Homelite Super 2 Chainsaw Oiler Not Working: [Solved]

As a chainsaw owner, there’s nothing more frustrating than having your saw not work properly. One of the most common problems that can occur is when the oiler stops working. This can be a major inconvenience, as it can lead to damage to your saw and make it difficult to use.

In this guide, I’ll walk you through the steps to troubleshoot a Homelite Super 2 chainsaw oiler that’s not working. I’ll cover the most common causes of this problem and provide instructions on how to fix them. By the end of this guide, you’ll be able to get your saw back up and running in no time.

1. Identifying the Problem

The first step to troubleshooting any problem is to identify the problem. In the case of a Homelite Super 2 chainsaw oiler that’s not working, there are a few things you can check:

Is the oiler switch turned on? This is a simple mistake that many people make. Make sure that the oiler switch is in the On position.
Is there oil in the oil tank? If the oil tank is empty, the oiler won’t be able to function. Check the oil tank and add oil if necessary.
Is the oil line clear? The oil line can become clogged with debris, which can prevent the oil from reaching the chain. Check the oil line and clear any obstructions.
Is the oil pump working properly? The oil pump is responsible for pumping oil to the chain. If the oil pump is not working properly, it will not be able to provide enough oil to the chain. You can test the oil pump by running the saw and listening for the sound of the pump. If you don’t hear the pump running, it may be necessary to replace the pump.

2. Troubleshooting the Problem

Once you’ve identified the problem, you can begin troubleshooting it. Here are the steps to troubleshoot a Homelite Super 2 chainsaw oiler that’s not working:

1. Check the oiler switch. Make sure that the oiler switch is in the On position.
2. Check the oil tank. Make sure that the oil tank is full.
3. Check the oil line. Clear any obstructions in the oil line.
4. Test the oil pump. Run the saw and listen for the sound of the pump. If you don’t hear the pump running, it may be necessary to replace the pump.

If you’ve followed these steps and the oiler is still not working, it may be necessary to take your saw to a qualified repair shop.

Most Common Reasons Of Homelite Super 2 Chainsaw Oiler Not Working

1. Oiler Hose is Clogged

The oiler hose can become clogged with sawdust and debris, preventing oil from reaching the chain. To fix this, remove the hose from the chainsaw and clean it with a wire brush.

2. Oiler Pump is Not Working

The oiler pump may be damaged or broken, preventing it from pumping oil to the chain. To check if the pump is working, turn on the chainsaw and listen for a whining sound. If you don’t hear a sound, the pump may be broken. You can also try manually pumping the oiler to see if oil comes out.

3. Oiler Level is Low

If the oil level in the chainsaw is low, the oiler will not be able to pump enough oil to the chain. To fix this, add oil to the chainsaw until the level reaches the full mark.

4. Oiler is Not Aligned Properly

The oiler may not be aligned properly with the chain, preventing oil from reaching the chain. To fix this, adjust the oiler so that it is aligned with the chain.

5. Oiler is Not Installed Properly

The oiler may not be installed properly, preventing it from working properly. To fix this, remove the oiler and reinstall it according to the manufacturer’s instructions.

How to Troubleshoot: Homelite Super 2 Chainsaw Oiler Not Working

Symptoms of a Chainsaw Oiler Not Working

There are a few signs that your Homelite Super 2 chainsaw oiler may not be working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain and bar.
The oil reservoir is empty or low, even though you have been adding oil regularly.
The oiler is making a loud noise or is not working at all.

Troubleshooting a Chainsaw Oiler

If you suspect that your Homelite Super 2 chainsaw oiler is not working properly, there are a few things you can check to troubleshoot the problem.

1. Check the oil level. The first thing you should do is check the oil level in the reservoir. If the reservoir is empty or low, fill it up with the correct type of oil.

2. Check the oil line. The next thing you should check is the oil line. Make sure that the line is not kinked or blocked. If it is, you will need to replace the line.

3. Check the oil pump. The oil pump is responsible for pumping oil to the chain. If the pump is not working properly, you will need to replace it.

4. Check the oiler switch. The oiler switch is responsible for turning the oiler on and off. If the switch is not working properly, you will need to replace it.

5. Check the engine. If all of the above checks have been completed and the oiler is still not working, the problem may be with the engine. In this case, you will need to take the chainsaw to a qualified repair shop.

Preventing Chainsaw Oiler Problems

The best way to prevent chainsaw oiler problems is to maintain your chainsaw regularly. This includes:

Adding oil to the reservoir regularly.
Checking the oil level regularly.
Cleaning the oil line regularly.
Replacing the oil pump and oiler switch as needed.

By following these tips, you can help to keep your Homelite Super 2 chainsaw running smoothly and efficiently.

Also Check: Homelite Xl Chainsaw Oiler Not Working

FAQs: Homelite Super 2 Chainsaw Oiler Not Working

Why is my Homelite Super 2 chainsaw oiler not working?

There are a few possible reasons why your Homelite Super 2 chainsaw oiler may not be working.

The oiler may be clogged. If the oiler is clogged, it will not be able to pump oil to the chain. To check if the oiler is clogged, remove the oiler cover and look inside. If you see a build-up of sawdust or debris, you will need to clean the oiler.
The oiler may be empty. If the oiler is empty, it will not be able to pump oil to the chain. To check if the oiler is empty, remove the oiler cover and look inside. If you see no oil, you will need to add oil to the oiler.
The oiler may be defective. If the oiler is defective, it will not be able to pump oil to the chain. To check if the oiler is defective, you can try replacing the oiler.

How do I clean the oiler on my Homelite Super 2 chainsaw?

To clean the oiler on your Homelite Super 2 chainsaw, follow these steps:

1. Remove the oiler cover.
2. Use a small brush to remove any build-up of sawdust or debris from the inside of the oiler.
3. Reinstall the oiler cover.

How do I add oil to the oiler on my Homelite Super 2 chainsaw?

To add oil to the oiler on your Homelite Super 2 chainsaw, follow these steps:

1. Remove the oiler cover.
2. Use a funnel to add oil to the oiler until the oil level reaches the fill line.
3. Reinstall the oiler cover.

How do I replace the oiler on my Homelite Super 2 chainsaw?

To replace the oiler on your Homelite Super 2 chainsaw, follow these steps:

1. Remove the oiler cover.
2. Remove the old oiler.
3. Install the new oiler.
4. Reinstall the oiler cover.

What should I do if my Homelite Super 2 chainsaw oiler is still not working?

If your Homelite Super 2 chainsaw oiler is still not working after you have tried the steps above, you should contact a qualified service technician.

 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *