How To Use Drill Battery For Power Wheels: [Get Answer]

Are you tired of your power wheels running out of battery power halfway through a race Do you want to be able to keep your kids entertained for longer without having to constantly recharge the batteries If so, then you need to learn how to use a drill battery for power wheels!

Drill batteries are a great way to extend the runtime of your power wheels, and they’re relatively easy to install. In this blog post, we’ll show you how to do just that. We’ll also provide some tips on how to choose the right drill battery for your power wheels.

So if you’re ready to give your kids the gift of endless fun, keep reading!

How To Use Drill Battery For Power Wheels

To use a drill battery for power wheels, you will need a drill battery adapter. Drill battery adapters are available at most hardware stores. Once you have the adapter, follow these steps:

1. Remove the battery from the drill.
2. Align the battery terminals with the terminals on the adapter.
3. Insert the battery into the adapter.
4. Reconnect the adapter to the power wheels.

The power wheels will now be powered by the drill battery.

Also Read: How To Use Ikea Power Drill

How To Use Drill Battery For Power Wheels

What You Will Need

Drill battery

Power wheels

12-volt adapter

Wire cutters

Soldering iron

Solder

Heat shrink tubing

Instructions

1. Disconnect the power wheels from the charger.
2. Remove the battery cover from the power wheels.
3. Locate the battery terminals.
4. Cut the positive and negative wires from the battery.
5. Strip the ends of the wires.
6. Solder the positive wire to the positive terminal of the drill battery.
7. Solder the negative wire to the negative terminal of the drill battery.
8. Cover the solder joints with heat shrink tubing.
9. Reattach the battery cover to the power wheels.
10. Connect the power wheels to the charger.

Tips

Make sure that the drill battery is the same voltage as the power wheels battery.

Use a 12-volt adapter that is rated for the amperage of the drill battery.

Be careful not to solder the wires too close to the battery terminals.

Use heat shrink tubing that is the same size as the wires.

Warnings

Do not connect the drill battery to the power wheels battery if the batteries are not the same voltage.

Do not connect the drill battery to the power wheels battery if the amperage of the adapter is not rated for the drill battery.

Do not solder the wires too close to the battery terminals.

Do not use heat shrink tubing that is too small for the wires.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *