Jonsered Chainsaw Oiler Not Working: [Quick Fixes]

As a chainsaw owner, there are few things more frustrating than having your saw not oil properly. Not only can this lead to damage to the saw itself, but it can also be a safety hazard. If the chain is not properly lubricated, it can become hot and dangerous to use.

If you’re experiencing problems with your Jonsered chainsaw oiler, you’re not alone. This is a common issue that can be easily diagnosed and resolved. In this guide, I will walk you through the steps to troubleshoot the problem and get your saw back up and running in no time.

I understand how important it is to get your saw up and running as quickly as possible, so I’ve tried to make this guide as concise and easy to follow as possible. With a little bit of time and effort, you’ll be able to diagnose and resolve the issue in no time.

Most Common Reasons Of Jonsered Chainsaw Oiler Not Working

Most Common Reasons Of Jonsered Chainsaw Oiler Not Working

1. Oiler Hose is Clogged

The most common reason for a Jonsered chainsaw oiler not working is a clogged oiler hose. This can happen if the oil becomes thick and sticky, or if sawdust or other debris gets caught in the hose. To fix this problem, you can try to clear the clog by flushing the hose with a solvent, or by replacing the hose if it is damaged.

2. Oiler Pump is Not Working

If the oiler pump is not working, the oil will not be able to reach the chain. This can happen if the pump is damaged, or if the oil level is too low. To fix this problem, you can try to repair or replace the pump, or add more oil to the chainsaw.

3. Oiler Filter is Clogged

The oiler filter can also become clogged, which will prevent the oil from reaching the chain. To fix this problem, you can try to clean the filter by flushing it with a solvent, or by replacing the filter if it is damaged.

4. Oil Level is Too Low

If the oil level is too low, the oiler will not be able to pump enough oil to the chain. To fix this problem, you can add more oil to the chainsaw.

5. Oil is Too Thick

If the oil is too thick, it will not be able to flow through the oiler pump and hose. To fix this problem, you can try to thin the oil by adding a solvent, or by using a different type of oil.

6. Oiler is Not Installed Correctly

If the oiler is not installed correctly, it will not be able to pump oil to the chain. To fix this problem, you can try to reinstall the oiler, or you can have a qualified technician do it for you.

How to Troubleshoot: Jonsered Chainsaw Oiler Not Working

Symptoms of a Jonsered Chainsaw Oiler Not Working

There are a few symptoms that may indicate that your Jonsered chainsaw oiler is not working properly. These include:

The chainsaw is running hot, even when it is not under load.
The chain is smoking or sparking.
The chain is not cutting through wood as smoothly as it used to.
The chain is leaving a lot of sawdust behind.
The chain is becoming dull more quickly than usual.

Troubleshooting a Jonsered Chainsaw Oiler

If you are experiencing any of the symptoms listed above, it is important to troubleshoot the problem to determine what is causing the oiler to malfunction. Here are a few things you can check:

Check the oil level. The oil level in the chainsaw’s reservoir should be between the full and add marks. If the oil level is low, add more oil to the reservoir.
Check the oil pump. The oil pump is responsible for sending oil to the chain. If the pump is not working properly, it will not be able to deliver oil to the chain. To check the oil pump, start the chainsaw and listen for the sound of the pump. You should be able to hear a faint whirring sound. If you do not hear the sound of the pump, the pump may be faulty and will need to be replaced.
Check the oil filter. The oil filter is located in the oil reservoir. It helps to keep dirt and debris from clogging the oil pump. If the oil filter is clogged, it will not be able to filter the oil properly and the oil will not be able to reach the chain. To check the oil filter, remove it from the oil reservoir and inspect it for dirt and debris. If the filter is clogged, replace it with a new one.
Check the oil line. The oil line is a small hose that connects the oil pump to the chain. If the oil line is damaged, it will not be able to deliver oil to the chain. To check the oil line, inspect it for cracks or leaks. If the oil line is damaged, it will need to be replaced.

How to Fix a Jonsered Chainsaw Oiler

If you have determined that the oiler is not working properly, you will need to fix it in order to continue using your chainsaw. Here are a few things you can do to fix a Jonsered chainsaw oiler:

Add oil to the reservoir. If the oil level is low, add more oil to the reservoir. This will help to ensure that the oil pump has enough oil to work properly.
Replace the oil pump. If the oil pump is faulty, it will need to be replaced. You can purchase a replacement oil pump from a Jonsered dealer or online retailer.
Replace the oil filter. If the oil filter is clogged, it will need to be replaced. You can purchase a replacement oil filter from a Jonsered dealer or online retailer.
Replace the oil line. If the oil line is damaged, it will need to be replaced. You can purchase a replacement oil line from a Jonsered dealer or online retailer.

Preventing Jonsered Chainsaw Oiler Problems

You can help prevent Jonsered chainsaw oiler problems by following these tips:

Keep the oil level in the reservoir topped off. This will help to ensure that the oil pump has enough oil to work properly.
Change the oil filter regularly. This will help to keep the oil pump clean and free of debris.
Inspect the oil line regularly for cracks or leaks. If you find any damage to the oil line, replace it immediately.
Store your chainsaw in a cool, dry place. This will help to prevent the oil from becoming contaminated.

By following these tips, you can help to keep your Jonsered chainsaw oiler working properly and avoid costly repairs.

Also Check: Mac 610 Chainsaw Chain Oiler Not Working

FAQs: Jonsered Chainsaw Oiler Not Working

Why is my Jonsered chainsaw oiler not working?

There are a few possible reasons why your Jonsered chainsaw oiler may not be working. Here are some of the most common causes:

The oiler is not properly adjusted. The oiler may not be delivering enough oil to the chain, or it may be delivering too much oil. To check the oiler adjustment, follow the instructions in your chainsaw’s owner’s manual.
The oiler is clogged. The oiler may be clogged with sawdust or other debris, which can prevent it from delivering oil to the chain. To clean the oiler, remove the oiler cover and clean the inside of the oiler with a clean rag.
The oiler is damaged. The oiler may be damaged if it has been dropped or if it has been subjected to other physical damage. If you suspect that the oiler is damaged, you should have it replaced by a qualified technician.
The oil chain is too tight. If the oil chain is too tight, it can cause the oiler to not work properly. To check the oil chain tension, follow the instructions in your chainsaw’s owner’s manual.
The oil chain is too loose. If the oil chain is too loose, it can cause the oiler to not work properly. To check the oil chain tension, follow the instructions in your chainsaw’s owner’s manual.

How do I adjust the oiler on my Jonsered chainsaw?

To adjust the oiler on your Jonsered chainsaw, follow these steps:

1. Remove the oiler cover.
2. Locate the oiler adjustment screw.
3. Turn the oiler adjustment screw clockwise to increase the oil flow, or counterclockwise to decrease the oil flow.
4. Reinstall the oiler cover.

How do I clean the oiler on my Jonsered chainsaw?

To clean the oiler on your Jonsered chainsaw, follow these steps:

1. Remove the oiler cover.
2. Use a clean rag to wipe out the inside of the oiler.
3. If the oiler is still clogged, you can use a small amount of solvent to clean it.
4. Reinstall the oiler cover.

What should I do if my Jonsered chainsaw oiler is damaged?

If you suspect that the oiler on your Jonsered chainsaw is damaged, you should have it replaced by a qualified technician. Do not attempt to repair the oiler yourself, as you could damage the chainsaw.

What can I do to prevent my Jonsered chainsaw oiler from not working?

Here are a few things you can do to prevent your Jonsered chainsaw oiler from not working:

Keep the oiler clean. Make sure to clean the oiler regularly to prevent it from becoming clogged.
Adjust the oiler properly. Make sure to adjust the oiler so that it is delivering the correct amount of oil to the chain.
Use the correct oil. Make sure to use the correct type of oil for your chainsaw.
Maintain your chainsaw properly. Make sure to maintain your chainsaw regularly according to the manufacturer’s instructions.

By following these tips, you can help to prevent your Jonsered chainsaw oiler from not working.