How To Change Screw On Power Drill: [Explained]

Power Drill Screw Replacement: A Step-by-Step Guide

Your power drill is an essential tool for any homeowner or DIYer. But what happens when the screw on your power drill comes loose Don’t worry, replacing a power drill screw is a simple task that can be completed in just a few minutes.

In this step-by-step guide, we will show you how to remove and replace the screw on your power drill. We’ll also provide some tips on how to prevent your power drill screw from coming loose in the future.

How To Change Screw On Power Drill

1. Turn off the power drill and unplug it.
2. Use a Phillips head screwdriver to remove the screw that holds the chuck in place.
3. Remove the chuck from the drill.
4. Insert the new chuck into the drill and tighten the screw to secure it in place.
5. Plug in the drill and turn it on to test the new chuck.

Also Read: How To Charge A Power Drill

How To Change Screw On Power Drill

Tools Needed

Phillips head screwdriver

Replacement screw

Penetrating oil

Instructions

1. Turn off the power drill and unplug it from the outlet.
2. Use the Phillips head screwdriver to remove the screw that holds the chuck in place.
3. Apply a few drops of penetrating oil to the threads of the chuck.
4. Use the Phillips head screwdriver to turn the chuck counterclockwise until it comes loose.
5. Remove the old screw and replace it with the new screw.
6. Tighten the new screw until it is snug.
7. Plug the power drill back into the outlet and turn it on.

Tips

If the screw is stuck, you can try heating it with a hair dryer or using a penetrating oil to loosen it.

Be careful not to strip the threads of the chuck when tightening the new screw.

If you are not comfortable working on power tools, you can take your power drill to a qualified repair shop.