Greenworks Pressure Washer 1700 Psi Soap Dispenser Not Working [Cause & Proven Fixes]
Your Greenworks 1700 PSI pressure washer is a powerful tool that can make quick work of cleaning your home, car, or yard. But when the soap dispenser stops working, it can be a major inconvenience. Not only does it make cleaning more difficult, but it can also lead to wasted soap and water.
In this guide, I’ll show you how to troubleshoot a Greenworks 1700 PSI pressure washer soap dispenser that’s not working. I’ll cover the most common causes of the problem, as well as the steps you can take to fix it. By the end of this guide, you’ll be able to get your pressure washer back up and running in no time.
Hook
Have you ever been frustrated by a pressure washer that won’t dispense soap If so, you’re not alone. This is a common problem that can be caused by a number of factors. But don’t worry, I’m here to help. In this guide, I’ll show you how to troubleshoot a Greenworks 1700 PSI pressure washer soap dispenser that’s not working. I’ll cover the most common causes of the problem, as well as the steps you can take to fix it. So if you’re ready to get your pressure washer back up and running, let’s get started!
Reasons Why Greenworks Pressure Washer 1700 Psi Soap Dispenser Not Working
No Soap in the Reservoir
The most common reason for a pressure washer soap dispenser not working is that there is no soap in the reservoir. Make sure the reservoir is filled with soap before using the dispenser.
Clogged Soap Nozzle
If there is soap in the reservoir but it is not coming out of the nozzle, the nozzle may be clogged. To clean the nozzle, remove it from the pressure washer and soak it in a vinegar and water solution for a few minutes. Then, rinse the nozzle thoroughly and reattach it to the pressure washer.
Blocked Hose
If the soap is coming out of the nozzle but it is not reaching the surface you are cleaning, the hose may be blocked. To check for a blockage, disconnect the hose from the pressure washer and nozzle and run water through it. If the water does not flow freely, there is a blockage in the hose. To clear the blockage, use a wire hanger or other thin object to push through the hose.
Faulty Soap Dispenser
If the soap dispenser is not working even after you have checked the reservoir, nozzle, and hose, the dispenser itself may be faulty. In this case, you will need to replace the dispenser.
How to Troubleshoot: Greenworks Pressure Washer 1700 PSI Soap Dispenser Not Working
Symptoms
If the soap is coming out of the nozzle but it is not reaching the surface you are cleaning, the hose may be blocked. To check for a blockage, disconnect the hose from the pressure washer and nozzle and run water through it. If the water does not flow freely, there is a blockage in the hose. To clear the blockage, use a wire hanger or other thin object to push through the hose.
Faulty Soap Dispenser
If the soap dispenser is not working even after you have checked the reservoir, nozzle, and hose, the dispenser itself may be faulty. In this case, you will need to replace the dispenser.
How to Troubleshoot: Greenworks Pressure Washer 1700 PSI Soap Dispenser Not Working
Symptoms
There are a few different symptoms that you may experience if your Greenworks pressure washer 1700 PSI soap dispenser is not working properly. These include:
The soap dispenser does not dispense any soap when you press the trigger.
The soap dispenser leaks soap.
The soap dispenser is not aligned with the spray wand.
The soap dispenser is not pumping soap.
Troubleshooting
If your Greenworks pressure washer 1700 PSI soap dispenser is not working properly, you can try the following troubleshooting steps:
1. Check the soap container:
Make sure that the soap container is full and that the soap is not clogged. If the soap container is empty, fill it up with soap. If the soap is clogged, try to clear the clog by using a thin object, such as a toothpick or a paper clip.
2. Check the soap dispenser:
Make sure that the soap dispenser is properly attached to the pressure washer. If the soap dispenser is not attached properly, it may not be able to dispense soap.3. Check the soap line:
Make sure that the soap line is not kinked or clogged. If the soap line is kinked or clogged, it may not be able to dispense soap.
4. Check the soap pump:
The soap pump is responsible for pumping soap from the soap container to the spray wand. If the soap pump is not working properly, it may not be able to dispense soap.
To check the soap pump, follow these steps:
1. Turn off the pressure washer and disconnect the power cord.
2. Remove the soap container from the pressure washer.
3. Locate the soap pump. The soap pump is usually located near the bottom of the pressure washer.
4. Inspect the soap pump for damage. If the soap pump is damaged, it will need to be replaced.
5. Turn on the pressure washer and connect the power cord.
6. Press the trigger on the spray wand. If the soap pump is working properly, you should see soap coming out of the spray wand.
If you have checked all of the above and your Greenworks pressure washer 1700 PSI soap dispenser is still not working, you may need to contact a qualified technician for assistance.
Preventative Maintenance
You can help prevent problems with your Greenworks pressure washer 1700 PSI soap dispenser by following these tips:
Keep the soap container full.
Clean the soap container regularly.
Inspect the soap line regularly for kinks or clogs.
Inspect the soap pump regularly for damage.
By following these tips, you can help keep your Greenworks pressure washer 1700 PSI soap dispenser working properly for years to come.
Also Read: Greenworks Pressure Washer 1800 Soap Not Working
FAQs: Greenworks Pressure Washer 1700 PSI Soap Dispenser Not Working
Why is my Greenworks pressure washer soap dispenser not working?
There are a few possible reasons why your Greenworks pressure washer soap dispenser may not be working. Here are a few things to check:
Is the soap dispenser turned on? Make sure that the soap dispenser is turned on and that the hose is connected to the soap dispenser.
Is there enough soap in the dispenser? The soap dispenser should be filled with soap to the fill line. If the dispenser is empty, add more soap.
Is the soap dispenser clogged? The soap dispenser may be clogged if there is too much soap or if the soap is too thick. Try cleaning the soap dispenser with a degreaser or warm water.
Is the pressure washer hose kinked or damaged? The pressure washer hose may be kinked or damaged, which can prevent the soap from flowing through the hose. Check the hose for kinks or damage and replace it if necessary.
How do I fix my Greenworks pressure washer soap dispenser?
If your Greenworks pressure washer soap dispenser is not working, here are a few things you can try:
Turn on the soap dispenser: Make sure that the soap dispenser is turned on and that the hose is connected to the soap dispenser.
Add more soap to the dispenser: The soap dispenser should be filled with soap to the fill line. If the dispenser is empty, add more soap.
Clean the soap dispenser: The soap dispenser may be clogged if there is too much soap or if the soap is too thick. Try cleaning the soap dispenser with a degreaser or warm water.
Replace the pressure washer hose: The pressure washer hose may be kinked or damaged, which can prevent the soap from flowing through the hose. Check the hose for kinks or damage and replace it if necessary.
What are the common problems with Greenworks pressure washer soap dispensers?
The most common problems with Greenworks pressure washer soap dispensers include:
The soap dispenser not working
The soap dispenser being clogged
The soap dispenser leaking
The soap dispenser not dispensing the correct amount of soap
How can I prevent problems with my Greenworks pressure washer soap dispenser?
There are a few things you can do to prevent problems with your Greenworks pressure washer soap dispenser:
Keep the soap dispenser clean: Make sure to clean the soap dispenser regularly to prevent it from becoming clogged.
Use the correct type of soap: Use a soap that is designed for use with pressure washers.
Don’t overfill the soap dispenser: Only fill the soap dispenser to the fill line. Overfilling the dispenser can cause it to overflow or leak.
Don’t kink or damage the pressure washer hose: Make sure to handle the pressure washer hose carefully to prevent it from kinking or damaging.
What should I do if my Greenworks pressure washer soap dispenser is still not working?
If your Greenworks pressure washer soap dispenser is still not working after you have tried the troubleshooting steps above, you may need to contact Greenworks customer service for help.