How To Drill A Hole Without A Power Drill: [Get Answer]

Tired of using a power drill

Drilling holes without a power drill is easier than you think!

With just a few simple tools, you can easily create holes in a variety of materials, from wood to plastic to metal.

So whether you’re a DIYer or a professional, read on for our step-by-step guide on .

How To Drill A Hole Without A Power Drill

To drill a hole without a power drill, you will need:

A hammer
A nail
A piece of wood

1. Place the wood on a flat surface.
2. Center the nail on the spot where you want to drill the hole.
3. Hold the hammer with your dominant hand and the nail with your non-dominant hand.
4. Strike the head of the nail with the hammer until the nail goes through the wood.
5. Use the nail to start the hole, then switch to a drill bit to finish the job.

Also Read: How To Drill A Hole Without Power Tools

How to Drill a Hole Without a Power Drill

What You’ll Need

A hammer

A nail

A piece of wood

A screwdriver

A drill bit

A piece of sandpaper


1. Find the spot where you want to drill the hole.
2. Place the piece of wood under the spot.
3. Hammer the nail into the wood until it is about halfway through.
4. Use the screwdriver to turn the nail until it is perpendicular to the wood.
5. Place the drill bit in the chuck of the screwdriver.
6. Turn on the screwdriver and slowly drill into the wood until you reach the desired depth.
7. Use the sandpaper to smooth out the edges of the hole.


Use a drill bit that is the same diameter as the nail.

Make sure the nail is straight before you start drilling.

Apply pressure to the screwdriver as you drill to prevent the drill bit from slipping.

Stop drilling if the drill bit starts to bind.

Clean the hole with a damp cloth after you are finished drilling.


Be careful not to drill into anything that you don’t want to damage.

Wear safety glasses to protect your eyes from flying debris.

Keep children away from the drill while you are using it.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *