debris, preventing water from flowing to the pump.
To clean the inlet filter, remove it from the pump and rinse it under running water.

Clogged Outlet Hose

The outlet hose may be clogged with dirt or debris, preventing water from flowing out of the pump.
To clean the outlet hose, disconnect it from the pump and rinse it under running water.

Bad Pressure Washer Pump

The pump may be damaged and need to be replaced.

How to Troubleshoot: Electric Pressure Washer Pump Not Working

Your electric pressure washer is a powerful tool that can make quick work of cleaning your home, car, or other outdoor surfaces. But what happens when the pump stops working? This can be a frustrating problem, but it’s usually easy to fix.

In this article, we’ll walk you through the steps of troubleshooting a pressure washer pump that’s not working. We’ll cover everything from common causes of problems to specific troubleshooting tips. By the end of this article, you’ll be able to get your pressure washer back up and running in no time.

Common Causes of Pressure Washer Pump Problems

There are a number of different things that can cause a pressure washer pump to stop working. Here are some of the most common causes:

Low or dirty oil:

The pump in your pressure washer needs oil to lubricate the moving parts. If the oil level is low, or if the oil is dirty, it can cause the pump to overheat and fail.

Clogged filter:

The filter in your pressure washer helps to keep dirt and debris from entering the pump. If the filter is clogged, it can restrict the flow of water to the pump, causing it to overheat and fail.

Damaged impeller:

The impeller is the part of the pump that actually moves the water. If the impeller is damaged, it can’t move water properly, which will cause the pump to overheat and fail.

Burned out motor:

The motor in your pressure washer provides the power to run the pump. If the motor burns out, the pump won’t be able to work at all.

Troubleshooting Tips

If your pressure washer pump isn’t working, there are a few things you can check to try to troubleshoot the problem. Here are some tips:

Check the oil level:

First, check the oil level in the pump. If the oil level is low, add oil until it reaches the full mark on the dipstick.

Clean the filter:

Next, clean the filter. To do this, remove the filter from the pump and rinse it under warm water. Be sure to dry the filter completely before reinstalling it.

Inspect the impeller:

If the filter is clean and the oil level is correct, the next step is to inspect the impeller. Look for any signs of damage, such as cracks or chips. If the impeller is damaged, it will need to be replaced.

Check the motor:

Finally, check the motor. If the motor is burned out, it will need to be replaced.

Conclusion

Troubleshooting a pressure washer pump that’s not working can be a frustrating experience, but it’s usually easy to fix. By following the tips in this article, you can get your pressure washer back up and running in no time.

If you’re having trouble troubleshooting the problem yourself, you can always take your pressure washer to a qualified repair shop. A professional can diagnose the problem and make the necessary repairs quickly and efficiently.

Also Read: Electric Ryobi Pressure Washer Soap Not Working

FAQs: Electric Pressure Washer Pump Not Working

Why is my electric pressure washer pump not working?

There are a few possible reasons why your electric pressure washer pump might not be working. Here are some of the most common causes:

The pump is not getting enough power: Make sure that the pump is plugged into an outlet that is providing the correct voltage. If the outlet is not providing enough power, the pump will not be able to start.

The pump is clogged: The pump can become clogged with dirt, debris, or other materials. This can prevent the pump from pumping water properly. To clean the pump, you can use a degreaser or a cleaning solution designed for pressure washers.

The pump is damaged: The pump can be damaged if it is run dry or if it is subjected to too much pressure. If the pump is damaged, it will need to be replaced.

How do I fix an electric pressure washer pump that is not working?

Once you have determined the cause of the problem, you can take steps to fix the pump. Here are some troubleshooting tips:

Check the power supply: Make sure that the pump is plugged into an outlet that is providing the correct voltage.

Clean the pump: If the pump is clogged, you can clean it using a degreaser or a cleaning solution designed for pressure washers.

Replace the pump: If the pump is damaged, it will need to be replaced.

How can I prevent my electric pressure washer pump from failing?

There are a few things you can do to prevent your electric pressure washer pump from failing:

Use the pump properly: Do not run the pump dry and do not subject it to too much pressure.

Maintain the pump regularly: Clean the pump regularly and replace the seals and gaskets as needed.

Store the pump properly: When you are not using the pump, store it in a cool, dry place.

What are the signs of a bad electric pressure washer pump?

Here are some of the signs of a bad electric pressure washer pump:

The pump does not start when you turn it on.
The pump makes a loud noise when it is running.
The pump leaks water.
The pump does not produce enough pressure.

What is the average cost to replace an electric pressure washer pump?

The average cost to replace an electric pressure washer pump ranges from $50 to $100. The cost will vary depending on the size and type of pump.