Husqvarna Chainsaw 55 Chain Brake Not Working: [Causes & Proven Solutions]

As a chainsaw owner, there are few things more frustrating than having your chain brake fail. Not only is it a safety hazard, but it can also make it difficult to use your chainsaw effectively. If your Husqvarna chainsaw 55 chain brake is not working, there are a few things you can check to try to resolve the issue. In this guide, I will walk you through the steps to troubleshoot a Husqvarna chainsaw 55 chain brake that is not working. I will also provide tips on how to prevent this issue from happening in the future.

By the end of this guide, you will be able to:

Identify the most common causes of a Husqvarna chainsaw 55 chain brake failure.
Perform a series of simple checks to troubleshoot the issue.
Restore functionality to your chainsaw’s chain brake.
Take steps to prevent future problems.

Most Common Reasons Of Husqvarna Chainsaw 55 Chain Brake Not Working

Most Common Reasons Of Husqvarna Chainsaw 55 Chain Brake Not Working

1. Insufficient oil

The chain brake is a safety device that is activated when the chainsaw is not in use. It is designed to stop the chain from moving if the operator lets go of the handle. The chain brake is activated by a spring-loaded lever that is connected to the oil pump. When the lever is released, the oil pump is activated and oil is sprayed onto the chain. This oil helps to lubricate the chain and prevent it from overheating. If there is not enough oil in the chainsaw, the chain brake will not work properly.

2. Worn or damaged parts

The chain brake is a mechanical device that is made up of several parts. These parts can wear out or become damaged over time. If any of these parts are worn or damaged, the chain brake will not work properly.

3. Improper adjustment

The chain brake is a safety device that is designed to protect the operator from injury. If the chain brake is not adjusted properly, it may not work properly. The chain brake should be adjusted so that it engages when the handle is released. If the chain brake is not adjusted properly, it may not engage when the handle is released and the chain may continue to move.

4. Clogged oil ports

The chain brake is activated by a spring-loaded lever that is connected to the oil pump. The oil pump is responsible for spraying oil onto the chain. If the oil ports are clogged, the oil pump will not be able to spray oil onto the chain and the chain brake will not work properly.

5. Faulty electrical components

Some chainsaws have an electric chain brake. The electric chain brake is activated by a switch that is located on the handle of the chainsaw. If the switch is faulty, the electric chain brake will not work properly.

How to Troubleshoot: Husqvarna Chainsaw 55 Chain Brake Not Working

Symptoms of a Husqvarna Chainsaw 55 Chain Brake Not Working

There are a few symptoms that you can look for to determine if the chain brake on your Husqvarna Chainsaw 55 is not working properly. These include:

The chain brake does not engage when you pull the lever.
The chain brake engages when you do not want it to.
The chain brake is difficult to engage or disengage.
The chain brake makes a loud noise when it engages or disengages.

Causes of a Husqvarna Chainsaw 55 Chain Brake Not Working

There are a few different things that can cause the chain brake on your Husqvarna Chainsaw 55 to stop working properly. These include:

A worn-out or damaged chain brake spring.
A dirty or damaged chain brake lever.
A misaligned chain brake.
A faulty chain brake switch.

How to Fix a Husqvarna Chainsaw 55 Chain Brake Not Working

To fix a Husqvarna Chainsaw 55 chain brake that is not working properly, you will need to identify the cause of the problem and then take the appropriate steps to fix it. Here are the steps to troubleshoot and fix a Husqvarna Chainsaw 55 chain brake that is not working:

1. Check the chain brake spring. The chain brake spring is responsible for engaging and disengaging the chain brake. If the spring is worn out or damaged, it will not be able to do its job properly. To check the chain brake spring, remove the chain brake cover and inspect the spring. If the spring is damaged, you will need to replace it.
2. Clean and lubricate the chain brake lever. The chain brake lever is a critical part of the chain brake system. If the lever is dirty or damaged, it will not be able to engage and disengage the chain brake properly. To clean and lubricate the chain brake lever, remove the lever and clean it with a degreaser. Then, apply a light coat of lubricant to the lever.
3. Align the chain brake. The chain brake must be properly aligned in order to function properly. If the chain brake is misaligned, it will not be able to engage and disengage the chain brake properly. To align the chain brake, loosen the bolts that secure the chain brake to the chainsaw and adjust the position of the chain brake until it is properly aligned.
4. Replace the chain brake switch. The chain brake switch is a small electrical switch that is responsible for activating the chain brake. If the chain brake switch is faulty, it will not be able to activate the chain brake properly. To replace the chain brake switch, remove the switch and install a new one.

