Husqvarna 445 Chainsaw Oiler Not Working: [Causes & Proven Fixes]
As a chainsaw owner, there’s nothing more frustrating than having your saw not work properly. One of the most common problems that can occur is the oiler not working. This can be a major inconvenience, as it can lead to your saw overheating and eventually becoming damaged.
In this guide, I will walk you through the steps to troubleshoot and fix a Husqvarna 445 chainsaw oiler that is not working. I will also provide some tips on how to prevent this problem from happening in the future.
By following these steps, you can quickly and easily get your saw back up and running, so you can get back to cutting wood.
Most Common Reasons Of Husqvarna 445 Chainsaw Oiler Not Working
Most Common Reasons Of Husqvarna 445 Chainsaw Oiler Not Working
1. Oiler Hose or Tube Clogged
The most common reason for a chainsaw oiler not working is a clogged oiler hose or tube. This can be caused by dirt, sawdust, or other debris getting into the hose and blocking the flow of oil. To fix this problem, you will need to remove the hose and clean it out. You can do this by using a small brush or wire to loosen the debris, and then flushing the hose with warm water.
2. Oiler Pump Not Working
Another common reason for a chainsaw oiler not working is a faulty oiler pump. The oiler pump is responsible for pumping oil from the reservoir to the chain, and if it is not working properly, the chain will not be lubricated properly. To check if the oiler pump is working, you can listen for it to run when you start the chainsaw. If you do not hear the pump running, you will need to replace it.
3. Oiler Reservoir Empty
A third possible reason for a chainsaw oiler not working is an empty oiler reservoir. If the reservoir is empty, the pump will not have any oil to pump, and the chain will not be lubricated properly. To fix this problem, you will need to add oil to the reservoir.
4. Oiler O-Ring Damaged
The oiler O-ring is a small rubber ring that seals the oiler pump to the reservoir. If this O-ring is damaged, it can allow oil to leak out of the pump, which will cause the chain to not be lubricated properly. To fix this problem, you will need to replace the O-ring.
5. Misaligned Oiler Tube
The oiler tube is a small tube that connects the oiler pump to the chain. If this tube is misaligned, it can cause the oil to spray in the wrong direction, which will not lubricate the chain properly. To fix this problem, you will need to realign the oiler tube.
How to Troubleshoot: Husqvarna 445 Chainsaw Oiler Not Working
Symptoms
There are a few different symptoms that you may experience if your Husqvarna 445 chainsaw oiler is not working properly. These include:
The chainsaw is not making any oil stream when you pull the trigger.
The oil level in the oil reservoir is low, even though you have recently filled it.
The oil is not flowing evenly from the oiler to the chain.
The oil is leaking from the chainsaw.
Troubleshooting
If you are experiencing any of the symptoms listed above, you can try troubleshooting the problem yourself by following these steps:
1. Check the oil level. Make sure that the oil level in the oil reservoir is at least halfway full. If the oil level is low, fill the reservoir with fresh oil.
2. Check the oil filter. The oil filter is located on the side of the chainsaw, near the oil reservoir. Remove the oil filter and inspect it for damage. If the oil filter is clogged, replace it with a new one.
3. Check the oil line. The oil line connects the oil reservoir to the oiler. Inspect the oil line for damage or kinks. If the oil line is damaged, replace it with a new one.
4. Check the oiler. The oiler is located on the underside of the chainsaw. Inspect the oiler for damage or debris. If the oiler is damaged, replace it with a new one.
Preventative Maintenance
The best way to prevent problems with your Husqvarna 445 chainsaw oiler is to perform regular maintenance. This includes:
Checking the oil level regularly and filling the reservoir as needed.
Changing the oil filter every 25 hours of use.
Replacing the oil line every 50 hours of use.
Cleaning the oiler every 100 hours of use.
By following these simple maintenance tips, you can help to keep your Husqvarna 445 chainsaw oiler running smoothly and efficiently.
Also Check: Husqvarna Chainsaw 455 Rancher Bar Oiler Not Working
FAQs: Husqvarna 445 Chainsaw Oiler Not Working
Why is my Husqvarna 445 chainsaw oiler not working?
There are a few possible reasons why your Husqvarna 445 chainsaw oiler might not be working. Here are some of the most common causes:
The oiler is not plugged in. Make sure that the oiler is plugged into an outlet and that the outlet is turned on.
The oiler is not turned on. Check the oiler’s switch to make sure that it is turned on.
The oiler is clogged. The oiler can become clogged with sawdust or other debris, which can prevent it from working properly. To clean the oiler, remove the oiler cap and use a small brush to clean out the inside of the oiler.
The oiler is not getting enough oil. The oiler needs to be able to get enough oil to the chain in order to work properly. If the oil level is too low, the oiler will not be able to function properly.
The oiler is not adjusted properly. The oiler may need to be adjusted in order to provide the correct amount of oil to the chain. To adjust the oiler, follow the instructions in the owner’s manual.
How do I fix my Husqvarna 445 chainsaw oiler?
If your Husqvarna 445 chainsaw oiler is not working, you can try the following troubleshooting steps:
Check the oiler is plugged in and turned on.
Clean the oiler if it is clogged.
Check the oil level and add oil if necessary.
Adjust the oiler if it is not adjusted properly.
If you have tried these troubleshooting steps and the oiler is still not working, you may need to take your chainsaw to a qualified service center for repairs.
What is the difference between a Husqvarna 445 chainsaw and a Husqvarna 450 chainsaw?
The Husqvarna 445 chainsaw and the Husqvarna 450 chainsaw are both powerful chainsaws that are designed for professional use. However, there are some key differences between the two models.
The Husqvarna 445 chainsaw has a 16-inch bar, while the Husqvarna 450 chainsaw has a 18-inch bar. The longer bar on the Husqvarna 450 chainsaw makes it more suitable for cutting through larger logs.
The Husqvarna 445 chainsaw has a 4.5-horsepower engine, while the Husqvarna 450 chainsaw has a 5.0-horsepower engine. The more powerful engine on the Husqvarna 450 chainsaw makes it more suitable for cutting through tough materials.
The Husqvarna 445 chainsaw weighs 11.5 pounds, while the Husqvarna 450 chainsaw weighs 12.5 pounds. The Husqvarna 445 chainsaw is slightly lighter than the Husqvarna 450 chainsaw, making it more comfortable to use for extended periods of time.
Ultimately, the best chainsaw for you will depend on your specific needs and preferences. If you need a chainsaw that can handle larger logs, the Husqvarna 450 chainsaw is a better option. However, if you are looking for a lightweight and portable chainsaw, the Husqvarna 445 chainsaw is a better choice.
How much does a Husqvarna 445 chainsaw cost?
The Husqvarna 445 chainsaw costs around $250. This price may vary depending on the retailer and the specific model of chainsaw.
Where can I buy a Husqvarna 445 chainsaw?
You can buy a Husqvarna 445 chainsaw at a variety of retailers, including hardware stores, home improvement stores, and online retailers.