Husqvarna E235 Chainsaw Chain Oiler Not Working: [Cause & Proven Fixes]

As a chainsaw repair professional, I’ve seen my fair share of Husqvarna E235 chainsaws with a non-functioning chain oiler. This is a common problem that can be frustrating and inconvenient for chainsaw owners.

The good news is that the problem is usually easy to diagnose and fix. In this troubleshooting guide, I’ll walk you through the steps to identify the cause of the problem and get your chainsaw’s chain oiler up and running again.

Most Common Reasons Of Husqvarna E235 Chainsaw Chain Oiler Not Working

Most Common Reasons Of Husqvarna E235 Chainsaw Chain Oiler Not Working

1. Insufficient Oil

The most common reason for a chainsaw chain oiler not working is that there is not enough oil in the reservoir. Check the oil level and add more oil if necessary.

2. Clogged Oil Line

Another common cause of a chainsaw chain oiler not working is a clogged oil line. The oil line can become clogged with sawdust, dirt, or other debris. To clean the oil line, remove the oil cap and blow through the line with compressed air.

3. Faulty Oil Pump

If the oil pump is faulty, it will not be able to pump oil to the chain. To check the oil pump, remove the oil cap and start the chainsaw. If the oil pump is working properly, you should see oil flowing from the oil port.

4. Misaligned Oiler

The oiler on a chainsaw is often mounted on a pivot. If the oiler is not properly aligned, it may not be able to properly oil the chain. To check the alignment of the oiler, start the chainsaw and watch the oil stream. The oil stream should be directed at the top of the chain.

5. Defective Oiler

If the oiler is defective, it will not be able to properly oil the chain. To check if the oiler is defective, replace it with a new one.

How to Troubleshoot: Husqvarna E235 Chainsaw Chain Oiler Not Working

Symptoms

There are a few symptoms that may indicate that the chain oiler on your Husqvarna E235 chainsaw is not working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain.
The chain is making a loud squealing noise, which is caused by the chain rubbing against the bar without lubrication.
The chain is skipping or jumping, which is also caused by a lack of lubrication.

Causes

There are a number of possible causes for a Husqvarna E235 chainsaw chain oiler not working properly. These include:

The oiler is not turned on. Make sure that the oiler switch is in the On position.
The oiler hose is clogged. The oiler hose can become clogged with sawdust or other debris, which will prevent the oil from reaching the chain. To clean the oiler hose, remove it from the chainsaw and rinse it with warm water.
The oiler pump is not working properly. The oiler pump can fail due to a number of reasons, such as a broken spring or a clogged oil filter. If you suspect that the oiler pump is not working properly, you will need to take the chainsaw to a qualified service center for repairs.

Troubleshooting

To troubleshoot a Husqvarna E235 chainsaw chain oiler not working properly, follow these steps:

1. Check to make sure that the oiler is turned on. The oiler switch is located on the side of the chainsaw. It should be in the On position.
2. Check the oiler hose for clogs. Remove the oiler hose from the chainsaw and rinse it with warm water. If the hose is clogged, clean it with a small brush or wire hanger.
3. Check the oiler pump for damage. If you suspect that the oiler pump is not working properly, you will need to take the chainsaw to a qualified service center for repairs.

Prevention

You can help prevent your Husqvarna E235 chainsaw chain oiler from malfunctioning by following these tips:

Keep the oiler hose clean. Make sure to clean the oiler hose regularly to prevent it from becoming clogged.
Use the correct type of oil. Use only high-quality chainsaw oil in your Husqvarna E235 chainsaw.
Maintain your chainsaw regularly. Make sure to maintain your chainsaw according to the manufacturer’s recommendations.

By following these tips, you can help keep your Husqvarna E235 chainsaw chain oiler working properly and extend the life of your chainsaw.

Also Check: John Deere Chainsaw Bar Oiler Not Working

FAQs: Husqvarna E235 Chainsaw Chain Oiler Not Working

Why isn’t my Husqvarna E235 chainsaw chain oiler working?

There are a few possible reasons why your Husqvarna E235 chainsaw chain oiler might not be working. Here are some of the most common causes:

The oiler is not turned on. Make sure that the oiler switch is in the On position.
The oiler is clogged. The oiler can become clogged with sawdust or other debris, which can prevent the oil from flowing to the chain. To clean the oiler, remove the oiler cover and clean the inside of the oiler with a small brush.
The oiler is not getting enough oil. The oiler may not be getting enough oil if the oil level is low. Check the oil level and add oil if necessary.
The oil pump is not working properly. The oil pump is responsible for pumping oil to the chain. If the oil pump is not working properly, it may not be able to pump enough oil to the chain.

How do I fix my Husqvarna E235 chainsaw chain oiler?

To fix your Husqvarna E235 chainsaw chain oiler, you will need to identify the cause of the problem. Once you have identified the cause, you can follow the steps below to fix the problem.

Turn on the oiler. Make sure that the oiler switch is in the On position.
Clean the oiler. Remove the oiler cover and clean the inside of the oiler with a small brush.
Add oil to the oil tank. Check the oil level and add oil if necessary.
Replace the oil pump. If the oil pump is not working properly, you will need to replace it.

How often should I oil the chain on my Husqvarna E235 chainsaw?

You should oil the chain on your Husqvarna E235 chainsaw every time you use it. You should also oil the chain if it starts to run dry.

What type of oil should I use for my Husqvarna E235 chainsaw?

You should use a high-quality chainsaw oil for your Husqvarna E235 chainsaw. The oil should be SAE 30 weight or heavier.

How much oil should I use for my Husqvarna E235 chainsaw?

You should use enough oil to keep the chain lubricated. The oil level should be between the Full and Add marks on the oil tank.