Preventing Chain Brake Problems

You can help prevent chain brake problems by following these tips:

Keep the chain brake clean and lubricated.
Inspect the chain brake regularly for wear and damage.
Replace the chain brake spring if it is worn out or damaged.
Align the chain brake properly.
Replace the chain brake switch if it is faulty.

By following these tips, you can help keep your Husqvarna Chainsaw 55 chain brake working properly and prevent any serious injuries.

Also Check: Husqvarna Chainsaw Bar Oiler Not Working

FAQs: Husqvarna Chainsaw 55 Chain Brake Not Working

Why is my Husqvarna chainsaw 55 chain brake not working?

There are a few possible reasons why your Husqvarna chainsaw 55 chain brake may not be working. Here are some of the most common causes:

The brake lever is not engaged. Make sure that the brake lever is in the engaged position. If it is not, you will need to push it down until it clicks into place.
The brake spring is broken. If the brake spring is broken, it will not be able to provide enough force to engage the brake. You will need to replace the brake spring.
The brake pads are worn out. If the brake pads are worn out, they will not be able to provide enough friction to stop the chain. You will need to replace the brake pads.
The brake housing is damaged. If the brake housing is damaged, it will not be able to properly engage the brake. You will need to replace the brake housing.

How do I fix my Husqvarna chainsaw 55 chain brake?

To fix your Husqvarna chainsaw 55 chain brake, you will need to identify the cause of the problem and then take the appropriate steps to fix it. Here are the steps to take for each of the possible causes:

If the brake lever is not engaged, simply push it down until it clicks into place.
If the brake spring is broken, you will need to remove the brake assembly and replace the brake spring.
If the brake pads are worn out, you will need to remove the brake assembly and replace the brake pads.
If the brake housing is damaged, you will need to remove the brake assembly and replace the brake housing.

How can I prevent my Husqvarna chainsaw 55 chain brake from failing?

There are a few things you can do to prevent your Husqvarna chainsaw 55 chain brake from failing. Here are some tips:

Always engage the brake lever when you are not using the chainsaw. This will help to prevent the brake from becoming worn out or damaged.
Inspect the brake regularly for signs of wear or damage. If you see any problems, have the brake repaired or replaced as soon as possible.
Use the chainsaw only for its intended purpose. Do not use it to cut through metal or other hard materials, as this could damage the brake.
Store the chainsaw in a cool, dry place. This will help to prevent the brake from becoming corroded or damaged.

What are the safety risks of a Husqvarna chainsaw 55 chain brake that is not working?

A Husqvarna chainsaw 55 chain brake that is not working can be a serious safety hazard. If the chain brake is not working properly, it may not be able to stop the chain from moving when you release the trigger. This could result in serious injury or death.

Here are some of the safety risks of a Husqvarna chainsaw 55 chain brake that is not working:

The chain could continue to move after you release the trigger, which could cause you to lose control of the chainsaw and injure yourself or someone else.
The chain could come loose from the chainsaw and fly through the air, which could also cause serious injury or death.
The chain could damage property, such as your home or your car.

It is important to make sure that your Husqvarna chainsaw 55 chain brake is working properly before you use it. If you have any questions about the chain brake, or if you are not sure if it is working properly, you should have it inspected by a qualified technician.

What are the steps to check the Husqvarna chainsaw 55 chain brake?

To check the Husqvarna chainsaw 55 chain brake, you will need to follow these steps:

1. Turn off the chainsaw and remove the spark plug.
2. Engage the brake lever.
3. Pull the starter rope to start the chainsaw.
4. Release the brake lever.
5. The chain should stop moving.

If the chain does not stop moving, the brake is not working properly and you will need to have it repaired or replaced.