Electric Pressure Washer Stopped Working [Easy Troubleshooting]

Electric pressure washers are a powerful tool that can make quick work of cleaning a variety of surfaces. But when they stop working, it can be a major inconvenience.

In this guide, I’ll walk you through the most common causes of electric pressure washer problems and how to fix them.

I’ll also provide some tips on how to prevent future problems.

So whether your pressure washer won’t start, isn’t producing enough pressure, or is leaking, I’m confident that you’ll be able to get it up and running again in no time.

Reasons Why Electric Pressure Washer Stopped Working

Reasons Why Electric Pressure Washer Stopped Working

No power: The most common reason for a pressure washer to stop working is a lack of power. This can be caused by a number of things, including a blown fuse, a tripped circuit breaker, or a faulty power cord.

Clogged hose: If the hose is clogged, it can prevent the water from flowing through the pressure washer and causing it to stop working.

Dirty filter: The filter on a pressure washer can become dirty over time, which can restrict the flow of water and cause the pressure washer to stop working.

Damaged pump: The pump is the heart of a pressure washer, and if it is damaged, it can prevent the pressure washer from working properly.

Leaking seals: The seals on a pressure washer can wear out over time, which can cause the pressure washer to leak water and stop working.

Faulty switch: The switch on a pressure washer can malfunction, which can prevent the pressure washer from turning on.

Incorrect water pressure: If the water pressure is too high or too low, it can damage the pressure washer and cause it to stop working.

How to Troubleshoot And Fix: electric pressure washer stopped working

Symptoms of a Pressure Washer that has Stopped Working

There are a few different symptoms that may indicate that your electric pressure washer has stopped working. These include:

The pressure washer won’t start
The pressure washer makes a strange noise
The pressure washer leaks water
The pressure washer doesn’t produce enough pressure

Troubleshooting a Pressure Washer that has Stopped Working

If your pressure washer has stopped working, there are a few things you can check to troubleshoot the problem.

1. Check the power supply:
Make sure that the pressure washer is plugged in and that the power switch is turned on. If the pressure washer is still not working, try a different outlet.

2. Check the water supply:
Make sure that there is water in the pressure washer’s tank. If the tank is empty, fill it up with water. If the tank is full, check the water hose to make sure that it is not kinked or blocked.

3. Check the pump:
The pump is the heart of the pressure washer. If the pump is not working, the pressure washer will not produce any pressure. To check the pump, turn on the pressure washer and listen for the pump to start. If you don’t hear the pump running, the pump may be faulty. You can also try to manually start the pump by turning the pressure washer’s priming lever. If the pump does not start, it will need to be replaced.

4. Check the hoses:
The hoses on a pressure washer can become kinked or blocked, which can prevent the pressure washer from working properly. To check the hoses, inspect them for any damage. If the hoses are kinked or blocked, you will need to replace them.

5. Check the nozzle:
The nozzle is the part of the pressure washer that directs the water stream. If the nozzle is clogged, it can prevent the pressure washer from producing enough pressure. To check the nozzle, remove it from the pressure washer and clean it with a wire brush. If the nozzle is damaged, you will need to replace it.

Fixing a Pressure Washer that has Stopped Working

Once you have identified the problem with your pressure washer, you can fix it yourself or take it to a qualified repair technician. If you decide to fix the pressure washer yourself, you will need to purchase the necessary parts and tools. You can find these parts and tools at most hardware stores.

1. Replacing the power cord:
If the power cord is damaged, you will need to replace it. To do this, disconnect the power cord from the pressure washer and the outlet. Then, cut the old power cord off and strip the ends of the new power cord. Connect the new power cord to the pressure washer and the outlet.

2. Replacing the water hose:
If the water hose is damaged, you will need to replace it. To do this, disconnect the water hose from the pressure washer and the faucet. Then, cut the old water hose off and attach the new water hose.

3. Replacing the pump:
If the pump is faulty, you will need to replace it. To do this, disconnect the pump from the pressure washer. Then, remove the old pump and install the new pump.

4. Replacing the hoses:
If the hoses are kinked or blocked, you will need to replace them. To do this, disconnect the hoses from the pressure washer. Then, cut the old hoses off and attach the new hoses.

5. Replacing the nozzle:
If the nozzle is clogged, you will need to clean it. To do this, remove the nozzle from the pressure washer and clean it with a wire brush. If the nozzle is damaged, you will need to replace it.

Preventing Problems with Your Pressure Washer

There are a few things you can do to prevent problems with your pressure washer:

Use the pressure washer according to the manufacturer’s instructions:
This includes using the correct type of water, the correct pressure setting, and the correct nozzle.

Inspect the pressure washer regularly for any damage:
If you find any damage, repair it immediately.

Store the pressure washer in a cool, dry place:
This will help to prevent the formation of rust and corrosion.

Clean the pressure washer after each use:
This will help to prevent the build-up of dirt and debris, which can damage the pressure washer.

By following these tips, you can help to keep your pressure washer in

Also Read: Gas Pressure Washer Stopped Working

FAQs: Electric Pressure Washer Stopped Working

Why did my electric pressure washer stop working?

There are a few possible reasons why your electric pressure washer may have stopped working. Here are some of the most common causes:

The motor is overheating: If the motor is overheating, it will automatically shut down to prevent damage. This can happen if the pressure washer is used for too long at a high pressure, or if the air filter is clogged.

The pump is damaged: The pump is the heart of the pressure washer, and if it is damaged, the pressure washer will not be able to generate pressure. This can happen if the pump is run dry, or if there is a problem with the impeller.

The hose is kinked or damaged: If the hose is kinked or damaged, it can restrict the flow of water and cause the pressure washer to lose pressure.

The water filter is clogged: The water filter helps to protect the pump from debris, and if it is clogged, it can restrict the flow of water and cause the pressure washer to lose pressure.

The pressure switch is faulty: The pressure switch is a safety device that prevents the pump from running when the pressure is too high. If the pressure switch is faulty, it can cause the pressure washer to shut down unexpectedly.

What can I do if my electric pressure washer stops working?

If your electric pressure washer stops working, here are a few things you can check:

Check the motor: Make sure that the motor is not overheating. If it is, let it cool down for a few minutes and then try turning it on again.

Check the pump: If the pump is damaged, you will need to have it repaired or replaced.

Check the hose: If the hose is kinked or damaged, replace it.

Check the water filter: Clean or replace the water filter.

Check the pressure switch: If the pressure switch is faulty, replace it.

If you have checked all of these things and the pressure washer still does not work, you may need to take it to a qualified technician for repairs.

How can I prevent my electric pressure washer from stopping working?

There are a few things you can do to prevent your electric pressure washer from stopping working:

Use the pressure washer at a moderate setting: Do not use the pressure washer at a higher setting than is necessary for the job you are doing.

Let the pressure washer cool down between uses: Do not run the pressure washer for more than a few minutes at a time without letting it cool down.

Inspect the pressure washer regularly: Check the motor, pump, hose, water filter, and pressure switch for signs of wear or damage.

Maintain the pressure washer according to the manufacturer’s instructions: This includes changing the oil, cleaning the air filter, and replacing the water filter as needed.

By following these tips, you can help to prevent your electric pressure washer from stopping working.

What are the signs that my electric pressure washer needs to be serviced?

There are a few signs that your electric pressure washer may need to be serviced:

The pressure washer is not generating enough pressure.
The pressure washer is leaking water.
The pressure washer is making strange noises.
The pressure washer is overheating.
The pressure washer is not turning on.

If you notice any of these signs, it is a good idea to have the pressure washer serviced by a qualified technician.

Where can I find a qualified technician to service my electric pressure washer?

You can find a qualified technician to service your electric pressure washer by doing a search online or by asking for recommendations from friends or family. You can also contact the manufacturer of your pressure washer for a list of authorized service centers.