How To Check If Poulan Chainsaw Oiler Not Working: [Reasons + Fixed]

As a chainsaw owner, there’s nothing more frustrating than having your saw not work properly. One of the most common problems is a chainsaw oiler that isn’t working properly. This can cause your saw to overheat and eventually damage the engine. If you’re experiencing this problem, it’s important to troubleshoot the issue quickly so that you can get your saw back up and running.

In this guide, I’ll walk you through the steps on how to check if your Poulan chainsaw oiler is working properly. I’ll also provide some tips on how to fix the problem if it’s not working. So if you’re having trouble with your Poulan chainsaw oiler, read on for help!

Most Common Reasons Of How To Check If Poulan Chainsaw Oiler Not Working

Most Common Reasons Of How To Check If Poulan Chainsaw Oiler Not Working

1. Oiler Hose Is Clogged

The oiler hose can become clogged with sawdust or other debris, preventing oil from reaching the chain. To check if the oiler hose is clogged, remove the spark plug and turn the chainsaw over. If oil does not come out of the hole where the spark plug was, the oiler hose is clogged.

2. Oiler Pump Is Not Working

The oiler pump can fail if it is worn out or damaged. To check if the oiler pump is working, turn the chainsaw over and listen for the sound of the pump. If you do not hear the pump running, it is likely that the pump is not working.

3. Oiler Level Is Low

If the oiler level is low, the oiler will not be able to pump enough oil to the chain. To check the oil level, remove the oil cap and look at the oil level. If the oil level is low, add oil to the chainsaw until the level is up to the full mark.

4. Oiler Switch Is Off

The oiler switch can be turned off accidentally. To check if the oiler switch is on, look at the switch and make sure that it is in the On position.

How to Check if Poulan Chainsaw Oiler Not Working

Symptoms of a Poulan Chainsaw Oiler Not Working

There are a few signs that can indicate that your Poulan chainsaw oiler is not working properly. These include:

The chainsaw is running hot, even when it is not under load.
The chainsaw is smoking.
The chainsaw is making a loud, whining noise.
The chainsaw is losing power.
The chainsaw is cutting slowly.

If you notice any of these symptoms, it is important to check the oiler to make sure that it is working properly.

How to Check the Poulan Chainsaw Oiler

To check the Poulan chainsaw oiler, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover.
3. Check the oil level in the oiler reservoir. The oil level should be between the full and add marks on the reservoir.
4. If the oil level is low, add oil to the reservoir until it reaches the full mark.
5. Replace the oiler cover.

Troubleshooting a Poulan Chainsaw Oiler

If the oil level in the oiler reservoir is correct and the oiler is still not working, there may be a problem with the oiler itself. To troubleshoot the oiler, follow these steps:

1. Inspect the oiler for damage. Look for cracks or leaks in the oiler housing.
2. Check the oiler screen for clogs. The oiler screen is located inside the oiler reservoir. If the screen is clogged, it will prevent oil from flowing to the chainsaw chain.
3. Replace the oiler if it is damaged or if the screen is clogged.

Preventing Poulan Chainsaw Oiler Problems

You can help prevent Poulan chainsaw oiler problems by following these tips:

Keep the oil level in the oiler reservoir at the correct level.
Inspect the oiler regularly for damage or leaks.
Clean the oiler screen regularly.
Replace the oiler as needed.

By following these tips, you can help keep your Poulan chainsaw running smoothly and efficiently.

Also Check: Husqvarna 345 Chainsaw Oiler Not Working

FAQs: How to Check if Poulan Chainsaw Oiler Not Working

How do I know if my Poulan chainsaw oiler is not working?

There are a few ways to check if your Poulan chainsaw oiler is not working.

Check the oil level. The oil level should be between the full and add marks on the oil tank. If the oil level is low, add oil to the tank until it reaches the full mark.
Check the oil filter. The oil filter should be clean and free of debris. If the oil filter is dirty, replace it with a new one.
Check the oil line. The oil line should be clear and free of kinks or obstructions. If the oil line is blocked, clear it out or replace it with a new one.
Check the oil pump. The oil pump should be working properly and pumping oil to the chainsaw chain. If the oil pump is not working, you will need to have it repaired or replaced.

What are the symptoms of a Poulan chainsaw oiler not working?

There are a few symptoms that may indicate that your Poulan chainsaw oiler is not working properly.

The chainsaw chain is not being lubricated properly. This can cause the chain to overheat and wear out quickly.
The chainsaw chain is smoking. This is a sign that the chain is overheating due to lack of lubrication.
The chainsaw chain is making a loud squealing noise. This is a sign that the chain is rubbing against the bar without lubrication.
The chainsaw chain is skipping or jumping. This is a sign that the chain is not being properly tensioned.

How do I fix a Poulan chainsaw oiler that is not working?

If you suspect that your Poulan chainsaw oiler is not working properly, you can try to fix it yourself.

Check the oil level. Make sure that the oil level is between the full and add marks on the oil tank. If the oil level is low, add oil to the tank until it reaches the full mark.
Check the oil filter. Remove the oil filter and inspect it for debris. If the oil filter is dirty, clean it with a solvent or replace it with a new one.
Check the oil line. Inspect the oil line for kinks or obstructions. If the oil line is blocked, clear it out or replace it with a new one.
Check the oil pump. Remove the oil pump and inspect it for damage. If the oil pump is damaged, you will need to have it repaired or replaced.

If you are unable to fix the Poulan chainsaw oiler yourself, you can take it to a qualified service center for repairs.

How can I prevent my Poulan chainsaw oiler from failing?

There are a few things you can do to prevent your Poulan chainsaw oiler from failing.

Keep the oil level topped up. Make sure that the oil level is between the full and add marks on the oil tank.
Change the oil filter regularly. The oil filter should be changed every 25 hours of use.
Inspect the oil line regularly. Inspect the oil line for kinks or obstructions. If the oil line is blocked, clear it out or replace it with a new one.
Use high-quality oil. Use a high-quality oil that is designed for chainsaws.

By following these tips, you can help to prevent your Poulan chainsaw oiler from failing.

What are the dangers of using a Poulan chainsaw with a non-working oiler?

Using a Poulan chainsaw with a non-working oiler can be dangerous.

The chainsaw chain can overheat and wear out quickly.
The chainsaw chain can smoke.
The chainsaw chain can make a loud squealing noise.
The chainsaw chain can skip or jump.
The chainsaw chain can come off the bar and injure the user.

If you suspect that your Poulan chainsaw oiler is not working, you should stop using the chainsaw immediately and have it repaired or replaced.