Homelite Pressure Washer Pump Not Working: [You Should Try This]

As a Pressure Washer Repair Technician, I have seen my fair share of Homelite pressure washer pump problems. It is one of the most common issues that homeowners face, and it can be incredibly frustrating. A broken pressure washer can mean that you can’t clean your driveway, your deck, or your car. It can also be dangerous, as you may be tempted to use a different tool that is not designed for pressure washing.

In this guide, I will walk you through the steps to troubleshoot a Homelite pressure washer pump that is not working. I will explain the different causes of this problem and how to fix them. By the end of this guide, you will be able to diagnose and resolve the issue quickly and easily, so you can get back to enjoying your pressure washer.

Most Common Reasons Homelite Pressure Washer Pump Not Working

Most Common Reasons

No Water Flow

Blocked inlet filter:
The inlet filter is located at the end of the hose that connects to the water source. If it is clogged, water will not be able to flow into the pump. To clean the filter, remove it from the hose and rinse it under warm water.

Clogged pump outlet:
The pump outlet is located at the end of the hose that connects to the spray gun. If it is clogged, water will not be able to flow out of the pump. To clean the outlet, remove the spray gun from the hose and use a small brush to clean out the debris.

Defective pump:
If the pump is defective, it will not be able to generate enough pressure to push water through the hose. To check if the pump is defective, turn on the pressure washer and listen for the pump to start. If you do not hear the pump running, it is likely defective.

Low Pressure

Low water pressure at the source:
If the water pressure at the source is too low, the pressure washer will not be able to generate enough pressure to operate properly. To check the water pressure at the source, use a pressure gauge to measure the pressure at the faucet. If the pressure is below 40 psi, it is too low for the pressure washer.

Clogged inlet filter:
See No Water Flow above.

Clogged pump outlet:
See No Water Flow above.

Defective pump:
See No Water Flow above.

Dirty or damaged hose:
If the hose is dirty or damaged, it can restrict the flow of water and cause low pressure. To check the hose, inspect it for leaks or cracks. If the hose is damaged, replace it.

High Pressure

Defective pressure regulator:
The pressure regulator is a valve that controls the maximum pressure that the pump can generate. If the pressure regulator is defective, it may allow the pump to generate too much pressure. To check the pressure regulator, turn on the pressure washer and listen for the pump to start. If the pump is running but the pressure is not increasing, the pressure regulator may be defective.

Clogged pump outlet:
See No Water Flow above.

Defective pump:
See No Water Flow above.

How to Troubleshoot: Homelite Pressure Washer Pump Not Working

Your Homelite pressure washer is a powerful tool that can make quick work of cleaning your home, car, or outdoor furniture. But what happens when the pump stops working? Don’t panic! This guide will help you troubleshoot the problem and get your pressure washer back up and running in no time.

Step 1: Check the power supply

The first thing you need to do is check to make sure that the pressure washer is getting power. Make sure that the power cord is plugged into an outlet that is working properly. You can also try plugging the pressure washer into a different outlet to see if that fixes the problem.

Step 2: Check the hoses and connections

Next, you need to check the hoses and connections to make sure that they are not damaged or kinked. If the hoses are damaged, you will need to replace them. If the connections are loose, you will need to tighten them.

Step 3: Check the oil level

If your pressure washer is equipped with an oil pump, you will need to check the oil level. The oil level should be between the full and add marks on the dipstick. If the oil level is low, you will need to add oil to the pressure washer.

Step 4: Check the air filter

The air filter on your pressure washer helps to keep dirt and debris out of the engine. If the air filter is dirty, it can restrict airflow to the engine and cause it to overheat. To check the air filter, remove it from the pressure washer and inspect it for dirt and debris. If the air filter is dirty, you will need to clean it or replace it.

Step 5: Check the fuel filter

The fuel filter on your pressure washer helps to remove dirt and debris from the fuel. If the fuel filter is dirty, it can restrict the flow of fuel to the engine and cause it to run poorly. To check the fuel filter, remove it from the pressure washer and inspect it for dirt and debris. If the fuel filter is dirty, you will need to clean it or replace it.

Step 6: Check the spark plug

The spark plug on your pressure washer helps to ignite the fuel in the engine. If the spark plug is damaged or fouled, it can cause the engine to misfire or not start at all. To check the spark plug, remove it from the engine and inspect it for damage. If the spark plug is damaged or fouled, you will need to replace it.

Step 7: Check the carburetor

The carburetor on your pressure washer mixes fuel and air to create a combustible mixture. If the carburetor is not adjusted properly, it can cause the engine to run poorly. To check the carburetor, you will need to remove it from the pressure washer and adjust the fuel and air mixture.

Step 8: Check the engine

If you have checked all of the other components and the pressure washer is still not working, you may need to have the engine serviced or repaired.

Conclusion

By following these steps, you can troubleshoot most common problems with a Homelite pressure washer pump. If you are unable to fix the problem yourself, you can always take your pressure washer to a qualified technician for repairs.

Also Read: Honda Gcv160 Pressure Washer Soap Dispenser Not Working