Husqvarna 350 Chainsaw Oiler Not Working: [Problems & Solutions]

As a chainsaw repair professional, I’ve seen my fair share of Husqvarna 350 chainsaws with oiler problems. It’s a common issue that can be frustrating and inconvenient for chainsaw owners. But don’t worry, I’m here to help. In this troubleshooting guide, I’ll walk you through the steps to quickly diagnose and resolve the issue so you can get your chainsaw back up and running in no time.

First, let’s talk about what the oiler does and why it’s important. The oiler is responsible for lubricating the chain and bar. This is essential for preventing wear and tear on these components, which can lead to premature failure. If the oiler isn’t working properly, your chain and bar will not be properly lubricated and will wear out much faster.

So, if you’re experiencing problems with your Husqvarna 350 chainsaw’s oiler, it’s important to address the issue as soon as possible. Not only will it save you time and money in the long run, but it will also help to keep your chainsaw in good working order.

Most Common Reasons Of Husqvarna 350 Chainsaw Oiler Not Working

Chainsaw Oiler Not Working

Chainsaw Oiler Hose Clogged

The most common reason for a chainsaw oiler not working is a clogged oiler hose. This can be caused by dirt, sawdust, or other debris getting into the hose and blocking the flow of oil.
To fix this problem, you will need to clean the oiler hose. You can do this by removing the hose from the chainsaw and flushing it with a solvent such as mineral spirits or acetone.

Chainsaw Oiler Pump Malfunctioning

Another common reason for a chainsaw oiler not working is a malfunctioning oiler pump. This can be caused by a broken spring, a damaged diaphragm, or a clogged oil filter.
To fix this problem, you will need to remove the oiler pump from the chainsaw and inspect it for damage. If any of the parts are damaged, you will need to replace them.

Chainsaw Oiler Not Attached Properly

A third common reason for a chainsaw oiler not working is that it is not attached properly to the chainsaw. This can cause the oiler to leak or not deliver oil to the chain properly.
To fix this problem, you will need to make sure that the oiler is properly attached to the chainsaw. You can do this by following the instructions in the chainsaw’s owner’s manual.

Chainsaw Oiler Reservoir Empty

Finally, a chainsaw oiler will not work if the reservoir is empty. This is because there is no oil to be pumped to the chain.
To fix this problem, you will need to add oil to the reservoir. You can do this by following the instructions in the chainsaw’s owner’s manual.

How to Troubleshoot: Husqvarna 350 Chainsaw Oiler Not Working

Symptoms of a Husqvarna 350 Chainsaw Oiler Not Working

There are a few symptoms that you may notice if your Husqvarna 350 chainsaw oiler is not working properly. These include:

The chainsaw chain is not being lubricated properly.
The chainsaw chain is smoking or burning.
The chainsaw chain is making a loud noise.
The chainsaw chain is skipping or jumping.

Causes of a Husqvarna 350 Chainsaw Oiler Not Working

There are a number of things that can cause the oiler on your Husqvarna 350 chainsaw to stop working. These include:

A clogged oiler filter.
A dirty oil tank.
A faulty oil pump.
A broken oil line.
A faulty oiler switch.

Troubleshooting a Husqvarna 350 Chainsaw Oiler Not Working

If you suspect that the oiler on your Husqvarna 350 chainsaw is not working properly, you can troubleshoot the problem by following these steps:

1. Check the oiler filter. If the filter is clogged, it will prevent oil from flowing to the chainsaw chain. To clean the filter, remove it from the chainsaw and rinse it with warm, soapy water. Allow the filter to dry completely before reinstalling it.
2. Check the oil tank. If the oil tank is dirty, it can restrict the flow of oil to the chainsaw chain. To clean the oil tank, remove the tank from the chainsaw and pour out the old oil. Rinse the tank with warm, soapy water. Allow the tank to dry completely before refilling it with new oil.
3. Check the oil pump. If the oil pump is faulty, it will not be able to pump oil to the chainsaw chain. To test the oil pump, start the chainsaw and let it run for a few minutes. Watch the oil line to see if oil is flowing to the chainsaw chain. If no oil is flowing, the oil pump is faulty and will need to be replaced.
4. Check the oil line. If the oil line is broken, it will prevent oil from flowing to the chainsaw chain. To check the oil line, look for any cracks or leaks. If you find a crack or leak, the oil line will need to be replaced.
5. Check the oiler switch. If the oiler switch is faulty, it will not allow oil to flow to the chainsaw chain. To test the oiler switch, start the chainsaw and turn the oiler switch on. Watch the oil line to see if oil is flowing to the chainsaw chain. If no oil is flowing, the oiler switch is faulty and will need to be replaced.

