How To Replace The Power Cord On A Dewalt Drill: [Answered]

Do you have a Dewalt drill that won’t turn on If so, it may be because the power cord is damaged. Replacing the power cord on a Dewalt drill is a relatively simple task that can be completed in just a few minutes. In this blog post, we will walk you through the steps of .

Here’s a quick overview of the process:

1. Unplug the drill from the power outlet.
2. Remove the two screws that hold the battery cover in place.
3. Remove the battery cover.
4. Disconnect the old power cord from the drill.
5. Connect the new power cord to the drill.
6. Replace the battery cover and tighten the screws.
7. Plug the drill back into the power outlet.

That’s it! You’ve now successfully replaced the power cord on your Dewalt drill.

How To Replace The Power Cord On A Dewalt Drill

1. Turn off the drill and unplug it from the outlet.
2. Remove the screws that hold the cover on the back of the drill.
3. Remove the cover.
4. Disconnect the old power cord from the drill.
5. Connect the new power cord to the drill.
6. Reattach the cover.
7. Replace the screws.
8. Plug the drill into an outlet and test it to make sure it works.

Also Read: How To Reverse A Power Drill

How To Replace The Power Cord On A Dewalt Drill

Tools Needed

Phillips head screwdriver

Wire cutters

Electrical tape

Replacement power cord

Instructions

1. Turn off the drill and unplug it from the outlet.
2. Remove the screws that hold the battery housing in place.
3. Remove the battery housing.
4. Locate the power cord.
5. Disconnect the old power cord from the drill.
6. Strip the ends of the new power cord.
7. Connect the new power cord to the drill.
8. Reattach the battery housing.
9. Secure the battery housing with the screws.
10. Plug the drill into an outlet and test it to make sure it works properly.

Tips

Be careful not to cut the wires when you are stripping the ends of the new power cord.

Make sure the new power cord is the same length as the old power cord.

Double-check the connections to make sure they are secure.

Test the drill to make sure it works properly before using it.