Honda Pressure Washer Soap Not Working: [How To Fix It]

As a Pressure Washer Repair Technician, I have seen my fair share of problems with Honda pressure washers. One of the most common issues is when the soap doesn’t work. This can be a frustrating and inconvenient problem, as it can prevent you from using your pressure washer to clean your home or property.

In this guide, I will walk you through the steps to troubleshoot the problem and resolve it quickly. By the end of this guide, you will be able to get your pressure washer soaping again in no time!

Most Common Reasons Honda Pressure Washer Soap Not Working

Most Common Reasons

Incorrect soap type or concentration:
The type of soap you use and the concentration of the soap solution can affect how well it works in your pressure washer. Make sure you are using a soap that is designed for use with pressure washers and that you are using the correct concentration of soap.

Dirty soap tank:
If the soap tank is dirty, it can prevent the soap from being properly dispensed. Clean the soap tank regularly to prevent this problem.

Clogged soap nozzle:
A clogged soap nozzle can prevent the soap from being properly dispensed. Clean the soap nozzle regularly to prevent this problem.

Low water pressure:
If the water pressure is too low, the soap will not be able to be properly dispersed. Make sure your water pressure is high enough to properly use your pressure washer.

Faulty soap pump:
If the soap pump is faulty, it will not be able to properly dispense the soap. Have the soap pump repaired or replaced if it is faulty.

How to Troubleshoot: Honda Pressure Washer Soap Not Working

Symptoms

There are a few different symptoms that you may experience if your Honda pressure washer soap is not working properly. These include:

The soap dispenser is not dispensing soap.

The soap is not coming out of the wand when you press the trigger.

The soap is coming out of the wand in a thin stream, rather than a thick foam.

The soap is not sudsing up properly.

Causes

There are a number of different things that could cause your Honda pressure washer soap to not work properly. These include:

The soap dispenser is clogged:
If the soap dispenser is clogged, it will not be able to dispense soap properly. This can be caused by a build-up of soap residue, dirt, or debris.

The soap wand is clogged:
The soap wand can also become clogged, which will prevent the soap from coming out of the wand. This can be caused by a build-up of soap residue, dirt, or debris.

The soap is too thick:
If the soap is too thick, it will not come out of the wand properly. This can be caused by using too much soap, or by using a soap that is too thick.

The pressure washer is not turned on high enough:
The pressure washer needs to be turned on high enough in order to generate enough pressure to push the soap through the wand. If the pressure washer is not turned on high enough, the soap will not come out of the wand properly.

Solutions

There are a few different things that you can do to troubleshoot a Honda pressure washer soap that is not working properly. These include:

Clean the soap dispenser:
If the soap dispenser is clogged, you can try to clean it by removing the dispenser from the pressure washer and soaking it in a solution of warm water and dish soap. You can also try using a pipe cleaner to clear any blockages.

Clean the soap wand:
If the soap wand is clogged, you can try to clean it by removing the wand from the pressure washer and soaking it in a solution of warm water and dish soap. You can also try using a pipe cleaner to clear any blockages.

Thin the soap:
If the soap is too thick, you can try to thin it by adding a little bit of water. You can also try using a different soap that is thinner.

Turn up the pressure washer:
If the pressure washer is not turned on high enough, you can try turning it up. You should make sure that the pressure washer is turned on high enough to generate enough pressure to push the soap through the wand.

Prevention

There are a few things that you can do to prevent your Honda pressure washer soap from not working properly. These include:

Use the right amount of soap:
Make sure that you are using the right amount of soap for your pressure washer. Too much soap can clog the dispenser and the wand.

Use a thin soap:
Use a thin soap that will not clog the dispenser or the wand.

Turn the pressure washer on high:
Make sure that the pressure washer is turned on high enough to generate enough pressure to push the soap through the wand.

Clean the dispenser and the wand regularly:
Clean the dispenser and the wand regularly to prevent them from becoming clogged.

By following these tips, you can help to prevent your Honda pressure washer soap from not working properly.

Also Read: Husky Pressure Washer Soap Not Working