How to Fix a Husqvarna 350 Chainsaw Oiler Not Working

Once you have identified the cause of the problem, you can fix the oiler on your Husqvarna 350 chainsaw by following these steps:

1. If the oiler filter is clogged, clean it according to the instructions in the previous section.
2. If the oil tank is dirty, clean it according to the instructions in the previous section.
3. If the oil pump is faulty, replace it with a new oil pump.
4. If the oil line is broken, replace it with a new oil line.
5. If the oiler switch is faulty, replace it with a new oiler switch.

Conclusion

By following these steps, you can troubleshoot and fix a Husqvarna 350 chainsaw oiler that is not working properly. If you are unable to fix the problem yourself, you can take your chainsaw to a qualified chainsaw repair technician for assistance.

Also Check: Husqvarna 445 Chainsaw Oiler Not Working

FAQs: Husqvarna 350 Chainsaw Oiler Not Working

Why is my Husqvarna 350 chainsaw oiler not working?

There are a few possible reasons why your Husqvarna 350 chainsaw oiler may not be working. Here are some of the most common causes:

The oiler is not getting enough oil. This can happen if the oil level is low, the oil filter is clogged, or the oil line is kinked or blocked.
The oiler is not pumping oil. This can happen if the oiler pump is damaged, the oiler hose is kinked or blocked, or the oiler valve is stuck.
The oiler is not being triggered. This can happen if the oiler switch is not working properly, or if the oiler is not aligned with the bar.

How do I fix my Husqvarna 350 chainsaw oiler?

To fix your Husqvarna 350 chainsaw oiler, you will need to identify the cause of the problem and then take the appropriate steps to fix it. Here are some troubleshooting tips:

Check the oil level. If the oil level is low, add oil to the chainsaw until it reaches the full mark on the dipstick.
Clean the oil filter. If the oil filter is clogged, remove it from the chainsaw and clean it with a clean rag.
Check the oil line. If the oil line is kinked or blocked, straighten it out or replace it.
Check the oiler pump. If the oiler pump is damaged, you will need to replace it.
Check the oiler hose. If the oiler hose is kinked or blocked, straighten it out or replace it.
Check the oiler valve. If the oiler valve is stuck, you will need to clean it or replace it.
Check the oiler switch. If the oiler switch is not working properly, you will need to replace it.
Check the alignment of the oiler. If the oiler is not aligned with the bar, adjust it so that it is properly aligned.

What are the symptoms of a bad Husqvarna 350 chainsaw oiler?

There are a few symptoms that can indicate that your Husqvarna 350 chainsaw oiler is bad. Here are some of the most common symptoms:

The chainsaw is running hot.
The chainsaw is smoking.
The chainsaw is making a loud noise.
The chainsaw is losing power.
The chainsaw is cutting poorly.

What are the dangers of a bad Husqvarna 350 chainsaw oiler?

A bad Husqvarna 350 chainsaw oiler can be dangerous for a number of reasons. Here are some of the most serious dangers:

The chainsaw can overheat and catch fire.
The chainsaw can produce toxic fumes.
The chainsaw can lose power and become difficult to control.
The chainsaw can cut poorly and cause injury.

How can I prevent a bad Husqvarna 350 chainsaw oiler?

There are a few things you can do to help prevent a bad Husqvarna 350 chainsaw oiler. Here are some tips:

Keep the oil level full. Make sure that the oil level in the chainsaw is always full.
Clean the oil filter regularly. Clean the oil filter regularly to prevent it from becoming clogged.
Check the oil line regularly. Check the oil line regularly for kinks or blockages.
Inspect the oiler pump regularly. Inspect the oiler pump regularly for damage.
Replace the oiler hose regularly. Replace the oiler hose regularly if it becomes kinked or blocked.
Replace the oiler valve regularly. Replace the oiler valve regularly if it becomes stuck.
Align the oiler properly. Make sure that the oiler is properly aligned with the bar.