Husqvarna 345 Chainsaw Oiler Not Working: [Proven Ways To Fix]

As a chainsaw repair professional, I’ve seen my fair share of Husqvarna 345 chainsaws with oiler problems. It’s a common issue that can be frustrating and inconvenient for chainsaw owners. But it’s also a problem that can be quickly diagnosed and resolved, restoring functionality to your tool.

In this guide, I’ll walk you through the steps of troubleshooting a Husqvarna 345 chainsaw oiler that’s not working. I’ll cover everything from checking the oil level to inspecting the oiler components. By the end of this guide, you’ll be able to identify and fix the problem, so you can get back to using your chainsaw without any hassle.

Most Common Reasons Of Husqvarna 345 Chainsaw Oiler Not Working

1. Oiler Hose Clogged

The oiler hose can become clogged with sawdust or other debris, preventing oil from reaching the chain. To fix this, remove the hose from the chainsaw and clean it with a solvent such as denatured alcohol.

2. Oiler Pump Malfunction

The oiler pump may malfunction if it is damaged or worn out. To check the pump, remove the oiler cover and look for signs of damage or wear. If the pump is damaged, it will need to be replaced.

3. Oiler Level Low

If the oil level in the chainsaw is low, the oiler will not be able to pump enough oil to the chain. To fix this, add oil to the chainsaw until the level reaches the full mark.

4. Oil Filter Clogged

The oil filter can become clogged with sawdust or other debris, preventing oil from flowing through the filter. To fix this, remove the filter and clean it with a solvent such as denatured alcohol.

5. Oil Line Kinked or Damaged

The oil line can become kinked or damaged, preventing oil from flowing to the chain. To fix this, inspect the oil line for kinks or damage and replace it if necessary.

How to Troubleshoot: Husqvarna 345 Chainsaw Oiler Not Working

Symptoms of a Husqvarna 345 Chainsaw Oiler Not Working

There are a few telltale signs that your Husqvarna 345 chainsaw oiler is not working properly. These include:

The chainsaw is running hot, even when it is not under load.
The chain is smoking or sparking.
The chain is not being lubricated properly, and is starting to rust.
The oil level in the chainsaw is low.

If you notice any of these symptoms, it is important to troubleshoot the problem and fix it as soon as possible. A malfunctioning oiler can damage your chainsaw and make it dangerous to use.

How to Troubleshoot a Husqvarna 345 Chainsaw Oiler

To troubleshoot a Husqvarna 345 chainsaw oiler, you will need to:

1. Check the oil level.
2. Inspect the oiler pump.
3. Clean the oiler screen.
4. Replace the oiler gasket.
5. Replace the oiler pump.

1. Check the oil level.

The first step in troubleshooting a Husqvarna 345 chainsaw oiler is to check the oil level. To do this, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oil cap from the chainsaw.
3. Use a flashlight to check the oil level in the sight glass.
4. The oil level should be between the full and add marks on the sight glass.

If the oil level is low, add oil to the chainsaw until the level reaches the full mark.

2. Inspect the oiler pump.

The next step is to inspect the oiler pump. To do this, follow these steps:

1. Remove the oil cap from the chainsaw.
2. Locate the oiler pump on the side of the chainsaw.
3. Use a flashlight to inspect the oiler pump for damage.
4. Look for cracks, leaks, or other damage.

If the oiler pump is damaged, it will need to be replaced.

3. Clean the oiler screen.

The oiler screen is a small screen that prevents dirt and debris from entering the oiler pump. If the oiler screen is clogged, it can restrict the flow of oil to the chain and cause the chainsaw to overheat.

To clean the oiler screen, follow these steps:

1. Remove the oil cap from the chainsaw.
2. Locate the oiler screen on the side of the chainsaw.
3. Use a small screwdriver or pick to remove the oiler screen.
4. Clean the oiler screen with a clean rag or brush.
5. Reinstall the oiler screen.

4. Replace the oiler gasket.

The oiler gasket is a small gasket that seals the oiler pump to the chainsaw. If the oiler gasket is damaged or worn out, it can allow oil to leak from the chainsaw.

