How To Wire A Drill Battery For Power Wheels: [Explained]
Attention all Power Wheels owners! Do you have a drill battery that you’re not using anymore Well, you can put it to good use by wiring it into your Power Wheels. This is a great way to extend the battery life of your Power Wheels and save money on replacement batteries. In this blog post, I will show you in 5 easy steps. So, if you’re ready to give your Power Wheels a power boost, keep reading!
How To Wire A Drill Battery For Power Wheels
To wire a drill battery for power wheels, you will need a drill battery, a power wheels battery, and a wiring harness.
1. Remove the battery from the power wheels.
2. Connect the positive terminal of the drill battery to the positive terminal of the power wheels battery.
3. Connect the negative terminal of the drill battery to the negative terminal of the power wheels battery.
4. Reconnect the battery to the power wheels.
The power wheels should now be powered by the drill battery.
Also Read: How To Wire Drill Battery To Power Wheels
How To Wire A Drill Battery For Power Wheels
Tools and Materials
Drill battery
Power wheels
Wire strippers
Wire cutters
Electrical tape
12-gauge wire
2-way switch
Instructions
1. Remove the battery from the power wheels.
2. Strip the ends of the battery wires.
3. Connect the positive wire from the battery to the positive terminal on the switch.
4. Connect the negative wire from the battery to the negative terminal on the switch.
5. Connect the two remaining wires from the switch to the motor on the power wheels.
6. Secure the wires with electrical tape.
Tips
Make sure the wires are the correct size for the switch and motor.
Use a voltmeter to check the voltage of the battery before connecting it to the power wheels.
Be careful not to short-circuit the wires.
Test the power wheels to make sure they are working properly.
Warnings
Always disconnect the battery from the power wheels before working on it.
Never work on a power wheels that is plugged in.
Be careful not to touch the wires with your bare hands.
Store the battery in a safe place away from children.