Greenworks Pressure Washer 1800 Soap Not Working [Easy Fixes!]

If your Greenworks 1800 PSI pressure washer isn’t dispensing soap, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a simple solution. In this guide, I’ll walk you through the steps to troubleshoot the issue and get your pressure washer back up and running in no time.

Reasons Why Greenworks Pressure Washer 1800 Soap Not Working

Reasons Why Greenworks Pressure Washer 1800 Soap Not Working

The soap dispenser is not turned on:
Make sure that the soap dispenser is turned on and that the soap is flowing freely.

The soap is too thick:
Dilute the soap with water until it is a thin, pourable consistency.

The soap nozzle is clogged:
Clean the soap nozzle with a small brush or needle to remove any blockages.

The pressure washer is not producing enough pressure:
Check the pressure washer’s pressure rating and make sure that it is compatible with the soap you are using.

The soap is not compatible with the pressure washer:
Some soaps are designed for specific types of pressure washers. Make sure that the soap you are using is compatible with your pressure washer.

The pressure washer is not properly maintained:
A dirty or clogged pressure washer can affect the performance of the soap dispenser. Make sure to regularly clean and maintain your pressure washer according to the manufacturer’s instructions.

How to Troubleshoot: Greenworks Pressure Washer 1800 Soap Not Working

Problem: Soap Not Dispensing

If the soap is not dispensing from your Greenworks Pressure Washer 1800, there are a few things you can check to troubleshoot the problem.

Check the soap reservoir:
Make sure that the soap reservoir is full and that the soap nozzle is not clogged.

Check the soap pump:
The soap pump may be clogged or damaged. To check the pump, turn on the pressure washer and listen for the pump to run. If you do not hear the pump running, the pump may be damaged and will need to be replaced.

Check the soap hose:
The soap hose may be kinked or damaged. To check the hose, inspect it for any kinks or damage. If the hose is damaged, it will need to be replaced.

Check the soap nozzle:
The soap nozzle may be clogged. To check the nozzle, remove it from the pressure washer and clean it with a brush.

If you have checked all of these things and the soap is still not dispensing, you may need to contact Greenworks customer service for assistance.

Problem: Soap Dispensing Too Much

If the soap is dispensing too much from your Greenworks Pressure Washer 1800, there are a few things you can check to troubleshoot the problem.

Check the soap reservoir:
Make sure that the soap reservoir is not overfilled.

Check the soap pump:
The soap pump may be calibrated incorrectly. To check the pump, turn on the pressure washer and adjust the soap flow rate. If the soap is still dispensing too much, the pump may need to be recalibrated.

Check the soap hose:
The soap hose may be kinked or damaged. To check the hose, inspect it for any kinks or damage. If the hose is damaged, it will need to be replaced.

Check the soap nozzle:
The soap nozzle may be clogged. To check the nozzle, remove it from the pressure washer and clean it with a brush.

If you have checked all of these things and the soap is still dispensing too much, you may need to contact Greenworks customer service for assistance.

Preventative Maintenance

To prevent problems with your Greenworks Pressure Washer 1800 soap dispenser, you can follow these tips:

Keep the soap reservoir full:
A full soap reservoir will help to prevent the pump from overheating.

Clean the soap nozzle regularly:
A clogged soap nozzle can prevent the soap from dispensing properly.

Inspect the soap hose regularly:
A kinked or damaged soap hose can prevent the soap from dispensing properly.

Adjust the soap flow rate as needed:
A too high or too low soap flow rate can cause problems with the soap dispenser.

By following these tips, you can help to keep your Greenworks Pressure Washer 1800 soap dispenser working properly.

Also Read: Halfords Pressure Washer Not Working

FAQs: Greenworks Pressure Washer 1800 Soap Not Working

Why is my Greenworks pressure washer 1800 not spraying soap?

There are a few reasons why your Greenworks pressure washer 1800 might not be spraying soap. Here are some of the most common causes:

The soap tank is empty: Make sure that the soap tank is filled with soap and that the lid is tightly closed.

The soap nozzle is clogged: Try cleaning the soap nozzle with a toothpick or a small brush.

The soap pump is not working properly: If the soap pump is not working properly, you may need to replace it.

The pressure washer is not turned on: Make sure that the pressure washer is turned on and that the soap switch is engaged.

How do I fix my Greenworks pressure washer 1800 soap not working?

To fix your Greenworks pressure washer 1800 soap not working, you can try the following steps:

1. Check the soap tank: Make sure that the soap tank is filled with soap and that the lid is tightly closed.
2. Clean the soap nozzle: Try cleaning the soap nozzle with a toothpick or a small brush.
3. Replace the soap pump: If the soap pump is not working properly, you may need to replace it.
4. Turn on the pressure washer: Make sure that the pressure washer is turned on and that the soap switch is engaged.

What is the soap setting on a Greenworks pressure washer?

The soap setting on a Greenworks pressure washer controls the amount of soap that is sprayed out of the nozzle. The higher the soap setting, the more soap that will be sprayed.

How do I use soap with my Greenworks pressure washer?

To use soap with your Greenworks pressure washer, follow these steps:

1. Fill the soap tank with soap.
2. Turn on the pressure washer and select the soap setting.
3. Attach the soap nozzle to the pressure washer.
4. Spray the soap onto the surface that you want to clean.

What kind of soap should I use with my Greenworks pressure washer?

You can use any type of soap with your Greenworks pressure washer, but it is best to use a soap that is specifically designed for pressure washers. This type of soap will be more effective at cleaning surfaces and will not damage the pressure washer.