To replace the oiler gasket, follow these steps:

1. Remove the oil cap from the chainsaw.
2. Locate the oiler pump on the side of the chainsaw.
3. Use a small screwdriver or pick to remove the oiler gasket.
4. Apply a small amount of sealant to the new oiler gasket.
5. Install the new oiler gasket.

5. Replace the oiler pump.

If the oiler pump is damaged beyond repair, it will need to be replaced. To replace the oiler pump, follow these steps:

1. Remove the oil cap from the chainsaw.
2. Remove the oiler pump from the chainsaw.
3. Install the new oiler pump.
4. Reinstall the oil cap.

Preventing Husqvarna 345 Chainsaw Oiler Problems

You can help prevent Husqvarna 345 chainsaw oiler problems by following these tips:

Keep the oil level in the chainsaw full.
Inspect the oiler pump regularly for damage.
Clean the oiler screen regularly.
Replace the oiler gasket as needed.
Replace the oiler pump as needed.

By following these tips, you can help keep your Husqvarna 345 chainsaw running smoothly and safely.

Also Check: Husqvarna 350 Chainsaw Oiler Not Working

FAQs: Husqvarna 345 Chainsaw Oiler Not Working

Why is my Husqvarna 345 chainsaw oiler not working?

There are a few possible reasons why your Husqvarna 345 chainsaw oiler might not be working. Here are some of the most common causes:

The oiler is not getting enough oil. Make sure that the oil tank is full and that the oil line is not kinked or blocked.
The oiler is clogged. Clean the oiler according to the manufacturer’s instructions.
The oiler is not adjusted correctly. Check the oiler adjustment and make sure that it is set correctly.
The oiler is defective. If the oiler is not working after you have checked all of the other possibilities, it may be defective and need to be replaced.

How do I fix my Husqvarna 345 chainsaw oiler?

To fix your Husqvarna 345 chainsaw oiler, you will need to identify the cause of the problem and then take the necessary steps to fix it. Here are the steps to troubleshoot and fix a Husqvarna 345 chainsaw oiler:

1. Check the oil tank. Make sure that the oil tank is full and that the oil line is not kinked or blocked. If the oil tank is empty, fill it up with the correct type of oil. If the oil line is kinked or blocked, straighten it out or replace it.
2. Clean the oiler. Remove the oiler cover and clean the oiler according to the manufacturer’s instructions.
3. Adjust the oiler. Check the oiler adjustment and make sure that it is set correctly.
4. Replace the oiler. If the oiler is defective, replace it with a new one.

What happens if my Husqvarna 345 chainsaw oiler is not working?

If your Husqvarna 345 chainsaw oiler is not working, it can cause a number of problems. Here are some of the potential consequences of a malfunctioning oiler:

The chainsaw can overheat. If the chainsaw does not get enough oil, it can overheat and damage the engine.
The chainsaw can seize up. If the chainsaw overheats, it can seize up and become unusable.
The chainsaw can start a fire. If the chainsaw seizes up, it can create sparks that can start a fire.

How can I prevent my Husqvarna 345 chainsaw oiler from failing?

There are a few things you can do to prevent your Husqvarna 345 chainsaw oiler from failing. Here are some tips:

Use the correct type of oil. Make sure that you are using the correct type of oil for your chainsaw.
Keep the oil tank full. Make sure that the oil tank is always full to prevent the oiler from running dry.
Clean the oiler regularly. Clean the oiler regularly according to the manufacturer’s instructions.
Inspect the oiler regularly. Inspect the oiler regularly for signs of wear and tear. Replace the oiler if it is damaged or defective.

Where can I get help with my Husqvarna 345 chainsaw oiler?

If you are having trouble with your Husqvarna 345 chainsaw oiler, you can get help from a number of sources. Here are some options:

Contact Husqvarna customer service. Husqvarna offers customer service support for all of its products. You can contact Husqvarna customer service by phone, email, or chat.
Visit a Husqvarna dealer. Husqvarna dealers can help you with all of your chainsaw needs, including troubleshooting and repairs.
Read the owner’s manual. The owner’s manual for your chainsaw contains valuable information about how to operate and maintain your chainsaw.